Developments of environment-friendly plasticizers of poly(vinyl chloride);
聚氯乙烯环保型增塑剂的研究进展
The simultaneous determination of many kinds of adipate plasticizers in PVC packaging films;
PVC包装膜中多种己二酸酯类增塑剂的同时测定
Application of plasticizer FS-200 in tread of TBR tire;
增塑剂FS-200在载重子午线轮胎胎面胶中的应用
Effects of plasticizers on physical properties of chitosan/glutin composite films;
增塑剂对壳聚糖—明胶复合膜物理性能的影响
Studies on migration of phthalate plasticizers in PVC plastics in human body fluid;
PVC塑料中邻苯二甲酸酯类增塑剂在体液中的迁移行为研究
Determination of plasticizers in water by headspace solid-phase microextraction coupled with gas chromatogrphy;
顶空固相微萃取气相色谱法测定水中多种增塑剂
Research on reducing the migration rate of the plasticizing agent in architectural membrane materials
降低建筑膜材增塑剂迁移率的研究
And the varieties,the development situation and technology progress on new kinds of rubber auxiliaries are introduced in detail,including vulcanized agent,anti-scorching agent,anti-aging agent,coupling agent and plasticizing agent etc.
简述了国内外橡胶助剂的生产现状,详细介绍橡胶助剂的品种和新品种的开发现状和技术进展,包括硫化剂、防焦剂、防老剂、偶联剂和增塑剂等。
The PES resin is demestic with some kinds of plasticizing agents added.
采用国产聚醚砜(PES)树脂为原料,添加不同的增塑剂,在不同的实验条件下进行熔融法纺丝实验,并对其热性能、流变性、可纺性及纤维的力学性能进行了研究。
The plasticiser ZS-301 is synthesized with the raw material of the palm oil.
以棕榈油为原料合成增塑剂ZS-301,对棕榈油品质(以熔点计),氢氧化钠用量,氯化锌用量通过正交试验进行了确定。
The article is to build a new method for analysis and extract of plasticisers in pvc.
本文报道了聚氯乙烯 ( PVC)塑料中邻苯二甲酸二辛酯 ( DOP)增塑剂的提取和分析方法 :用四氢味喃作溶剂 ,甲醇作沉淀剂 ,采用溶解—沉淀法可以有效地提取 PVC中的DOP增塑剂。
The plasticiser ZS-301 is synthesized with the raw material of the palm oil.
以棕榈油为原料合成增塑剂ZS-301,对棕榈油品质(以熔点计),氢氧化钠用量,氯化锌用量通过正交试验进行了确定。
Effect of plastifiers on properties of siloxane end-capped polyurethane sealant;
增塑剂对硅烷化聚氨酯密封胶性能的影响
Selection of matrix resin,plastifier,additive with high electric property and stabilizer-lubricant system,and their influences on plastic property are discussed.
在对基体树脂、增塑剂、高电性助剂、稳定 /润滑体系的选用及其对塑料性能的影响进行了探讨之后 ,确定了该绝缘塑料的配方 (质量份 ) :PVC(SG2或SG3) 10 0、增塑剂 4 0～ 50、稳定 /润滑体系 4～ 6、高电性助剂 5～ 10。
Talking about the Features and Properties of the Plastic Additives--Plasticizers
浅谈塑料助剂——增塑剂的特点与性质
phenyl polycarboxylic ester plasticizer
苯多羧酸酯类增塑剂
phthalic ester plasticizer
邻苯二甲酸酯类增塑剂
hexachloroendo methylene tetrahydrophthalic aicd
氯菌酸（阻燃剂，增塑剂，防霉剂）
Aqueous Polyester Plasticizer Dedicated for Sizing and Binding Agents
浸润剂、粘结剂专用水溶性聚酯增塑剂
Fillers include modifiers, extenders, plasticizer and low friction additives.
填料包括改性剂，填充剂，增塑剂和低摩擦添加剂。
Study of Developing the Plasticize DOP by Organic Tin
用有机锡催化剂制取 DOP 增塑剂的研究
Symbols of plastics and resins--Part 3: Plasticizers
GB/T1844.3-1995塑料及树脂缩写代号第三部分:增塑剂
A good quality plasticizer will remain in the plastic indefinitely.
性质优良的增塑剂能无限期地留在塑料内。
Simultaneous and non-destructive determination of four kinds of plasticizers in PVC;
聚氯乙烯塑料中四类增塑剂的同时无损测定
Determination of Plasticizers in Plastics by Microwave Extraction and Gas Chromatography-Mass Spectrometry
微波萃取气相色谱-质谱法测定塑料中的增塑剂
fatty diacid ester plasticizer
脂肪族二元酸酯类增塑剂
D.O.P. (dioctyl phthalate)
邻苯二[甲]酸二辛酯（增塑剂）
Determination of water content of plasticizers by turbidimetry
GB/T1659-1982增塑剂水分的测定(比浊法)
Determinating the iodine value of plasticizers
GB/T1676-1981增塑剂碘值的测定
Plasticizers--Test method of heat-resistance
GB/T1670-1988增塑剂热稳定性试验
Plasticizers--Determination of colour
GB/T1664-1995增塑剂外观色度的测定
Determinating the crystalization point of plasticizer
GB/T1662-1981增塑剂结晶点的测定