Finite element analysis on front end bending during heavy plate rolling;
厚板轧制头部弯曲的有限元分析
In the process of heavy plate rolling,mastering the rule of material's width elongation and improving the forecasting precision of width elongation are the key point to ensure that the final plate width can meet customers' requirements.
在厚板轧制过程中,把握材料的宽展规律,提高宽展预测精度是保证最终钢板宽度满足要求的关键环节。
Analysis of strip rolling using three-dimensional coupled finite element method;
板带轧制过程的三维耦合有限元分析
A computer model for simulation of the three-dimensional strip rolling process has been developed by using an interactive procedure to analyze the coupled deformation between strip and rolls.
考虑轧件和辊系间的接触力与变形协调关系 ,采用一种选代的方案 ,开发了一个分析三维板带轧制过程的计算机模型。
A 3-dimensional strip rolling analysis model considering strip lateral flow is developed in order order to overcome the disadvantages in the traditional theories.
针对传统理论的不足,并考虑到板带的横向流动,建立了板带轧制的三维解析模型。
Heat treatment of Mg-Zn-Y-Zr alloy rolling sheet
Mg-Zn-Y-Zr合金轧制板材的热处理
The results show that the grains in the single direction rolling sheet is changed from strip to equal axis shape because of the recrystallization and twin crystals disappearance during annealing heat treatment,and there are some fine grains although part grains are grown.
研究不同退火工艺下AZ31镁合金轧制板材显微组织以及冲压性能。
Research on the Strip Element Method of Three Thermo-Mechanical Coupling of Plate and Strip Rolling and Development of the Simulation System;
板带轧制三维热力耦合条元法研究及仿真系统开发
A new method, called the strip layer method (SLM) for simulating the three-dimensional deformations of plate and strip rolling process, is presented.
提出一种模拟板带轧制过程三维变形的新的数值方法——条层法。
In shape theory, the three-dimensional deformation theory of plate and strip rolling is an important and difficult study content.
板形和板凸度是板带轧制的重要质量指标，板形控制是板带轧机的关键技术。
Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling
恒刚度轧制改善R0粗轧机的轧制板形
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
薄板坯连铸连轧（CSP）轧制区组织模拟
Finite Element Simulation on the Rolling Force During Hot Rolling of Steel Plate
钢板热轧过程中轧制力的有限元模拟
Mathematical Model for the Cold Rolling Force of Titanium Plate
纯钛板材冷轧的轧制力数学模型研究
Technology Study of Rolling Thin Gauge Plate by Wide and Heavy Plate Mill
宽厚板轧机轧制薄规格钢板的工艺研究
A sheet of hammered, rolled, or cast metal.
金属板锻造、轧制，或铸造而成的金属板
Study on Control of Flatness and Surface Roughness on Cold Strip Rolling Mill;
冷轧薄板板形与表面粗糙度控制研究
Robust control for a combined shape and gauge multivariable system in hot strip rolling
热连轧板形板厚多变量系统鲁棒控制
Research and Application on Production Planning of Free Hot Rolling Mode for Heavy Plate in Steel Industry;
热轧中厚板自由轧制计划编制的研究与应用
Investigation on Magnesium Alloy Sheet Manufactured by Strip Casting and Downstream Rolling;
铸轧—二次轧制法制备镁合金薄板的研究
Study on Head Warping and Control for Plate Rolling
中厚板轧制轧件头部弯曲及其控制的研究
Shape Controlling of Sheared Strip Head after Bright Roll in Cold Tandem Mill
冷连轧机光辊轧制剪切后头部板形控制
Fast Calculation of Rolling Force Using Rigid Plastic Finite Element Method in Strip Rolling Process
板材轧制过程轧制力刚塑性有限元快速计算
Profile and flatness control technology for schedule-free rolling in hot wide strip mills
宽带钢热连轧机自由规程轧制的板形控制技术
DETERMINATION OF THE LENGTH OF THE CONTACT ARC IN COLD ROLLING AND CALCULATION OF THE ROLLING FORCE
冷轧板材接触弧长度的确定及轧制力计算
Three-Dimensional Strip Element Method and Its Simulation of Hot Plate and Strip Rolling Process;
三维条元法及其对热轧板带轧制过程的仿真
Study on Pass Schedule and Mill Typesselection for New Plate and Strip Mill in Baosteel;
宝钢新建板带轧机轧制规程及机型选择的研究
The Downstream Rolling Process of Twin Roll Casting Magnesium Alloy Sheet AZ31B;
双辊铸轧AZ31B镁合金板坯的二次轧制工艺