The processing map and activation energy map of the alloy were established by using tested data,and mi- crostructure evolution of deformed samples was also examined.
利用实验数据建立了合金的热加工图和热激活能图,对变形过程中组织演化进行了研究。
One reason why the forging of FGH96(Chinese PM Nibased Superalloy) superalloy is often unsatisfactory is the lack of its processing maps.
5的能量耗散图,根据稳定性判据得到非稳定区,将两者叠加,就构成FGH96的热加工图。
Microstructure observations suggested that the processing map could be characterized by four domains:dynamic recrystallization domain at 450—500℃and about 0.
利用动态材料模型构建了热加工图,结合组织观察结果认为,该合金在450—500℃、应变速率约为0。
Hot deformation and processing maps of 2618 aluminum alloy;
2618铝合金的热变形和加工图
The microstructure of deformed specimens was observed and the processing maps were calculated and analyzed.
并观察了变形后的显微组织,计算分析了该合金的加工图。
The processing maps were calculated and analyzed according to the dynamic material model.
根据材料的动力学模型,建立了热加工图,不同真应变下的热加工图相似,随着变形温度的升高及应变速率的降低,能量消耗效率η逐渐升高。
Firstly, the article reviewed rule model, cognitive process model, and computational model; secondly, it commented the hierarchical framework model which had been put forward in 2004; and finally, it summarized the graph and table processing theories and pointed out research directions in the future.
图表加工是指人们对图表所呈现信息的认知加工。
This paper probes into the decisive factors of the outsourcing of book processing,analyzes on the risks faced by the outsourcing of book processing,and advances some control measures for controlling the outsourcing quality of book processing.
探讨了图书加工外包的决定性因素,分析了图书加工外包面临的风险,提出了图书加工外包质量的控制措施。
Improving the quality and efficiency of book-processing from the essential factors of book-processing;
从图书加工的基本要素着手提高加工质量和效率
Connecting with the working practice,this paper points out the problems existing in the course of the book-processing,and puts forward some corresponding improving measures in the light of these problems.
结合工作实践,指出了图书加工过程中存在的问题,并就这些问题提出相应的改进措施。
Hot Deformation Mechanism and Processing Map of TC11 Alloy
TC11钛合金热变形机制及其热加工图
Study on Hot Deformation Characteristics of Molybdenum Based on Processing Map
基于热加工图的钼金属热变形特征研究
The study on the hot extrusion working parameters of inconel 690 based on processing maps
基于热加工图的inconel 690合金挤压工艺参数研究
Hot plastic deformation and processing maps of 14Co-10Ni-Fe alloy
Fe-14Co-10Ni合金的高温塑性变形及热加工图
The Hot Deformation Behavior and Hot Processing Map of Cr-Mn-Ni-Cu-N Austenitic Stainless Steel
Cr-Mn-Ni-Cu-N奥氏体不锈钢热变形行为及热加工图
Workability and Processing Map of SiC Particle Reinforced Aluminum Matrix Composites at High Temperature and Strain Rate
SiC颗粒增强铝基复合材料的热成形性能与热加工图
Study on Hot Deformation Behavior and Proceesing Map of High Temperature Titanium Alloy Ti600;
Ti600高温钛合金的热变形行为及加工图研究
Impressed a design on the hot wax.
在热蜡上加盖设计图案
Hot food should be thoroughly cooked and freshly made.
热食品应完全加热，并应是刚刚加工的。
Research on Hot Deformation Process of 403Nb Heat-resistant Martensitic Stainless Steel
403Nb马氏体耐热不锈钢热加工工艺研究
mains medium frequency induction heating equipment
工中频感应加热设备
Various kinds of water heating includeing bathroom water heating civilian life and process water heating for industrial purposes.
各种水加热，包括民用盥洗室里的水加热及工业上工艺水的加热。
a workplace where metal is worked by heating and hammering.
通过加热和锤打来加工金属的工厂。
Research of Regenerative Systems Variable Condition Character of Coal-fired Power Plant;
火电厂回热加热系统变工况特性研究
Research of the Temperature Field in the Gasifier Utilizing High Temperature Smoke Heat up;
基于高温烟气加热的热解气化炉热工特性研究
Comprehensive Construction Technology of Heating Furnace Foundation Excavation in(1880mm) Hot Rolled Strip of Bao Steel Group
宝钢1880热轧带钢工程加热炉基坑综合施工技术
Multimedia Courseware Image Processing and Graphics Processing Technology
多媒体课件图像处理和图形加工技术
Code for construction and acceptance of heating furnace
加热炉工程施工及验收规范