The influence degree and rule of polystyrene weight aggregate replacement of crushed slag powder by iso-volume of 12%,24%,36%,48%,60% and 72% on the performance of static compressive strength elasticity modulus,Poisson\'s ratio and drying shrinkage ratio of concrete were measured and analyzed systematically.
通过试验系统测试和分析了废聚苯乙烯轻骨料以12%、24%、36%、48%、60%、72%等体积取代石渣粉时对混凝土静力受压弹性模量、泊松比、干燥收缩率性能的影响程度和规律。
A series of indoor experiments have been done to study compressive strength, compression modulus of resilience and cleavage strength.
在对冷再生混合料的配比和力学性能(抗压强度、抗压回弹模量和劈裂强度)室内试验的基础上,探讨了冷再生混合料力学性能的变化规律以及其影响因素。
Through the research on unconfined compressive strength and compression rebound modulus of cement stabilized aggregate in laboratory,and after analyzing the factors which affect these two indexes separately,the relationship between unconfined compressive strength and compression rebound modulus of cement stabilized aggregate is expressed.
通过室内试验研究水泥稳定碎石基层混合料的无侧限抗压强度和回弹模量,并对其各自影响因素进行分析,对水泥稳定基层的抗压回弹模量与无侧限抗压强度之间的关系作了论述。
The compression rebound modulus at different ages were tested with top surface measuring method,and the modulus development law with age was drawn.
为得到半刚性基层不同龄期的弯沉检测标准,在室内成型二灰土和二灰碎石试件,并在标准条件下养生;采用顶面法测定试件不同龄期的抗压回弹模量,得出其模量随龄期增长的规律,将其代入弹性层状体系理论简化公式中,得出不同龄期半刚性基层顶面弯沉值计算公式,并给出其实例应用的说明。
The uncertainty of compression modulus of elastomeric pad bearing.
本文根据JJF 1059-1999《测量不确定度评定与表示》的要求,系统地对公路桥梁板式橡胶支座的抗压弹性模量检测结果的不确定度进行了研究。
The uncer tainty of compression modulus of elastomeric bearing pads is evaluated and resea rched.
本文根据JJF1059-1999《测量不确定度评定与表示》的要求,系统地对公路桥梁板式橡胶支座的抗压弹性模量检测结果的不确定度进行了研究。
Test methods of mechanical properties of mortar for ferrocement-Test for static modulus of elasticity in compression
GB/T7897.6-1990钢丝网水泥用砂浆力学性能试验方法静力受压弹性模量试验
DYNAMICS RESPONSE CONTROL MODEL OF THE PIEZOELASTIC LAMINATED CYLINDRICAL SHELL UNDER HYDROSTATIC PRESSURE
考虑静水压力的压电弹性层合圆柱壳动力响应的控制模型
Spelter Castings has high congetation rate. This kind of sling is very soolidity and is often usde in static state situation.
浇铸钢丝绳索具的刚度和弹性模量大，固结率高，一般用于受静拉力的场所。
Study on Nonlinear Mechanics Behavior of Elastic Structure with Different Tension and Compression Moduli;
拉压不同模量弹性结构的非线性力学行为研究
Elasto-quasi-static Analysis of Multi-ring Gear Reducers
环板式减速器的弹性准静态受力分析
EXPERIMENTAL RESEARCH ON ELASTIC RESISTANT COEFFICIENT,DEFORMATION AND COMPRESSIVE MODULI OF SURROUNDING ROCK IN LARGE-SECTION LOESS TUNNEL
大断面黄土隧道围岩弹性抗力系数、变形模量与压缩模量试验研究
Study of the Modulus Optimization of Penstock Elastic Liner Based on 3-D Nonlinear Finite Element Method
基于三维非线性有限元法的压力钢管弹性垫层模量优选研究
DETERMINATION OF COEFFICIENT OF EARTH PRESSURE AT REST FOR COHESIONLESS SOIL BY USING STRESS VECTOR-BASED CONSTITUTIVE MODEL
用应力矢量本构模型确定无粘性土的静止土压力系数
Atomistic Simulations of Elastic Moduli in GaN Quantum Dots
GaN量子点弹性模量的分子动力学模拟
The Effect of Elliptic Cement Sheath Thickness and Elastic Modules on Casing Stress
椭圆水泥环厚度和弹性模量对套管受力的影响分析
Determining Compression Modulus of Soft Soil by Cone Penetration Test
应用双桥静力触探确定淤泥压缩模量
Elastic-plastic analysis for the deep-sea Ti-alloy pressure vessel subjected to external hydrostatic pressure
深海钛合金压力容器在静水压力作用下的弹塑性分析
Measurement of Young modulus of wood and the Materials Mechanics Performance
木材弹性模量的测量与材料力学性能
Plastics--Determination of compressive elastic modulus
GB/T14694-1993塑料压缩弹性模量的测定
Analysis of Compression Modulus of Resilience of Slab-Type Rubber Seat of Bridge
桥梁板式橡胶支座抗压弹性模量分析
Analysis on Elastoplastic of Thick Spherical Shell with Different Modulus of Tension and Compression
不同拉压模量厚壁球壳的弹塑性分析
elastic modulo
弹性模数[模量];弹性组件;弹性计量单位
Simulation on Static Characteristic of Pressure-Flow Composite Valve Based on AMESim
基于AMESim的流量-压力复合阀静特性研究