oil drying

基本解释油干燥

网络释义

1)oil drying,油干燥2)ink setting,油墨干燥3)oil drying,热油干燥4)oil drying method,油干燥法5)Oil-phase drying,油相干燥法6)hot kerosine drying,热煤油干燥

用法和例句

The relationship between the coating structure of the coated paper and the ink setting rate and the effect of the coating structure on the print smoothness and the gloss are introduced.

介绍了颜料涂布纸涂层结构与印刷油墨干燥速率之间的关系及其对印刷平滑性、光泽度的影响。

During the nineteenth century, advances were made in the use of driers to speed the drying of ink.

十九世纪里,在使用干燥剂加速油墨干燥方面取得了进展。

Penetration: One of the ways in which inks dry.part of the ink vehicle penetrates into the paper due to its absorbency.Those left at the paper surface oxidized quickly and dried.

渗透:油墨干燥方法之一。油墨部分的展色剂因纸的吸收性而渗入纸内,余下部分迅速氧化而干燥。

Used for drying of inds in web presses and adhesices in some book-binding lines.

应用于卷筒纸机上,使用权油墨干燥;或应用于一些装订作业上,使胶粘剂干燥。

Oxidation: Chemical action with the oxygen in the air. It is one of the principal ways in which printing ink dries.

氧化:与空气中的氧气起作用的化学作用。是印刷油墨干燥的主要方法之一。

Coldset ink: Ink which dry wholly by penetration are called coldset ink.

冷凝墨:只用渗透方式来干燥的油墨。

Test method for drying time of film formation of printing inks

GB/T14624.4-1993油墨结膜干燥检验方法

Oil-based ink: The vehicle of an ink is mainly consist of mineral oil. This type of ink is used for newspaper printing where inks drying are wholly by penetration. See Water-baded ink.

油基墨:用矿物油作主要展色剂的油墨。报纸印刷多用此类油墨,它以渗透作用干燥。参阅水基墨。

Heat set ink: Letterpress and offset inks which dry under the action of heat by evaporation of their high boiling solvent.

热固油墨:活版及柯式用油墨。热力使它的高温沸腾溶剂蒸发而干燥。

Moisture-set ink: Printing ink that uses precipitation as its drying method. Mainly used in food carton printing.

水凝固墨:用沉淀法干燥的印刷油墨。主要用作食品纸箱印刷。

quick-setting ink

快干油墨, 快固着油墨

Dry back: The loss of density or colour strength of an ink as it dries.Different ink and paper relation exhibit different degree of dry back.

干后变淡:油墨的色量和密度随着干燥而减弱的情况。不同的纸墨关系,呈现不同程度的干后变淡。

Infra-red curing: A method of accelerating the drying of printing ink by intensive exposure to infra-red radiation.

红外线固化:红外线固化 用强烈的红外线辐射能,照射油墨,使之快速干燥。是加速干燥法之一。

Electron beam curing: A system to provide fast curing of conventional oxidation drying inks.

电子束固化:把惯用的氧化干燥油墨快速固化的系统。

Solvent: The liquid in which a solute is dissolved. Solvens such as alcohol., are used as vehicle for evaporation drying inks.

溶剂:把溶质溶解的液体。例如:醇类的溶剂,就有作挥发干燥油墨的展色剂。

Process speed to dry ink is improved with the combination of an IR lamp(near infrared)and a hot air blower (far infrared).

由于采取ir(近红外线)和热风(远红外线)相结合的有力措施,提高油墨的干燥速度。

Chill rolls: Cooling rollers located after a drying oven, to cool the heated ink film causing it to set.

冷却辘:安装在干燥炉之后的一些降温辘,它使受热后的油墨冷却而凝固。

A coupled model of penetration and evaporation for ink film drying on plain paper

纸张表面墨膜蒸发与渗透干燥的耦合建模

(of ink,paint,plaster,etc)recently applied and not yet dry or set

(指墨水、油墨、油漆、灰泥等)尚未干的,尚未凝固的

最新行业英语

行业英语