Computer simulation and experimental investigation on casting grain size for uranium-niobium alloy;
铀铌合金铸造晶粒度的计算机模拟与实验研究
The results show that preheating and annealing can shorten the incubation period for the reactions of bulk uranium and uranium-niobium alloys with H_2.
用压力 体积 温度(P V T)法研究了铀和铀铌合金与氢气反应的动力学过程。
The surface reaction of uranium-niobium alloy with carbon monoxide has been studied by x-ray photoelectron spectroscopy(XPS) and gas chromatography(GC).
采用X射线光电子能谱 (XPS)和气相色谱 (GC)研究了铀铌合金在 2 5℃与CO反应后表面层的组成和反应气氛的变化 。
Electrochemical studies are performed to investigate the corrosion resistance of uranium niobium alloy before and after passivated with carbon monoxide.
采用电化学方法研究了铀铌合金经CO( 0 3MPa)钝化前后的电化学耐蚀性能 ,并用X射线光电子能谱 (XPS)分析了铀铌合金经CO钝化后表面层的组成。
The atmospheric corrosion characteristic of depleted uranium alloys in environments of indoor and outdoors of marine and inland environment was studied.
通过对贫铀合金在沿海、内地的户外暴露试验和库内露置试验,研究并得到了贫铀合金的大气腐蚀特性,分析了大气中SO2、Cl-及相对湿度腐蚀贫铀合金的原因与结果。
75Ti uranium alloy that chronically exposed and stored in the typical atmosphere is summarized in this paper.
概述了U - 0 75Ti铀合金在典型大气环境中长期曝露和贮存时的腐蚀行为及应力腐蚀敏感性研究的一些主要结果 ,得到了铀合金在长期贮存条件下 ,能够长期保持极低的腐蚀速率和不存在明显的大气应力腐蚀的重要规律 。
Research on the Alloy Corrosion Behavior in Uranyl Solution and Oxide Characteristics of Uranium-Niobium Alloy;
铀酰溶液中合金腐蚀行为和铀铌合金氧化特性研究
Effect of Cold-Spinning and Heat Treatment on the Microstructure of Sub-Eutectoid U-Nb Alloys
冷旋压-热处理对亚共析铀铌合金显微组织的影响
Study on Laser Surface Alloying with Niobium on Uranium and Corrosion Resistance of Processing Layer;
铀表面镀铌激光合金化及其抗腐蚀性研究
nitrided niobium-titanium-tungsten alloy
氧化铌--钛--钨合金
Study on the Uranium Modified Surface Layer Obtained by Ion Implanted with Niobium at High Temperature;
金属铀表面高温注入铌离子的改性层研究
OXIDATION OF NIOBIUM AND NIOBIUM ALLOYS AT HIGH TEMPERATURE IN VACUUM
铌和铌合金在真空高温下的氧化现象
The Study on the High-temperature Oxidation-resistant Coating on Niobium and Nb-base Alloy
铌及铌合金高温抗氧化防护涂层研究
Traditionally the sealed hat of niobium alloy using in the high pressure natrium lamp adopt the tube of niobium-zirconium alloy to process.
传统的高压钠灯用铌合金封帽采用铌锆合金管加工而成。
Study on Technology of Nb-V Micro-alloyed HRB500 Ribbed Bar
铌钒复合微合金化HRB500钢筋工艺研究
Upper Limit Temperature of Deformation Induced Transformation of Nb Microalloyed Steels
铌微合金钢形变诱导相变的上限温度
Study of Twinning Induced Plasticity with Addition of Nitrogen or Niobium;
氮、铌合金化孪生诱发塑性（TWIP）钢的研究
Development and Production of Niobium,Titanium Microalloying Hot Strip
铌、钛微合金化热轧带钢的开发及生产
Fatigue Behaviour of a 400 MPa Grade Nb Microalloyed Steel
一种400MPa级铌微合金钢的疲劳性能
Molten Salt Synthesis of Rod-like Tungsten Bronze Niobate Particles
熔盐法制备棒状复合碱土金属铌酸盐
Hot Deformability of Cast High Nb Containing TiAl Alloy
铸造高铌TiAl合金的热变形能力研究
Development of Nb-Ti Micro-alloyed Steel for Automobile Frame 510L
铌钛微合金化汽车大梁板510L开发
Fabrication of High Nb Containing TiAl Alloys by High-Energy Ball Milling and Pressureless Sintering
高能球磨与无压烧结制备高铌TiAl合金
Determination of Nb-Al-Ti in Ferrocolumbium by X-ray Fluorescence Spectrometry with Fusion Sample Preparation
熔融制样X射线荧光光谱法测定铌铁合金中的铌铝钛