Temperature Shock Measuring System for Automobile Ignition Coil;
汽车点火线圈温度冲击测试系统
The environment stress screen of cables outside of satellite has been tested against the temperature shocks of 200 ℃ temperature difference.
为考察航天器外露电缆能否承受低于-140℃的温度,特别是温差近200℃的温度冲击,进行了星用外露电缆线的环境应力筛选(ESS)试验工作。
Combined with test parameter, analyzed the completed approach on the facility of temperature shock test.
结合试验指标要求,对温度冲击试验设备实现途径进行分析比较,选择两箱式作为试验设备的实现方式;对设备组成结构及制冷、加热流程进行阐述,并对温度冲击试验过程中两种制冷状态下的热负荷进行了分析计算。
in the experiment of thermal shock.
本文以高聚物粘结炸药为研究对象,利用声发射技术监测温度冲击和力学性能试验过程中材料内部的损伤演变,研究损伤演变特征、温度冲击损伤对力学性能的影响和高聚物粘结炸药的声发射特性。
In this paper,ways to calculate shock temperature are classified as three kinds of basic methods.
将冲击温度的计算归纳为三种近似方法，并对这三种方法进行了概述，同时还给出了一些材料参数的估算方法。
The method of measuring shock temperature of metals is described.
介绍了金属冲击温度测量的基本方法，对金属冲击温度测量中存在的一些主要问题进行了分析和讨论。
The experimental data of the Hugoniot, shock temperature and rarefaction velocity in HDG window were determined under the shock pressure of 7.
获得了76～160GPa压力范围内重玻璃Hugoniot参数、冲击温度和卸载声速的实验数据,声速测量不确定度小于2%。
A fast pyrometer with wide dynamic linearity for shock temperature measurements
用于冲击波温度测量的宽动态线性光学高温计
Radiometry is one of the most commonly used techniques in shock temperature measurement for metals.
讨论了在利用辐射法测量金属的冲击波温度时，金属基板（ 靶板） 与金属镀膜样品之间的间隙对“金属镀膜样品／ 窗口”界面上的温度的影响及其对冲击波温度测量的意义。
Effects on shock temperature measurements of the gap between the bulk metal sample and the transparent window are specially discussed in detail.
重点讨论了非理想界面对利用辐射法测量金属的冲击波温度的影响 ,建立并给出了“三层介质模型”的热传导方程的普适解析解 ,分别将该解析解应用于块状金属样品的冲击波温度测量、“热阻模型”以及利用对称夹心装置测量蓝宝石单晶的高压热传导问题 ;重点研究和讨论了利用块状样品进行金属材料冲击波温度测量的原理和可能性 ,以及在利用块状样品进行金属材料冲击波温度测量时实验装置设计应该满足的要求。
Shock pressure, internal energy and shock temperature were calculated as function of compression.
冲击压力、内能和冲击温度被计算为压缩度的函数。
Extreme resistance to heat shock, heat shock temperature240℃. The windings can work for a long time at hightemperature ambient condition220℃.
具有极高的耐热冲击性，耐热冲击温度在240℃上。可长期工作于220℃以下的高温环境。
test method for brittleness temperature of plastics and elastomers by impact
塑料及弹性体冲击脆化温度试验方法
Test method for brittleness temperature of plastics by impact
GB/T5470-1985塑料冲击脆化温度试验方法
testing method for brittleness temperature of plastics and vulcanized elastomers by low temperature impact
硫化橡胶和塑料的低温冲击脆化温度试验方法
A fast pyrometer with wide dynamic linearity for shock temperature measurements
用于冲击波温度测量的宽动态线性光学高温计
Problems in Impact Test for Test Temperature and Eligible Parameter of Absorbed Energy
关于冲击试验的试验温度和冲击吸收功合格指标问题
Research on Improving Impact Property at Low Temperature of Hot Rolled High Strength Section Steel
提高热轧高强度型材低温冲击性能的研究
Effect of Sintering Temperature on Performance of Ceramic Target with Al_2O_3 to Impact Mill
烧结温度对冲击磨用Al_2O_3陶瓷靶材性能的影响
EXPERIMENTAL RESEARCH ON IMPACT BEHAVIOR OF CONCRETE-FILLED STEEL TUBE AT ELEVATED TEMPERATURES
不同温度下钢管混凝土冲击力学性能试验研究
Upper incipient lethal temperature of short term thermal shock of two species of copepods
两种桡足类短期热冲击的高起始致死温度值
Analytical Solution of Temperature Field of Solid Rocket Motor Laminated Structure with High-Temperature Thermal Shock
高温热冲击下固体火箭发动机层合结构温度场解析解
Methods for calibration of vibration and shock pick-ups--Testing of transient temperature sensitivity
GB/T13823.15-1995振动与冲击传感器的校准方法瞬变温度灵敏度测试法
Investigation of scaling laws for radiation temperature with shock wave velocity in Al
辐射温度与其驱动Al冲击波速度的定标关系研究
Methods for calibration of vibration and shock pick-ups --Testing of temperature response by comparison
GB/T13823.16-1995振动与冲击传感器的校准方法温度响应比较测试法
Research on Radiation Behaviors and Temperatures of Copper/sapphire Interface under Shock Compression;
无氧铜/蓝宝石界面冲击辐射特性及温度测量研究
THE ROLE OF TEMPERATURE ON IMPACT PROPERTIES OF KEVLAR/FIBERGLASS COMPOSITE LAMINATES
温度对芳纶/玻璃纤维复合材料层压板冲击性能的影响
Influence of Heating Temperature on Morphology of Eutectic Carbide and Impact Fatigue Property of Low Alloy Wear Resistant Cast Iron
加热温度对低合金耐磨铸铁中碳化物形态和冲击疲劳性能的影响