Electroless nickel-phosphor plating process on surface of quartz optical fiber;
石英光纤表面化学镀镍磷合金工艺
Research of technology and kinetics of electroless nickel-phosphorus alloy plating on quartz optical fiber surface;
石英光纤表面化学镀镍-磷合金工艺及动力学研究
Thick nickel electroplating on the surface of electrolessly deposited nickel–phosphorus–boron alloy on quartz optical fiber
石英光纤表面镍-磷-硼化学镀层上电镀厚镍
A system w1th quartz fiber, an optical spectrometer, a CCD detector and a computer was used to on-line optical spectroscopy analysis.
利用石英光纤、光栅光谱仪、CCD探测器、微机组成在线光谱分析系统。
This paper mainly discusses the research of a new-type quartz fiber spherical probe.
本文研制了一种实用化石英光纤球形头。
Auto-Coupling System for Single-Mode Silica Optical Fiber and Polymer Optical Fiber;
单模石英光纤和塑料光纤自动耦合系统
Using Freon (CCl_2F_2) as fluorine source, fluorine-doped silica optical fiber claddings are prepared by the MCVD method.
用MCVD(改进的化学气相沉积)工艺,以氟里昂(CCl_2F_2)为掺氟源制备了掺氟石英光纤包层。
We report the experimental resultS of second-harmonic seneration (SHG) in the silica optical fiber using the prepared method and the microstructure change inner the fiber observed by the transmission electron microscope (TEM).
报道了采用预置法使石英光纤中产生二次谐波及由透射电子显微镜观察预置前后光纤内部物质结构变化的实验结果。
Applications of multi-component glass fiber, silica fiber and polymer optical fiber to medical illumination are introduced.
介绍了多组分玻璃光纤、石英光纤和聚合物光纤在医学照明上的应用,现今医学上应用的光纤传光束以多组分玻璃光纤为主,传光束直径多在0。
By using the multiple carrier model and uniaxial symmetry and photoinduced mechanisms, the relationships of electrooptic coefficient γ with the distance d of D fiber, poling time t and applied voltage V in the silica fiber after the thermal/electric field poling (TEFP) are theoretically calculated.
利用多载流子模型及单轴对称和光激励机理 ,从理论上计算了经热及电场诱导后的石英光纤的电光系数γ与D型光纤的距离d、诱导时间t和外加电压V的关系。
The two different kinds of schemes for silica fiber poling,adulterant and/or photoinducing and electrical poling,are discussed in the paper.
首先讨论和比较了两种不同诱导石英光纤的方案，即掺杂物和／或光诱导方案及电场诱导方案，分析了它们各自的特点，在此基础上提出了一种新的诱导方法。
hard plastic clad silica optical fiber
硬塑料包层石英光纤
step index hard-clad silica fiber
突变型硬包层石英光纤
Auto-Coupling System for Single-Mode Silica Optical Fiber and Polymer Optical Fiber;
单模石英光纤和塑料光纤自动耦合系统
low-loss FEP-clad silica fiber
低损耗全氟乙烯丙烯包层石英光纤
loose polymer-clad silica fiber
松套聚合物-包层石英光纤
Research on Yb~(3+) doping mechanism of ytterbium-doped fiber
掺镱石英光纤中Yb~(3+)掺杂机理的研究
Research of Electroless Nickel Plating on the Surface of Quartz Optic Fiber Grating and the Sensing Characters;
石英光纤光栅表面化学镀镍及其传感特性研究
Thick nickel electroplating on the surface of electrolessly deposited nickel–phosphorus–boron alloy on quartz optical fiber
石英光纤表面镍-磷-硼化学镀层上电镀厚镍
Nickel Electroplating on Surface of Electroless Ni-P Plated Quartz Optical Fiber
预化学镀石英光纤表面电镀镍层的研究
Stimulated Raman Scattering and Stimulated Four photon Mixing in Er doped Silica Fiber
掺铒石英光纤中的受激拉曼散射及受激四光子混频
Formation of SRS Spectrum and Its Energy Transformation in Silica Fiber;
石英光纤中受激喇曼散射光谱形成及其能量转换
Air breakdown in coupling area of high peak power laser pulse and silica optical fiber
高峰值功率脉冲激光与石英光纤耦合的空气击穿问题
Pumping efficiency analysis and progress of 2μm Tm~(3+) doped silica fiber lasers
2μm掺Tm~(3+)石英光纤激光器的泵浦效率分析和研究进展
The theory, method and procedure for measurement of the bending loss of single-model quartz fiber by using fiber Bragg grating sensor are introduced.
阐述了利用布拉格光纤光栅传感器测量单模石英光纤弯曲损耗实验的原理、方法和步骤。
pure silica core single-mode fiber
纯石英纤芯单模光纤
germanium-doped silica core single mode fiber
掺锗石英心单模光纤
germanium-doped silica core multimode fiber
掺锗石英心多模光纤
doped-silica graded fiber
掺杂石英渐变型光纤