A research on the numerical relations between the load capacity and making precision of spline on the ends of torsion bar spring;
扭杆弹簧端部花键承载能力与加工精度间数值关系的研究
The Research on Deformation Pattern of Torsion Bar Springs;
扭杆弹簧材料变形规律的改进研究
Design and manufacture of vehicle torsion bar spring;
汽车扭杆弹簧的设计与制造
The miniature torsion spring is vital to space instruments,so its performance testing should be of high accuracy.
微型扭转弹簧性能对航天装置起着至关重要的作用,其测试装置也应达到高精度性能测量指标的要求,分析了微型扭转弹簧装夹加载中的一些难点,从而设计了一种用于精密测试微型弹簧扭矩的装夹加载机构。
This paper will focus on the designation of performance testing device for automobile seat torsion spring system,while overcoming the difficulties on positing clamp and installing torque sensor in the testing.
针对以往扭转弹簧性能检测中的难点,比如定位装夹、需安装扭矩传感器等多方面的困难,设计出了一套用于汽车座椅扭转弹簧性能的检测装置,系统无需安装扭矩等传感器,利用高性能变频器、电机、PLC和计算机,并结合高效定位算法程序,在实际应用中,取得了较好的测试效果。
The crack is represented as a rotational spring,and the method involves obtaining plots of its .
本文利用扭曲弹簧模型 ,对裂缝悬臂梁前三阶固有频率的变化与裂缝位置和深度的关系进行了计算和分析 ,并且利用特征方程以及前三阶固有频率 ,通过作图法对裂缝参数进行识别。
0mm torsional springs which were made from diameter 0.
0 mm扭转弹簧,在装配时发生断裂。
The method of add-on torsional spring is used in this paper to optimize the dynamical property of air-jet loom,and the good effect is achieved.
本文采用附加扭转弹簧的方法对国内某一型号的喷气织机四连杆打纬机构进行动平衡优化,取得了良好的效果。
OPTIMUM DESIGN OF AUTOMOTIVE SUSPENSION AND TORSION BAR SPRING
汽车扭杆悬架及扭杆弹簧的优化设计
The torsion-bar spring is rather complicated so we'll not discuss it here.
扭杆弹簧相当复杂,就不在此说明了。
The Performance Analysis of the Antiroli Torsion Bar Spring Installed in High Speed Bogie
高速转向架抗侧滚扭杆弹簧性能分析
The Study of Heat Treatment Technics about Auto Torsion Bar Spring Made of 50CrVA;
50CrVA钢汽车扭杆弹簧热处理工艺研究
Finite Element Analysis and Optimization Design of the Torsion Bar Spring of EPAS
EPAS扭杆弹簧的有限元分析和优化设计
"The automobile uses three Basic types of spring: coil, leaf, and torsion Bar."
汽车使用的三种最基本的弹性元件为螺旋弹簧,钢板弹簧和扭杆弹簧。
The Statistics Analysis for Torsion Bar Spring Failure in Automotive Suspension Systems
车辆悬挂系统扭杆弹簧疲劳寿命的统计分析
Power Spectrum Prediction Method of Fatigue Life of Torsion Bar Spring Used by Lunar Rover
月球车用扭杆弹簧疲劳寿命功率谱预测法
Structure Design and Finite Element Analysis of Double-stage Torsion Bar Spring;
两级扭杆弹簧的结构设计与有限元分析
The Design、Kinematical Analyse and Optimization of the Longitudinal Arm with Tortile Spring Suspension;
纵臂扭杆弹簧悬架的设计、运动学分析及优化
Analytical results indicate that the optimized structure is superior to the original form and this method provides the guidance to the optimum design of torsion bar spring.
分析结果表明,所提出的改进结构优于原结构,其研究结果对扭杆弹簧的优化设计具有指导意义。
The Reliability Design Technique and Application of Air Spring and Antiroll Torsion Bar
空气弹簧及抗侧滚扭杆可靠性设计技术及应用
Torsional springs. Torsional springs that are loose and seem to have lost tension require replacement of the complete friction disk.
扭转弹簧:扭转弹簧松弛,似乎失去弹性,需更换整个摩擦盘。
rack lever spring
齿条杆式擒纵机构弹簧
Shenyang Auto Sping Factory is a large enterprise specialized in auto leaf spring, torsion bar and axle for light duty vehicle.
沈阳汽车弹簧厂是专业生产汽车钢板弹簧、杆弹簧的大型企业。
There are no springs to break or bind.
在此没有可能断裂或扭曲的弹簧。
0 pressures, torques, pull dint, abnormal shape etc. precise spring coil.
0压力、扭力、拉力、异形等精密弹簧。
Developing of a Performance Testing System of Automobile Seat Torsion Spring
汽车座椅扭转弹簧性能检测系统开发