The influence degree of stiffener parameters to the baffle is studied based on the orthotropic experiment method and finite element method.
将正交试验法与有限元法相结合,定量地分析了加强筋的数量和形状对遮光罩动力学特性的影响程度;根据模态分析的结果,考察了单个加强筋的参数对其动力学特性的影响。
As thin-walled bars,stiffeners subjected to the axial pressure in ship panels may trip around their roots.
作为薄壁杆件,船体加筋板架中的加强筋在轴向压力的作用下可能发生绕定轴的侧向屈曲。
Based on this classification,the orthotropic plate in structure can be transformed into that in material with different methods, which means the stiffeners are to be converted into the plates added on by a certain method,and in further,it simulates the .
根据这两种分类将加筋板按不同的方法实现了结构正交异性向材料正交异性的转化,即将板上的加强筋按照一定的方法折合到所附连的板上,进而实现材料上正交异性板的有限元软件模拟。
Location optimization of stiffeners of transmission housing for a truck
载重汽车变速器壳体加强筋布置的优化设计
The layout optimization of stiffeners for engine flywheel housing of a truck was discussed.
论述了载货汽车发动机飞轮壳加强筋的布置优化设计。
An energy method is developed for analyzing the flexural torsional buckling behavior of flanged stiffeners subjected to axial force.
用能量法分析了面内受压的薄壁加强筋弯扭耦合屈曲，研究了柔性腹板加强筋和刚性腹板加强筋以及不同结构形式加强筋（对称型和不对称型加强筋）弯扭耦合屈曲特性，并考虑了截面变形和板后屈曲的影响。
A simple and feasible method was used in measuring the rib mark on the parts with GMT (Glass Fiber Mat Reinforced Thermoplastic).
对GMT(玻璃纤维毡增强热塑性复合材料)模压制件加强筋缩痕的大小进行定量表征,并对加强筋缩痕的成因进行分析。
This paper investigates process optimization for the specific rib with section s-3 during the gas-assisted injection molding firstly,which is to get relationship between process parameters and quality evaluations,based on the Taguchi experimental design.
对截面形状为s-3的加强筋进行工艺参数优化分析,讨论了气辅成型工艺参数对成型质量的影响程度,获得了一组较好的工艺参数组合。
For stiffening rib in space camera,shell element is usually used.
空间相机结构的加强筋,工程分析常常采用的是壳单元来模拟。
A woven polyester fabric forms the reinforcement in membrane.
该卷材是以聚酯纤维织物作为加强筋,通过特殊的挤出涂布法工艺,使双面的聚氯乙烯塑料层和中间的聚酯加强筋结合成为一体而形成的高分子卷材。
The mechanism and the variati0n of temperature and pressurein the cell after the reinforcement bars.
本文采用在传压介质（如叶蜡石等）棱边附近埋置加强筋的方法，有效地防止了样品从传压介质中被挤压冲出来，从而提高了实验的成功率。
The paper combines the method of orthogonal test with optimization, which can get the reasonable design of the shape and the wall thickness of rotarytable and the layout, the shape, the quantity of the reinforcement in it.
移动转台要求质量小而固有频率高,文中把正交试验设计方法与优化设计方法相结合,对转台框架形状、壁厚和加强筋的布局、形状、数量进行合理设计,能很好地处理质量与固有频率之间的矛盾。
The main defective modes of the strengthening rib are introduced.
对机车车体这样大型而复杂的结构,合理设计加强筋的形状、厚度以及对加强筋的位置进行合理布置,不仅能增大结构的强度和刚度,还便于制造,减少工料的浪费。
Front and rear reinforcing post will have shelf-clip adjustment holes at1/2- inch increments.
前、加强筋上每隔1/英寸有隔板调节孔。
Design of Stiffener in the Electronic Cabinet Based on the Three-Field Coupling Analysis
基于三场耦合的电子机柜加强筋设计
Base cabinets are reinforced with internal reinforcing front and rear posts and will have shelf-clip adjustment holes.
底柜前部和后部支撑有加强筋，筋上有隔板调节孔。
BEM for analysis of elastic plane problems with reinforced ribs
边界元法分析具有加强筋的弹性平面问题
3 Front and rear reinforcing post will have shelf-clip adjustment holes at 1/2-inch increments.
前、后加强筋上每隔1/2英寸有隔板调节孔。
Research of Metal Bracket Bead Layout Method Based on Topography Optimization
基于形貌优化的钣金支架加强筋布置方法研究
Location optimization of stiffeners of transmission housing for a truck
载重汽车变速器壳体加强筋布置的优化设计
mesh reinforced shotcrete
钢筋网加强喷射混凝土
can body dent
罐身加强圈, 罐身压筋
Strength and deformation properties of H-V reinforced clay
H-V加筋黏性土的强度与变形特性
Initially all structures were prestressed by high-strength bars.
起初，每个桥梁都是通过高强钢筋施加预应力的。
Studies on the Performance of Aeolian Sand Reinforced by Geogrids with FEA;
加筋风积砂强度和变形特性的有限元分析
Analysis on Safety Coefficient of Reinforced Earth Structure with FEM Strength Reduction;
用有限元强度折减法分析加筋土结构的稳定性
Study on Flexural Behavior of High-strength Reinforced Concrete Beams Strengthened with CFRP;
碳纤维布加固高强钢筋混凝土梁抗弯性能研究
Research on Steel Reinforced Concrete Slabs Strengthened with High-Strength Stainless Steel Wire;
高强不锈钢绞线加固钢筋混凝土板的研究
Consolidation of the Structure of Reinforced Concrete after Fire Damage;
钢筋混凝土结构火灾损伤后的加固补强
Study on the Characteristics of Food Processing for Flour of High Quality Wheat Variety Shaan 253
优质强筋小麦品种陕253面粉食品加工特性研究
Stability analysis on reinforced retaining wall by strength reduction method
基于强度折减法的加筋土挡墙稳定性数值分析