It is a new method to produce Semi-solid billet.
原位反应近液相线铸造方法是原位反应与近液相线铸造方法相结合在一起,形成的一种制备半固态坯料的新方法,它将颗粒的生成置于合金熔体中完成,利用半固态坯料的合金相图,在近液相线温度浇铸,得到满足触变成形工艺要求的半固态坯料的一种新型制备方法,它的优点在于原位颗粒表面无污染、在基体中均匀分布、近液相线温度浇铸可以抑制形成枝状晶组织而形成细小的蔷薇状组织,且工艺简单、生产效率高,适用合金品种多。
It is studied that the TiC/7075 Al matrix Semi-solid billet was fabricated by in-situ reactive Near-liquidus method.
本文采用原位反应近液相线铸造技术制备TiC/7075Al基半固态坯料。
Preparation of Al_2O_(3p)/Al-Cu Matrix Semi-solid Billet
Al_2O_（3p）/Al-Cu基半固态坯料的制备
Preparation of TiC/7075Al Matrix Semi-solid Billet
TiC/7075Al基半固态坯料的制备
New Technology for Preparing Semi-Solid Billets of LC9 Aluminum Alloy
LC9铝合金半固态坯料制备工艺研究
Superplasticity Research on Semi-solid Blank of 7A09 Aluminium Alloy
7A09铝合金半固态坯料超塑性研究
Numerical Simulation on Reheating Process of Magnesium Alloys Semi-solid Billets
镁合金半固态坯料重熔过程数值模拟
Preparation of Semi-solid AlSi30 Billets by SIMA Method
基于SIMA法的AlSi30合金半固态坯料的制备
Reheated microstructures of semi-solid ingots of TiC_p/7075Al composites
TiC_p/7075Al基复合材料半固态坯料二次加热组织
Preparation of Semi-solid Billet and Reheating of Hypoeutectic Al-Si Alloy;
亚共晶铝硅合金半固态坯料的制备及二次加热
Study on Preparation of AlSi7Mg Alloy Semi-solid Billets by Melt Isothermal Treatment Process;
熔体等温处理法制备AlSi7Mg合金半固态坯料的研究
Study on Semisolid Feedstock of A356 by Controlled Pouring Methods;
控制浇注方法制备A356半固态坯料的研究
Experimental Study on Fabrication of Semisolid Billet of AlSi30 Alloy Based on New SIMA Method
基于新SIMA法的AlSi30合金半固态坯料制备试验研究
Preparation of Mg-Al Series Magnesium Alloy Semi-solid Billets and its Thixo-extrusion Forming
Mg-Al系镁合金半固态坯料制备及触变挤压研究
Effects of Technological Parameters in Strong Cooling with Single-tube on Microstructure of A356 Alloy Semi-solid Billets
单管强冷法制坯工艺对A356合金半固态坯料组织的影响
Study on Compound Fabrication of Semi-solid Billet of Near-eutectic Al-Si AlloyBased on SIMA Method;
基于SIMA法的近共晶点铝硅合金半固态坯料复合制备研究
The FEM Research and Technical Parameters Optimizing of the Process of AlSi9Mg Alloy Semi-solid Billet Production;
AlSi_9Mg合金半固态坯料制备有限元分析及工艺参数优化
Research on the Making of Semi-Solid Billet of AZ91D Magnesium Alloy by Direct Extrusion-ECAP;
正挤压—等径道弯曲制备AZ91D镁合金半固态坯料研究
Research on Semi-Solid Billet of 6061 Aluminium Alloy by Sima and Its Thixo-Forming;
变诱导法铝合金（6061）半固态坯料制备及触变成型研究
Numerical Simulation and Parameters Optimization of Reheating Process of Magnesium Alloys Semi-solid Billets
镁合金半固态坯料重熔过程数值模拟及参数优化