Research on NC machining 3D simulation of spiral bevel and hypoid gears;
螺旋锥齿轮数控加工3维仿真研究
Because the value of Ra is affected by a lot of facts and some of them are undefined,the surface roughness forecasting of spiral bevel and hypoid gears is a typical gray system.
影响螺旋锥齿轮磨削加工表面粗糙度Ra值的因素众多且很多不明确,该Ra值的预测属典型的灰色问题。
Due to the technology secret, there is no information aboutmeasuring the two parameters of spiral bevel and hypoid gears on line tobe vended, and the exceptional complicated teeth profile of the gearsmakes it difficult to measure the two physics parameters on line.
由于国外技术保密，目前尚无有关螺旋锥齿轮磨削力和表面粗糙度在线测量的资料公开发表，螺旋锥齿轮异常复杂的齿廓形状又给这两个物理量的实际在线测量带来困难。
Research on Simulation System of Duplex Spread Blade Multi-axis Machining for Spiral Bevel Gears;
螺旋锥齿轮双重双面法多轴联动数控加工计算机仿真研究
The normal arc spiral bevel gears is a new type of transmission pair.
法向圆弧螺旋锥齿轮传动是一种新的锥齿轮传动形式。
For deficiency of the Gleason design technique for the spiral bevel gears,in which the meshing function is unable to be predesigned in whole tooth contact,a theory for the meshing characteristic-oriented design of point-contact tooth surface was presented.
针对格里森螺旋锥齿轮齿面设计方法无法在整个齿面接触传动过程中有效控制齿面啮合特性的不足,论述一种按预定的啮合特性设计点啮合齿面的理论和方法:啮合齿面的接触迹线上每一点的几何结构按预定的齿面啮合特性要求设计,而与特定的机床结构参数无关。
Surface error measurement of spiral bevel gears using scanning measurement;
螺旋锥齿轮齿面扫描式测量法及其应用研究(英文)
Study on and Design of Pneumatic System for NC Spiral Bevel Gear Burnishing Machine;
气动在数控螺旋锥齿轮研齿机中的应用研究
Study on Machining Simulation System of CNC Spiral Bevel Gear Grinding Machine;
数控螺旋锥齿轮磨齿机加工仿真系统的研究
Analysis of interpolation error of NC machining for bevel gear space curved face;
螺旋锥齿轮空间曲面NC加工插补误差分析
After establishing the model of solving the contacting points of two bevel gear tooth surfaces expressed by B SPLINE function, the author changes the model to an boundary limited optimization and uses “BOX” method to solve the problem.
建立了由样条函数表示的螺旋锥齿轮副齿面接触点的求解模型———带区间的五元三次非线性方程组 。
According to NC grinding principle and the tooth mathematical models of bevel gear,the forming principle and influencing factors of generating surface roughness of bevel gear are analyzed by the single blade method which used for the cup-shaped grinding wheel.
根据螺旋锥齿轮的数控磨削原理和齿面数学模型,分析了单面法用直口杯砂轮展成螺旋锥齿轮时表面粗糙度的形成机理与影响因素。
Nonlinear vibration characteristics of helical bevel gear system and parameters influences
螺旋锥齿轮非线性振动特性及参数影响
According to helical bevel gears set contacting property and HERTZ theory,load boundary conditions of helical bevel gears are defined.
根据螺旋锥齿轮副的接触特性及赫兹理论 ,确定出螺旋锥齿轮轮齿的载荷边界条件 ,建立了当量螺旋锥齿轮轮齿的三维有限元计算模型 ,并进行了弯曲强度分析。
A 7 degrees of freedom dynamic equation of helical bevel gear system with clearance was developed.
建立了含间隙的7自由度螺旋锥齿轮动力学方程,结合分岔图和最大Lyapunov指数曲线研究了分岔的演化过程及系统参数对系统分岔和混沌行为的影响。
Rattling response of vibration lapping of spiral bevel gear
螺旋锥齿轮振动研齿系统的拍击响应
Machining Simulation of Phoenix Ⅱ CNC Spiral Bevel Gear Cutting Machine
Phoenix Ⅱ数控螺旋锥齿轮铣齿机加工仿真
Research on the Method of Addendum Lines Chamfering for Driven Gear in Spiral Bevel Gear Pair;
螺旋锥齿轮副大轮齿顶线倒角加工方法的研究
spiral bevel milling cutter head sharpening machine
螺旋锥齿轮铣刀盘刃磨床
The Contact Region Anasyis of the Kilngelnberg Spiral Bevel Gear;
克林根贝格螺旋锥齿轮接触区域分析
A Simulating Analysis for Spiral Bevel Gear Meshing in Aerostat Reducer;
航空减速器螺旋锥齿轮啮合仿真分析
Research on the Error Correcting Technology and Application of Spiral Bevel and Hypoid Gears
螺旋锥齿轮加工误差分析与应用研究
Difference Surface Model Establishment and Simulation in Spiral Bevel Gear
螺旋锥齿轮差曲面模型的建立与仿真
Numerical Control Spiral Awl Gear Wheel Grind Tooth Machine Pneumatic System Study and Design
数控螺旋锥齿轮研齿机气动系统研究与设计
Study on Klingelnberg Bevel Gear Interference with the Cutter and Machining Calculating;
螺旋锥齿轮切齿计算及干涉情况的研究
The Research on Evaluation Method of Tooth Surface Topographic Deviation for Spiral Bevel Gear;
螺旋锥齿轮齿面拓扑误差评定方法的研究
Use the Equidistant Alternating Theory to Calculate the Approximate Equation of Gear Tooth Profile about Spiral Bevel Gear;
计算螺旋锥齿轮近似齿廓方程等距变换法
Research on Machining Simulation System of Phoenix Ⅱ CNC Spiral Bevel Gear Grinding Machine
Phoenix Ⅱ螺旋锥齿轮磨齿机加工仿真系统的研究
Effect of Machine Tool Errors on the Tooth Form of Spiral Bevel Gears
机床误差对螺旋锥齿轮齿形的影响规律
Compensation of Machining Errors of CNC Spiral Bevel Gear Grinding Machine
数控螺旋锥齿轮磨齿机机床加工误差补偿
Research on improved tooth contact analysis algorithm of spiral bevel gears
螺旋锥齿轮齿面接触分析改进算法研究
Research on the Influence of Adjustment Errors of Machine on Tooth Surfaces of Spiral Bevel Gear
机床调整误差对螺旋锥齿轮齿面影响的研究
Study on Electrochemical Finishing Process for Spiral Bevel Gear;
螺旋锥齿轮电化学光整加工技术基础研究