Analysis on Stress and Strain Behavior of Spherical Vessel of Functionally Graded Material under Creep Condition;
蠕变条件下梯度材料球罐应力应变行为分析
Study on Creep Behavior of PPS/SiO_2 Composites;
PPS/SiO_2复合材料蠕变行为的研究
Acoustic Emission Characteristic of C/SiC Composite During Creep at High Temperature;
C/SiC复合材料高温蠕变的声发射特性
Application of grey theory in forecasting creep deformation of geotechnic grate;
灰色理论在土工格栅蠕变预测中的应用
Experimental study on creep deformation of pressure sensibility for ultra-low permeability reservoir
特低渗储层压敏的蠕变性实验
Key factors for micro-displacement resolution of piezoelectric actuators are systematically summarized in following two aspects: intrinsic(hysteresis;creep deformation) and extrinsic(environment;control power;pretightening force;guide mechanism etc.
从内在因素(迟滞和蠕变效应)和外在因素(环境、控制电源、预紧力、导向机构等)两大方面系统的总结了压电驱动微位移灵敏度的影响因素,并针对每种因素给出了相应的实验结果或调研数据,提出了提高分辨率可采取的措施。
Analysis of creep behavior of resin-based 3-D braided composites;
树脂基三维编织复合材料蠕变性能分析
Based on the creep behavior with thermal viscoplasticity analysis,a computational procedure was presented for analyzing temperature fields and residual stress states in multi-pass welds and post-weld heat treatment in steel pipes with similar and dissimilar welded joint.
采用热-粘弹塑性有限元模型,在考虑蠕变效应的基础上,对同种及异种钢管子环焊缝焊接及焊后热处理过程进行了数值模拟。
Methods The creep behaviors of the cryopreserved arteries were observed with different cryopreservation methods by using a dynamic mechanical analyzer(DMA-2980,TA Instruments,New Castle,Delaware,USA).
方法使用动态力学分析仪(DMA-2980,TA In-struments,New Castle,Delaware,USA)比较研究不同低温保存方案下动脉蠕变行为与新鲜对照组的差异。
Analysis on Deflection and Creepage of OSB;
定向刨花板挠度与蠕变试验
, upon bolt s creepage and fatigue damage has been analysed.
提出了一种评估高温紧固螺栓剩余寿命的计算模型 ,并对一实际螺栓进行了具体计算 ,在此基础上分析了装配、运行及材料性能等因素对螺栓蠕变和疲劳损伤的影响。
Automatic test technique of overhead electrical conductors creeping;
架空导线蠕变的自动测试技术
If the support time is very late,for the adjacent rock a large displacement would arise because of the influence of creeping.
若支护时间过早,衬砌因围岩蠕变的影响将产生较大的变形和所承受的荷载较大,从而出现破坏现象;若支护时间过晚,围岩因蠕变的影响产生较大的位移而失稳,从而引发跨塌等工程事故。
Keeping track of creeping based on the characters of the creeping course and zeroing changing, the exact load was confirmed.
分析电阻应变式传感器蠕变特性,利用其加/卸载和蠕变输出变化率的不同,判断蠕变起始点,根据蠕变过程和零点变化的特点进行蠕变跟踪,以此确定传感器实际载荷。
stable creep-resistant titanium alloy
稳定的抗蠕变钛合金
Non-interrupt creep testing of steel at elevated temperatures?
钢的高温连续蠕变试验
prestress forming
预模压加热蠕变成型
testing method for flexural creep of plastics
塑料弯曲蠕变试验法
Study on Creep and Creep-Fatigue Interaction of P91 Steel;
P91钢蠕变特性及蠕变疲劳交互作用研究
The Mechanical Modeling of Indentation Creep Test and Creep Characterization;
压痕蠕变实验的力学模型与蠕变力学性能表征
Creep model for rock mass considering normal creep of rock joint plane
考虑节理面法向蠕变的节理岩体蠕变模型
Creep Property and Mechanism of AZ31 Magnesium Alloy under High Temperature and Low Stress
高温低应力下AZ31镁合金的蠕变性能及蠕变机理
The Rheological Combination Model Describing Accelerated Creep and the Creep Experiments Research of Rocks and Coal;
可描述加速蠕变的流变力学组合模型和煤岩的蠕变试验研究
Creeping Strain Function of Leather in Lastometer Deformation
顶伸状态下皮革蠕变应变函数的研究
PROCESSING AND PREDICTION OF THE DISPLACEMENT DATA FOR ROCK MASS CREEP--ATTRACTOR ANALYSIS OF SLOPE CREEP
岩体蠕变位移数据的处理和预测——滑坡蠕变吸引子分析
Study on the High-temperature Creep Behavior and the Estimation of Creep Crack Parameter C～* of Cracks in Bi-material CT Specimen;
双材料CT试样裂纹高温蠕变行为的研究与蠕变断裂参量C～*的估算
Study on Triaxial Creep Mechanism and Creep Model of Mica-quartzose Schist at Dam Abutment of Heihe Reservoir
黑河水库坝肩边坡云母石英片岩三轴蠕变机理及蠕变模型研究
STUDY OF CREEP-FATIGUE INTERACTION USING A VISCOPLASTIC MODEL COUPLED WITH A CREEP DAMAGE
耦合蠕变损伤的粘塑性模型用于疲劳-蠕变交互作用的研究
Crystal-plasticity-based creep modelins for Ni-based single crystal superalloy
镍基单晶合金蠕变研究:基于晶体塑性的蠕变建模
testing methods for creep rupture of adhesive bonds
粘合剂蠕变断裂的试验方法
A slow flow of metal when under high temperature or great pressure.
蠕变金属在高温或高压下的缓慢流动
testing method for bending creep of high performance ceramics
工程陶瓷制品弯曲蠕变试验方法