The analysis of flow corrosion exhibits that flow velocity,flow state,angle of attack as well as properties of solid particles in solid- liquid flow are the main factors for flow corrosion.
流动腐蚀是引起腐蚀破坏的重要原因。
Finally the flow-induced corrosion rate of metal electrode was increased by the synergism effect.
随着流速增大,电极表面受到的切应力增大,反应阻抗减小,电化学腐蚀加速,协同效应增强,结果使电极流动腐蚀速度增加。
The complexity of flow-induced corrosion was described and all kinds of corrosion pattens in flowing media were classified.
阐述了流动腐蚀的复杂性与分类 。
5% NaCl solution is set up on the basis of determining main controlling factors and their degree of influence in flow-induced corrosion by some electrochemical experiment.
针对管流体系 ,根据动量、能量和质量守恒原理 ,应用壁函数、k -ε湍流运动模型确立了管流体系中的计算流体力学模型和质量传递模型 ;结合腐蚀实验确定双相不锈钢流动腐蚀过程中的主要控制因素及其影响程度 ,分析了动力学过程 ,建立了双相不锈钢在 3。
Effect of cathodal polarization on fretting corrosion behaviors in slip regime;
阴极极化对滑移区微动腐蚀行为的影响
Dual-motion fretting corrosion behavior of pure titanium in Hank’s and saline solutions;
Hank’s溶液和生理盐水中纯钛的复合微动腐蚀特性
The fretting corrosion tests on a plane-on-ball contact of Ti6Al4V/Si_3N_4 were examined on a hydraulic fretting tester with high precision.
采用液压高精度微动试验机,做了Ti6A l4V/Si3N4摩擦副在干态、蒸馏水和Saline溶液等3种介质中的微动腐蚀试验,用激光共焦扫描显微镜(LCSM)观察了磨痕表面形貌并测量了磨损体积。
The effects of surface treatment such as ion plating, ion implantation, laser surface treatment, shot peening, coating and nitriding on prevention of fretting corrosion are described in detail.
详述了离子镀、子注入、光表面处理、丸、盖层和氮化等对材料抗摩振腐蚀的作用。
Study on the Corrosion Behaviors of Friction Stir Welded Joints of Al Alloys;
铝合金搅拌摩擦焊接头腐蚀行为研究
Study on Tribological Properties of CrNiMo Steel in H_2SO_3 Solution
CrNiMo钢腐蚀环境中的摩擦学性能研究
The Research on Friction Stir Welding Process of Magnesium Alloy and Corrosion Protection of the Weld
镁合金搅拌摩擦焊工艺及焊缝腐蚀防护研究
Studies on Corrosion Resisting Property of Friction Stir Welded Joint of Ultrafine-grain Aluminium Alloy
超细晶铝合金搅拌摩擦焊接接头腐蚀性能研究
Corrosion Behavior of Friction Stir Welded Joint of High Strength Aluminium Alloys
高强铝合金搅拌摩擦焊接接头腐蚀行为研究
Resarch Progress of Stress Corrosion Behavior of Aluminum Alloys Friction Stir Welds
铝合金搅拌摩擦焊接接头应力腐蚀研究进展
Research on Electrochemical Corrosion Properties of FSW Joints of H65 Brass Alloy
H65铜合金搅拌摩擦焊接头电化学腐蚀性能研究
Electrochemical Corrosion Behavior of Friction Stir Welding Dissimilar Weld of 5083 and 6082 Aluminum Alloy
铝合金5083-6082搅拌摩擦焊焊缝的电化学腐蚀行为
Study on Corrosion Damage Identification of Pipeline Based on Vibration Modal Analysis;
基于振动模态分析管道腐蚀损伤检测方法研究
Study on the High-temperature and Anti-seawater-corrosion Solid Self-lubricating Anti-frictional Nickel Base Materials;
镍基高温及耐海水腐蚀固体自润滑减摩材料的研究
The Influence of Metal Oxides and Polystyrene Nanopaticles to Oil in Friction and Anticorrosion;
金属氧化物与聚合物纳米材料对油品摩擦及抗腐蚀性能的影响
Microstructure and Corrosion Resistance of Friction Stir Welded Aluminum Alloy Treated by Microarc Oxidation
铝合金搅拌摩擦焊缝微弧氧化后的组织结构与腐蚀性能
Frictional Wear Resistance and Corrosion Resistance of Ag/Ti-6Al-4V Alloy System Treated by Plasma Immersion Ion Implantation Technique (PIII)
TC4合金表面全方位离子注入Ag的耐摩擦磨损和抗腐蚀性能
CORROSION BEHAVIOR OF FRICTION STIR WELDED JOINT OF 7075 ALUMINUM ALLOY BY ACID SALT SPRAY
酸性盐雾中7075铝合金搅拌摩擦焊接头的腐蚀行为
Tribological Behavior of Fibers-reinforced PTFE Composites in Acid Solution
腐蚀环境中纤维增强聚四氟乙烯复合材料的摩擦磨损性能研究
thermal etching
热腐蚀;热浸蚀;热力学侵蚀;热蚀;热蚀法
corrosion allowance
腐蚀余度;腐蚀余量;腐蚀裕度;允许腐蚀度;允许磨蚀度