By improving process technique of screw insert part and application of elastic contact structure,plastic forward in the screw insert and ungrammatical problem of screw insert were successfully resolved.
通过对螺纹嵌件的工艺分析,针对模具设计中存在的问题,提出了反向推理的解决方法,并有针对性地设计出了弹性接触的模具结构。
This work attempts to find a new homogenization method for the analysis of assemblage of elastic contact bodies.
研究工作目的是建立弹性接触颗粒状组成周期性结构材料力学分析的均匀化模型。
Based on the work presented in paper , a new homogenisation method for the analysis of assemblage of elastic contact bodies is proposed in this paper.
基于文献 [1]的工作 ,给出弹性接触颗粒状组成周期性结构材料宏观力学均匀化分析新方法。
Based on the theory of solid fatigue wear and the conclusion of contact mechanics relating to collision, the method of determining erosion fatigue parameter in plastic contact condition is designed.
根据固体疲劳磨损理论并结合接触力学的有关分析结论,设计了一套确定塑性接触状态下材料表面粒子冲蚀疲劳特性参数的方法,同时依此方法确定碳钢材料的粒子冲蚀应变值,应变指数。
Suppressive effect of glycyrrhizin on murine contact hypersensitivity;
甘草甜素抑制小鼠接触性超敏反应的实验研究
A comparative study of the effects of mizolastine,loratadine and cetirizine on cytokine expression in murine allergic contact dermatitis;
新一代抗组胺药对变应性接触性皮炎小鼠3种细胞因子影响的比较研究
Effects of recombinant human interleukin-11 on contact dermatitis of mice induced by dinitrofluorobenzene and on level of inflammatory cytokines;
重组人白细胞介素-11对2,4-二硝基氟苯致小鼠接触性皮炎和炎症细胞因子水平的影响
The result reveals that the geometrical size has no obvious effect on the contact characteristics,while the geometric nonlinearity is contributed by the rigidity and tensile strength of the contact solids.
理论分析结果表明,轴承组件的几何尺寸不影响接触特性,但其几何非线性依赖于材料的抗拉强度及硬度。
The p-μc-SiC:H/p-a-SiC: H structure as window layer of solar cells improved obviously the contact characteristics of SnO2/P.
利用ｐ－μＣ－ＳｉＣ：Ｈ／ｐ－ａ－Ｓｉ：Ｈ复合结构做ａ－Ｓｉ太阳电池的窗口材料，明显改善了ＳｎＯ２／ｐ之间的接触特性，从而使１０ｃｍ×１０ｃｍ单结集成型电池的填充因子从０。
The results of the calculated example indicate that the contact characteristic parameters are very coincident under the same work condition.
实例计算结果表明,在轴承工况相同的条件下,两种分析方法得到的接触特性参数的一致性较好,但各有特点。
Research on structure and contact characteristic of Kalsi hydrodynamic seal;
Kalsi型流体动压密封结构及其接触性质研究
The Hybrid-Trefftz Finite Element Method for Elastic Contact Problems;
弹性接触问题的杂交Trefftz有限元解法
Calculation of actual contact angle during elastic contact deformation between recirculating ball screw and nuts
滚珠丝杠副产生弹性接触变形时实际接触角的计算
The Complementarity Method for Elastic Contact Problems of Heavy-load Manipulator
巨型重载操作机弹性接触问题的线性互补方法
A NEW METHOD FOR FRICTIONAL ELASTIC CONTACT PROBLEMS BY BEM
有摩擦弹性接触问题边界元分析的一种新方法
AN IMPROVED CALCULATING METHOD FOR BEM? SOLVING 2D ELASTIC CONTACT PROBLEMS
用边界元求解二维弹性接触问题的改进方法
Variational Inequalities for the Plane Elastic Contact Problems and Its Numerical Solution;
平面弹性接触问题的变分不等式及其数值解
The Boundary Element Method for Three Dimensional Elastic Contact Problem with Friction;
用边界元法求解三维摩擦型弹性接触问题
Research Problem about Impact Contact between Euler Plate and Linear Elastic Rod;
Euler板与线弹性杆冲击接触问题研究
Research on an adaptive meshless thermo-elasto-plastic contact model
自适应无网格热弹塑性接触模型研究
Reliability analysis of extension spring based on contact theory
基于接触理论的拉伸弹簧可靠性分析
Numerical Analysis of Starved Elastohydrodynamic Lubrication for Elliptic Contacts
椭圆接触乏油弹性流体润滑数值分析
Elastoplastic Contact Analysis of Metal O-ring Based on ANSYS
基于ANSYS的金属O形环弹塑性接触分析
Stability, Elastic Properties, and Contact Problems of Carbon Nanotubes;
碳纳米管稳定性、弹性性质及接触问题的研究
On existence and uniqueness of the solution of elastoplastic contact problems
一类弹塑性接触问题解的存在惟一性(英文)
Research on the Theory Methods for the Fast Algorithm in the Boundary Element Method for the Elasticity and Elasto-Plas Ticity Contact with Friction
弹性及弹塑性摩擦接触边界元快速算法的理论与方法研究
Design of elastic bearing mechanism in step height contact measuring instrument
接触式台阶测量仪弹性支承机构的仿真设计
Impact Force Calculative Investigation of Contact Impact Between Elastic Bar and Structure
弹性杆与结构接触冲击的冲击力计算研究
Boundary Element Method for Moving and Rolling Contact of 2D Elastic Bodies with Defects;
二维含缺陷弹性体移动和滚动接触的边界元法