Fabrication of a High-density Fine-grain P/M Titanium Alloy by Mechanical Alloy and Vacuum Sintering;
机械合金化-真空烧结法制备致密细晶钛合金
Study of vacuum sintering technique of powder catalyst capsule;
粉末触媒合成柱真空烧结工艺的研究
The microstructure and doping of Nd:YAG ceramics prepared by vacuum sintering were analyzed by X-ray diffraction (XRD), absorption spectra, digital metalloscope, scanning electron microscope (SEM) and energy dispersive spectrometer (EDS).
利用X射线衍射(XRD)、吸收光谱、数字金相显微镜、扫描电镜(SEM)和能谱(EDS)分析了真空烧结法制备的掺钕YAG陶瓷的显微结构和掺杂情况。
Hardness and strength of the substrate of vacuum melting Cobase alloy-WC composite coating is low.
真空熔烧钴基合金-碳化钨硬面涂层材料基体的硬度和强度较低,采用正火或调质处理的方法提高基体的硬度和强度。
Hardness and strength of the substrate of vacuum melting Ni based alloy-WC composite coating is low.
经过真空熔烧Ni基合金 +WC复合涂层的 4 5钢基体的硬度和强度都很低 ,为了提高基体的硬度 ,对涂层后的材料进行调质处理。
A series of Co base alloyWC coatings have been obtained on the surface of 45 steel with vacuum melting method.
用真空熔烧方法在45钢表面烧结Co基合金 WC复合涂层,测定几种不同WC含量涂层截面的显微硬度和涂层的耐磨性,并分析涂层显微硬度与耐磨性的关系。
Effect of heat treatment on Ni-WC-RE composite coating by vacuum fusion sintering;
热处理对真空熔烧Ni-WC-RE涂层的影响
The Ni based alloy/WC composite coating materials is successfully got by vacuum fusion sintering method on the surface of 45 steel.
在 45钢表面上成功地用真空熔烧法制得 Ni基合金 - WC复合涂层 ,并用电子扫描分析仪、电子探针 X射线衍射仪、显微硬度计等仪器对涂层的微观结构及显微硬度分布进行研究。
The technique of vacuum fusion sintering is introduced emphatically.
重点介绍了采用真空熔烧法制备功能梯度材料。
Effects of Processing Parameters in Vacuum Sintering on Properties of Cu Powder Samples
真空烧结工艺参数对铜粉烧结性能的影响
Design and Study on the Auto Control System of HIP-Sinter Stove;
低压真空烧结炉自动控制系统研究与设计
Integral Vacuum Sintering Furnace Manufactuved by Xiangtan Xinda P/M Equipment Manufacturing Company Ltd
湘潭新大粉末冶金设备制造有限公司的一体化真空烧结炉
Research on Properties and Fabrication Technique of Aluminum Foam with Press-Dissolution-Vacuum Sintering Progress;
冷压—溶解—真空烧结法制备泡沫铝工艺及性能的研究
Effect of alloy additives on the friction and wear properties of vacuum sintering FeAl matrix composite frictional materials
合金元素对真空烧结FeAl基摩擦材料摩擦学性能影响的研究(英文)
For prolonged atmospheric sinter firing and infiltration firing of VITA In-Ceram frameworks created using the slip technique.
用于由堆涂技术制成的VITA全瓷支架的长时间非真空烧结和渗透培烧。
STUDY ON NANO-SIZED AlN CERAMICS BY HOT PRESSED SINTERING
真空热压烧结纳米氮化铝陶瓷的研究
Study on VC/Cu Composite Fabricated by Hot Pressing Sintering
真空热压烧结VC/Cu基复合材料的研究
Microstructure and Properties of Al_2O_3/Cu-Cr Composites Prepared by Vacuum Hot-pressed Sintering
真空热压烧结Al_2O_3/Cu-Cr复合材料的组织与性能
Research on the Vacuum Extrusion For Production of Non-Sintering Flyash CeramIsite
真空挤压生产免烧结粉煤灰陶粒的研究
Effect of Vacuum Hot-pressed Sinter on Properties of Cu/WC Composite
真空热压烧结对Cu/WC复合材料性能的影响
Practices and upgrading of rubber belt vacuum filter in red mud washing system of sintering process
橡胶带式真空过滤机在烧结法赤泥洗涤系统的实践及改进
Researches on application of tilting-pan type vacuum filters in the sintering process to separation of red mud
翻盘式真空过滤机在烧结法赤泥分离中的应用研究
Experimental study on sintering to extract Al by low-valency compounds in vacuum
真空下低价化合物法提取铝的新工艺——原料烧结实验研究
Microstructures and Properties of Hard Materials Coating on Die Steel Surface by Vacuum Powder Sintering;
真空粉末烧结法在模具钢表面制备的硬质覆层的组织和性能
Study on Pressureless Vacuum Powders Sintering of NIB and IN738 for Bonding Repairing Superalloy
NIB与IN738混合粉末真空无压烧结连接修复高温合金
Fired hollow bricks and blocks
GB13545-1992烧结空心砖和空心砌块
IPSEN International supplies companies in the automobile, aircraft and space industries, as well as tool and machine builders, manufacturers of medical equipment and commercial heat-treatment shops.
易普森产品广泛应用于各种工艺，包括气氛和真空热处理、离子渗碳、焊和烧结。