Experimental determination of the test weight and suspension velocity of the rapeseed kernel and husk and research on the rapeseed hull-kernel vibration hierarchical classification were presented for structure design and the choice of operating parameters of the kernel husk separator of rapeseed.
为给油菜籽仁皮分离机的结构设计和操作参数选用提供可靠依据,试验测定了油菜籽仁、皮的容重和悬浮速度,并对油菜籽仁皮混合物的振动分层进行了试验研究,采用数理统计方法建立数学模型,探讨了振动强度对油菜籽仁皮振动分层效果的影响。
Using particle size region(PSR)criterion makes the study of suspension velocity in the slurry more simplified and reliable.
实验采用粒粒范围判据判定颗粒周围的流态，使料浆中颗粒悬浮速度的测量计算变得更简单、准确，由串联釜模型参数与物料在反应器中的返混建立的对应关系，对铝土矿悬浮溶出器设计参数进行了预测。
Based on the analysis of current pneumatic conveyance mode and the influence of pipe length, velocity and ash-air quality ratio on pipe pressure, the conveyance characteristics of pipes were discussed, the cause of pipeline blocking was found out and the selection method for suspension velocity was given, providing guidance for energy-saving and consumption reduction in the design.
通过分析目前气力输送方式及管道长度、流速、灰气质量比对管道压力的影响,阐述管道输送特性,找出堵管原因,并给出悬浮速度的选择方法,为浓相正压气力输送设计中的节能降耗提供指导性结论。
Suspension speed of locusts plays a key role of the improvement of suction trap rate and collection of sedimentation rate.
在内蒙古锡林郭勒盟镶黄旗蝗灾发生区,采集了严重危害草原的4龄期、5龄期及成虫的亚洲小车蝗,分别对它们的活体、死体的悬浮速度进行了测定,为草地蝗虫吸捕机的设计与改进提供了理论依据。
Expounding the important parameters of suspension speed of air blast duster proves that the effect of the air blast duster is influenced by some outside factors, so we should consider the question of ensuring the speed of air blast duster.
对烟草风分参数的确定,可知风分的好坏受众多外界因素的干扰,因此,主要应 考虑确定悬浮速度的问题。
Then trajectory-recognized method which is based on the theory of the minimum velocity and its built-up time is analyzed and the workout process of the opening time table of the brake drag mechanism is described later.
介绍了射程修正引信的工作原理;分析了基于弹道速度最小值及其出现时间的弹道辨识方法,建立阻力机构展开时间表的编制过程;论述了由射程辨识出最小速度值及其出现时间的方法;给出了解算阻力机构展开时间的流程图和阻力机构展开时间数据表精度验证方法。
The influence of average diameter of particles,voidage of bed on suspension velocity of particles was studied.
实验以 11个粒径范围的颗粒群为研究对象 ,在流化床中对颗粒群的悬浮速度进行了测定和研究 ,考察了平均粒径、床层空隙率等因素对颗粒群悬浮速度的影响 ,得出了颗粒群的悬浮速度与颗粒群平均粒径及床层空隙率间的关系曲线 ,为提高粉粒体流化分级的分级效率提供了实验依
In this article suspension velocity of particles in liquid fluidized bed has been measured and studied by using 11 series of particles.
本文在实验中以11个粒径范围的颗粒群为研究对象，在流化床中对颗粒群的悬浮速度进行了测定和研究，考察了平均粒径、床层空隙率等因素对颗粒群悬浮速度的影响，得出了颗粒群的悬浮速度与颗粒群平均粒径及床层空隙率间的关系曲线 为提高粉粒体流化分级的分级效率提供了实验依据。
The Application of Simulation Technology in the Calculation of the Suspension Velocity of Grain;
仿真技术在物料悬浮速度计算中的应用
Study and Design of Grain Suspending Speed Detecting System Based on the Single-chip Control
单片机控制的物料悬浮速度测试系统研究
The relationship of the initial gas and particle velocity ratio and suspended velocity, friction coefficient is analyzed.
分析了初始气固速度比与悬浮速度、壁摩擦损失系数的关系。
Digital Filter Algorithm for Accelerometer Data in Suspension Control System of High Speed Maglev Train
高速磁悬浮列车悬浮控制中加速度信号数字滤波算法研究
Accelerometer feedback control algorithm for maglev system
磁悬浮系统的加速度计反馈控制算法
The Implementation of a Measuring Instrument for Velocity of High Temperature Superconducting Maglev Vehicle;
高温超导磁悬浮车运行速度检测仪的研制
Vibration Characters of Middle Length Span Rigid Beam of High Speed Maglev Transportation;
高速磁悬浮中等跨度三跨刚构桥振动特性研究
Research on Levitation Gap Sensor for High Speed Maglev Train
高速磁浮列车悬浮间隙传感器的研究
prop-suspended height
悬浮状态支撑剂高度
High Precision Speed Digital Control System of BLDCM for CMG
磁悬浮控制力矩陀螺用高速高精度无刷直流电机全数字控制系统
The Settling Velocity Drag Coefficient and Reynolds Number of Sphere and Bob
球形和圆柱—圆锥形悬浮颗粒下沉速度、阻力系数和雷诺尔德数
A Theoretical Analysis of the Fluid Circulation Speed Protecting Particle Sedimentation as the Rheological Parameters of Solid-Liquid Suspensions Determined
易沉降悬浮液流变性测定时循环速度的理论分析
Stiffness in High Temperature Superconducting Maglev System;
高温超导磁悬浮系统的磁悬浮刚度特性分析
The Implementation of a Measuring Instrument for Levitation GAP of High Temperature Superconducting Maglev Vehicle;
高温超导磁悬浮车悬浮高度测量仪的研制
Researches on Turning Characteristic of Tilting Suspension High-speed Maglev Trains
摆式悬架高速磁悬浮列车转向特性研究
The Study on Stability of Levitation and Guidance Active Control in High-speed Maglev Train;
高速磁浮车主动悬浮导向控制稳定性研究
Implemention of Gap Determination Module for High-Speed Maglev Vehicle Based on FPGA;
高速磁浮列车悬浮间隙测量模块的FPGA实现
Study of the Groove Effect of the Sensor for High-Speed Maglev Train;
高速磁浮列车悬浮间隙传感器齿槽效应的研究