The results show that with the increased brazing temperature from 595℃ to 615℃,the melting erosion rate increases from 10% to 25%,the false brazing rate decreases from 10% to 2%.
结果表明,钎焊温度从595℃提高到615℃时,熔蚀率从10%提高到25%,虚焊率从10%降低到2%;钎料包覆率从8%提高到16%时,熔蚀率从25%提高到50%。
The molten steel corrosion and ultrasonic vibration resistance of a corundum stick,a tungsten alloy stick,a metal Mo stick coated with ZrO2 outside,and a Mo-Al2O3-ZrO2 ceramic metal tube were investigated for ultrasonic treatment of molten steel.
研究了刚玉棒、钨合金棒、外涂ZrO2金属钼棒和Mo-Al2O3-ZrO2金属陶瓷管在钢液中的熔蚀和抗超声波振动的情况。
A unique laser ablation method is proposed to prepare nano crystals in which graphite target is ablated by high power pulsed laser in liquid ,and nano crystalline carbon nitrides are prepared in ammonia solution for the first time.
本文提出一种独特的激光熔蚀法即在液体中激光熔蚀固体靶制备纳米晶，并且首次在氨水中激光熔蚀石墨靶制备出氮化碳纳米晶。
The analysis of optical microscope indicates that through the reasonable iron material proportioning,alkalinity,fuel consumption and moisture to promote the calcium ferrite and iron olivine formation,and to obtain the melting corrosion structure or the granular structure as primarily sinter,the sinter strength could be effectively increased.
通过光学显微镜分析表明,合理控制铁料搭配、燃耗、碱度和物料水分等条件,可以生成较多的铁酸钙和铁橄榄石,得到以熔蚀结构或粒(板条)状结构为主的烧结矿,可以有效的提高烧结矿强度。
MICROSTRUCTURE ANALYSIS OF TWO CARBON BRICKS CORROSIONED WITH DIFFERENT MOLTEN IRON
两种不同铁水熔蚀炭砖微观结构分析
Copper Dissolution:A New Industry Challenge
铜熔蚀——PCB产业的一个新挑战
glass level cut
液面线侵蚀(熔融玻璃对池壁的侵蚀)
To remove by erosion, melting, evaporation, or vaporization.
消融，侵蚀由于腐蚀、熔化、蒸发或汽化而消失
Pressureless Sintering of SiC and Its Mechanism of Corrosion by Molten Salts
碳化硅的常压烧结及其熔盐侵蚀行为
Research on Laser Cladding Wear and Corrosion Resistance Layers on 45# Steel
45钢表面激光熔覆耐磨耐蚀涂层研究
Study on Anticorrosion and Antiwear Coatings Manufactured by High Frequency Induction Cladding
高频感应熔覆制备耐蚀耐磨涂层研究
Study of Corrosion Resistant Coating on 45# Steel Fabricated by Laser Surface Cladding
45~#钢激光表面熔覆耐腐蚀涂层研究
Study on the Property of Cavitation Erosion of Nickel-based Self-fluxing Alloy Ni67
镍基自熔合金Ni67的空蚀磨损特性研究
Corrosion Resistance of NiCrBSiC Alloy by Laser Cladding
激光熔覆NiCrBSiC合金耐蚀性能研究
Effect of laser cladding layer of Al_2O_3 on the corrosion of nickel-based alloys
Al_2O_3对激光熔覆镍基涂层腐蚀性的影响
Selection of Materials of Cast Iron Crucible for High-Temperature Aluminum Melting with Respect to Corrosion Resistance
从耐腐蚀性能看高温熔铝坩埚的选材
CORROSION BEHAVIOR OF NICKEL BASE ALLOY FGH95 IN MOLTEN NaCl-Na_2SO_4
镍基合金FGH95在熔融NaCl-Na_2SO_4中的腐蚀行为
Microstructure and Erosive-corrosive Wear Characteristics of Induction Cladded Ni/Cr_3C_2-NiCr Coating
感应熔覆Ni基合金/碳化物熔覆层的组织与冲蚀磨损性能
silver nitrate fused into sticks and formerly used as a caustic.
熔化成条状的硝酸银，以前用作一种腐蚀剂。
The erosion of metals varied depending largely on the melting point.
金属的烧蚀在很大程度上随熔点而变化。
Study on Corrosion Resistance of Zircon AZS-Bonded Ramming Mix Used for Glass-Kiln
电熔锆刚玉结合锆英石捣打料抗蚀性能的研究
Study on Corrosion Behaviors of Three Types of Stainless Steel in Molten LiCl-Li_2O;
三种不锈钢在熔融LiCl-Li_2O中的腐蚀行为研究