External Epoxy Powder Coating Process for Sudanese Oil Pipeline;
苏丹输油管道环氧粉末外涂敷工艺技术
Reaserch on fire-retardant and antistatic rigid PVC coating pipes;
阻燃、抗静电硬质PVC涂敷管的研制
But it's rare to be reported in application pipeline coating.
差示扫描量热法(DSC)技术近年来广泛应用于高分子材料领域,已成为实验室研究热固性树脂固化特性,确定固化生产工艺的一种常用手段,但在管道防腐涂敷施工方面很少报道。
In addition, corrosion resistance and cross section morphology of (Ni-Mo-P)-PPS coating after surface polymer compound painting was tested.
对随热处理温度升高Ni-Mo-P、(Ni-Mo-P)-Al2O3及(Ni-Mo-P)-聚苯硫醚镀层的耐蚀性能变化作了对比研究;并对(Ni-Mo-P)-聚苯硫醚镀层进行表面复合涂敷,研究了涂敷后试样的截面形貌及其耐蚀性,结果表明,(Ni-Mo-P)-聚苯硫醚镀层耐蚀性良好,高温(85℃)10%H2SO4腐蚀速率为Ni-Mo-P镀层的1/3;复合涂敷层具有极良好的耐蚀性,涂敷层与镀层间无明显间隙。
In this paper,the experimental metho d are presented for laser cladding monel and rare earth and ceramic alloy coating s on the 45 # steel surface using a transverse-flow CO 2 laser with an output power of 2 kW.
:本文用 2 k W横流 CO2 激光器在 45 #钢表面上激光涂敷蒙乃尔合金与稀土陶瓷混合粉末 ,利用HX- 10 0 0型显微硬度计及金相显微镜来分析观察涂层表面硬度分布情况及涂层与基体之间的金相显微组织形貌。
Use the applicator provided to spread the glue.
使用所附涂敷器涂用胶水.
Research on Painting Effect Evaluation Modeling of Infrared Camouflage Paints
红外隐身涂料涂敷效果评估模型研究
Research on Coating Process for Cold-mould of Centrifugal Casting Cast Iron Roller
离心铸铁轧辊冷型涂料涂敷工艺研究
Very good stable curing shapes without stringing and slumping are achieved at super high speed dispensing and very amall dots.
尽管超高速涂敷、微少量涂敷仍可保持没有拉丝，塌陷的稳定形状。
Designed and Using of Internal Coating Equipment for Large Diameter Steel Pipe
大口径钢管内涂层涂敷设备的设计与应用
Study on UV-Resistant Coatings System Which Could Be Applied on High Temperature(70 ℃) Steel Surface
可在70℃钢界面直接涂敷的抗UV涂层体系研究
Test methods for coating powders for electrical insulation
GB/T6554-1986电气绝缘涂敷粉末试验方法
fission product retaining coated fuel particle
保持裂变产物的涂敷燃料颗粒
Process of cement mortar lining with coating machine on the inside surface of steel pipes
钢质管道水泥砂浆衬里涂敷工艺
Study of the Performance and Preparation of YSZ Electrolyte Membrance by Dip-Coating;
浸渍涂敷法制备YSZ电解质及性能研究
RCS simulation of electrically large target coated with chiral medium
涂敷手征媒质的电大目标RCS仿真研究
Study on Process of Three Layer Polyethylene Coating at Low Temperature
3PE防腐层低温涂敷工艺及性能研究
Surface-coating techniques may be classified into two major types: brittle coatings and photoelastic coatings.
表面涂敷技术分为两个主要类型：脆性涂层和光弹性涂层。
Mineral oil: For use only in local application or for lubricant use.
矿物油：仅限于作为局部涂敷或润滑之用。
Modification Method Optimization and Preparation of Nano-SiO_2 Modified Resin Coated Sand
纳米SiO_2树脂涂敷砂的改性方法优选与制备
A Newly Approach of 3PE Pipe Coating-multi-layer Polyolefin Coating
钢管3PE外防腐多层聚烯烃涂敷新工艺介绍
Research of Characteristics of Covering Material for Storage Bulb and the Coating Process of Hydrogen Maser
氢频标贮存泡涂敷材料特性及工艺研究
Development and application of composite sopilite heat-insulated paint
涂敷型海泡石复合隔热材料的研制及应用