Comparing many types of transmission,this paper chooses the multiple-level planetary gear transmission to meet the transmission ratio conditions.
首先分析了增速机构设计在履带车辆电磁悬挂设计中的作用,通过选择增速机构的传动方案,得到了满足传动比条件的多级行星传动。
The relation between the radial deformation of the central internal gear in planetary gear transmission and the number of planet gears is derived in this paper.
导出了行星传动中的内啮合中心轮齿圈径向变形与行星轮数目之间的关系，并指出：从提高内啮合中心轮齿圈的柔度出发，行星轮数目应选择荐用范围的下限。
In this paper, the main constraints for the designing of NN type of involute planetary gear transmission are discussed, a concise and practical method for determining the addendum modification coefficients is proposed and some appropriate parameters are provided.
对NN型行星传动的主要限制条件进行了讨论，提供了一种简明实用的变位系数确定方法，推荐了参数选用
The Fuzzy Optimization of Multi-objective For the Planetary Transmission Based On The Genetic Algorithm;
基于遗传算法的行星传动多目标模糊优化
Research on the Gear Geometry of Cycloid Enveloping Planetary Transmission;
摆线包络行星传动啮合理论研究
In order to provide the reference to design eccentric wheel handspike planetary transmission,two contact bodies(eccentric wheel and the roller of movable tooth) have been regarded as the perfect elasticity and not to count the dynamic effect of load.
为给偏心轮推杆行星传动的设计提供参考,将偏心轮与活齿内滚柱两接触体视为完全弹性且不计载荷的动力效应,在考虑摩擦的前提下,对偏心轮与内滚柱接触的主应力、最大剪应力、最大八面体剪应力、最大正交剪应力进行了分析和计算。
The principle of transmission,basic structure,transmission ratio,meshing parameters and transmission efficiency of this kind of epicyclic transmission were discussed and analyzed in this paper.
提出了一种具有实用价值的外齿轮内平动式的新型少齿差行星传动。
In this paper, the characteristics and function of a new model of epicyclic transmission-corn distribution mechanism are described, and the calculation of the transmission ratio is performed.
论述了一种新型行星传动──排粮机构的特点、功能及其传动比计算。
Through optimization algorithm the reasonable distribution of modification coefficients between every gear pair was obtained which makes the sliding coefficient approaches to equality while the master and slave gears are engaging with the planetary gear,and reduces the rela.
基于两齿差外啮合行星传动的结构特点及失效形式,提出一种防止结构失效的齿轮参数优化设计方法,通过优化算法得到了各齿轮副间的变位系数合理分配,使得主、从动齿轮与行星轮啮合时的滑动系数趋于相等,减少各齿轮副啮合时的相对滑动,从而大大提高了这种新型结构的寿命。
A torsional dynamics model of steel/plastic compound planetary gear sets was developed to predict the natural characteristics under different compound configurations resulting in different compound modes of steel gears and plastic gears.
建立了钢/塑料齿轮组合行星传动的纯扭转动力学模型;对8种钢/塑料齿轮组合行星传动的固有特性进行了研究,分析了组合方式对行星传动结构的固有频率、振型及模态动能的影响;研究了温度对组合行星传动一阶固有频率的影响。
cycloidal-pin wheel planetary gearing mechanism
摆线针轮行星传动机构
The Topological Characteristics of Epicyclic Gear Trains Transmission and Automatic Generation;
行星传动拓扑特征及计算机自动生成
Research on Dynamic Response of Ring Gear of Panetary Gear
行星传动中薄壁齿圈稳态动响应研究
Influence of Planetary Needle Bearings on the Performance of Single And Double Pinion Planetary Systems
行星传动滚针轴承对单和双小齿轮行星齿轮传动性能的影响
Study on the Error and Drive Accuray of Cycloid Steel Ball Planetary Transmission;
摆线钢球行星传动的误差及传动精度研究
Study about the substitution of internal ring gear shape in star gear planet transmission
星齿行星传动中内齿圈齿形替代的研究
Optimal design of star gear planet transmission based on matlab optimization toolbox
基于Matlab优化工具箱的星齿行星传动的优化设计
fixed primary annulus
行星传动第一级固定齿轮
Basic terminology of planetary drives
GB/T11366-1989行星传动基本术语
Representation of drawings for cycloidal drives
GB/T10107.2-1988摆线针轮行星传动图示方法
Basic terminology of cycloidal drives
GB/T10107.1-1988摆线针轮行星传动基本术语
Research and Simulation of Planetary Continuously Variable Transmission;
行星传动无级变速装置的研究与仿真
The multi-objective fuzzy optimal design on the 2K-H form planetary transmission
2K-H型行星传动多目标模糊优化设计
azimuth planetary gear
方位行星轮传动装置
planetary gearing with small difference between the numbers of teeth
少齿差行星齿轮传动
Effects of Planetary Gears Number on Its Load Sharing;
行星齿轮传动中齿数对行星轮载荷的影响
planetary involute gear drive with small teeth difference
渐开线少齿差行星齿轮传动
marine planetary reduction gear
船用行星减速齿轮传动装置