Influence of Original Structure on Equal Channel Angular Pressing Deformation of 304L Extra-Low Carbon Stainless Steel;
原始组织对304L超低碳奥氏体不锈钢等径角挤压变形的影响
The microstructure evolution of as-cast 304L austenitic stainless steel during equal channel angular pressing(ECAP) from 1-4 passes was investigated.
研究了经1~4道次等径角挤压变形(ECAP)后,铸态304L奥氏体不锈钢微观结构的演变,同时测定了ECAP变形后的力学性能。
The microstructure and properties of austenitic stainless steel produced by forging or equal channel angular pressing(ECAP) and followed by recrystallization annealing treatment were investigated.
在试验的基础上研究了经2种塑性变形(锻造、等径角挤压变形)的奥氏体不锈钢完全再结晶后的组织与性能。
The effect of welding temperature on equivalent plastic compressive deformation of solid - state welding;
焊接温度对固态焊接中等效压缩变形的影响
Flow stress characteristics of isothermal deformation at high temperature for 7075 aluminum alloy;
7075铝合金高温等温变形的流变应力特征
By isothermal deformation of as-cast Ti-6Al-4V (ZTC4) at different plastic technologic parameter,the regulations of deformation stress-strain and microstructure deformed have been obtained.
采用不同的塑性工艺参数对铸造Ti-6Al-4V(ZTC4)进行等温变形分析,得出变形应力-应变规律和变形后的内部组织规律;对ZTC4钛合金的原始组织进行了分析,得出原始组织形态的影响规律。
An effective method for grain refining of γ-TiAl alloy was put forward based on the study results of compression behavior and microstructure evolution during isothermal deformation.
研究发现,如果γ-TiAl合金锭具有一定的细晶组织便可以在(α2+γ)2相区完成等温变形而不产生裂纹。
The key problem in the numerical simulation is how to transform the given peening parameters into the equivalent nodal forces, which is solved by the equivalent deformation method proposed by the author.
在分析窄条喷丸成形的变形特点基础上 ,提出了通过等效变形实现数值模拟的方法。
Equal energy,equal deformation tamping and expansion gangue pile is a new strengthening method,which not only has the effect of tamping and expansion,but also strengthens complex earth-fill.
等能量、等变形夯扩挤密矸石桩是一种地基加固新技术。
Influence of Process Routes on Strain Homogeneity During Equal Channel Angular Pressing
工艺路线对等径角挤压变形均匀性的影响
Deformation Behavior of Al-Ti-B Master Alloy during ECAP Process
铝-钛-硼中间合金在等径角挤压过程中的变形行为
Deformation behaviors of AZ31 magnesium alloy by equal channel angular extrusion
等通道角挤压变形AZ31镁合金的变形行为
Study on the Materials Flowing and Deformation Behavior by Equal Channel Angular Pressing(ECAP)
等径角挤压过程中材料的流变行为研究
Evolution of precipitates in Al-Cu alloy subjected to equal-channel angular pressing
Al-Cu合金析出相在等径角挤压中的演变
Deformation analysis of equal channel angular extrusion processing with acute channel angle
锐角模具等通道转角挤压过程变形分析
Superplastic Behavior of Mg-Zn-Nd Alloy Subjected to Equal-Channel Angular Pressing;
等通道转角挤压Mg-Zn-Nd合金的超塑性变形行为
Study on plastic deformation behavior of equal channel angular pressing process
等通道转角挤压过程塑性变形行为的研究
Plastic deformation behavior of AZ61 magnesium alloy processed by equal channel angular pressing
等通道转角挤压AZ61镁合金的塑性变形行为
In Situ Formation of Cr Filaments during Equal Channel Angular Pressing of Casting Cu-5.7%Cr Alloy
铸态Cu-5.7%Cr合金在等径角挤压中铬纤维的原位形成
Computer Simulation of Pure Copper during Equal Channel Angular Pressing
纯铜等径角挤压过程计算机模拟研究
Softening resistance of CuCrZr alloy fabricated by equal channel angular pressing
等径角挤压制备CuCrZr合金的抗软化性能
Finite element analysis of equal channel angular pressing of 6062 Al alloy
6062铝合金等径角挤压有限元模拟
Finite Element Simulation of Ti-6Al-4V Alloy during Equal Channel Angular Extrusion
Ti-6Al-4V合金等径转角挤压有限元分析
Design of the principles in the hydraulic system of internal high-pressure forming and equal channel angular processing equipment
内高压和等径角挤压设备液压系统原理设计
The Study on Preparation of Al_2O_(3sf)/AZ91D Composite and Equal Channel Angular Pressing Shear Deformation;
Al_2O_（3sf）/AZ91D复合材料制备及其等径角挤剪切变形研究
Numerical Simulation and Experimental Investigation of Deformation Mechanism in Equal Channel Angular Pressing/Extrusion Process;
等通道弯角挤压（ECAP）变形机理数值模拟与实验研究
Study on the Microstructure and Mechanical Properties of Magnesium Alloy by Equal Channel Angular Extrusion;
等通道角挤压变形镁合金微观组织与力学性能研究