Studies on flexible unsaturated polyester resin from polyether glycol and its flexible curing system;
聚醚二元醇不饱和聚酯树脂及其柔性固化体系
Modified unsaturated polyester resin by N-phenyl maleimide;
N-苯马来酰亚胺改性不饱和聚酯树脂
Advances in modification of unsaturated polyester resin;
不饱和聚酯树脂改性研究进展
Stabilization process advance of unsaturated polyester resin;
不饱和聚酯树脂的稳定化技术进展
The preparation and stability of unsaturated polyester W/O emulsions;
不饱和聚酯树脂 W/ O型乳液的制备及其稳定性
The various influencing factors and main synthesis processes of dicy clopentadiene modified unsaturated polyester resin are investigated.
探讨了双环戊二烯改性不饱和聚酯树脂的各种影响因素及其合成的主要工艺条件。
The effect of SiO_2 addition on the mechanical properties of UPR;
二氧化硅对不饱和聚酯树脂浇铸体力学性能的影响
The development and application of unstaturated polyester resion (UPR) are summarized.
综述了近年来不饱和聚酯树脂的发展及应用。
Benzoperoxide/N,N-dimethylaniline initiator system that can eliminate the danger of using MEKPO/Co salt system used in UPR at room temperature was studied in this paper.
采用过氧化苯甲酰/N,N-二甲基苯胺(DMA)固化体系室温条件下对不饱和聚酯树脂(UPR)进行固化,可以降低常用的过氧化酮/钴盐体系的危险性。
This paper studies the self-made low profile additive and its influence on shrinkage rate and mechanical properties of UP resin.
本文研究了自制低收缩添加剂用量对不饱和聚酯树脂固化收缩率与力学性能的影响。
The paper investigates the influence of structure, mould design, moulding process, regulating and coating on the warpage of UP resin DMC moulded panel, related control measures are also provided.
探讨了结构、模具设计、模压工艺条件、整形处理及涂漆等因素对不饱和聚酯树脂DMC模塑面板翘曲变形的影响,并提出相应的控制措施。
The casting and FRP flame retardancy rule of UP resin are studled and a resin system for panel which is of good flame retardancy property,mechanical property satisfied for design,effectiye process,and low cost etc.
本文以不饱和聚酯树脂为研究对象，探讨其浇铸体和玻璃钢的阻燃规律，寻求阻燃性能优异、力学性能满足要求、工艺可行、成本低的面板用树脂体系。
flexible unsaturated polyester resin
柔性不饱和聚酯树脂
self-extinguishing unsaturated polyester resin
自熄性不饱和聚酯树脂
toughened unsaturated polyester resins
韧性不饱和聚酯树脂
unsaturated polyester resins for general purpose
通用型不饱和聚酯树脂
light-stable unsaturated polyester resins
光稳定不饱和聚酯树脂
testing methods for liquid unsaturated polyestesr resin
不饱和聚酯树脂试验方法
Determination for acid value of unsaturated polyester resins
GB/T2895-1982不饱和聚酯树脂酸值的测定
Unsaturated polyester resin--Determination of hydroxyl value
GB/T7193.2-1987不饱和聚酯树脂羟值测定方法
Liquid unsaturated polyester resin for button
GB/T14590-1993钮扣用液体不饱和聚酯树脂
liquid unsaturated polyester resins for fiber reinforced plastics
纤维增强塑料用不饱和聚酯树脂
Unsaturated polyester resin--Determination of viscosity
GB/T7193.1-1987不饱和聚酯树脂粘度测定方法
Study on the UV Curing Unsaturated Resins;
不饱和聚酯树脂紫外快速固化的研究
Industry development of unsaturated polyester resin from 2004 to 2005;
2004-2005年国外不饱和聚酯树脂工业进展
INDUSTRIAL DEVELOPMENT OF UNSATURATED POLYESTER RESIN FROM 2001 TO 2002;
2001～2002年国外不饱和聚酯树脂工业进展
The Research Progress of Toughening Modification for Unsaturated Polyester Resin
不饱和聚酯树脂增韧改性的研究进展
Kinetics of the Curing of Polyurethane Modified Unsaturated Polyester Resin
聚氨酯改性不饱和聚酯树脂的反应动力学
Study on MEKP with different proportion of components in the curing of unsaturated polyester resins
成分比例不同的MEKP固化不饱和聚酯树脂研究
Property and application of unsaturated xylene polyester GRP
二甲苯不饱和聚酯树脂玻璃钢的性能和应用