Determination of larson-miller parameter for 15CrMo heat resistant steel and its application;
15CrMo耐热钢Larson-Miller参数值的确定与应用
Determination and verification of Larson-Miller parameter for pearlitic heat resistant steel 12Cr1MoV;
珠光体耐热钢Larson-Miller参数的确定与验证
Investigation on the microstructure of Fe-0.06C-12Cr-1.9W-0.5Mo-3.0Co-VNbN heat resistant steel;
Fe-0.06C-12Cr-1.9W-0.5Mo-3.0Co-VNbN耐热钢的显微组织分析
Electrolytically activated hot-dip and diffusion-treated aluminizing layers on the CrNiNRE austenitic heat-resistant steel;
CrNiNRE奥氏体耐热钢的电解活化热浸扩散渗铝研究
Oxidation resistant property of austenite heat-resistant steel replacing Ni by Mn and N;
以Mn、N代Ni奥氏体耐热钢的高温氧化
Valence electron theory analysis of service temperature of low alloy heat-resistant steel in common use;
常用低合金耐热钢使用温度的电子理论分析
Welding of the refractory steel10Cr Mo910;
10CrMo910耐热钢的焊接
By means of SEM,EDS and XRD, the degradation of austenitic refractory steel Cr30Ni20NRE in the enviroment of long-term and high-temperature unilateral carburizing was investigated.
应用SEM,EDS及X射线衍射等方法分析研究了高镍铬含氮奥氏体型耐热钢Cr30Ni20NRE在长期高温渗碳环境运行中的蜕变。
The NiCrAlY+(ZrO2+Y2O3) thermal barrier coating was prepared on the surface of refractory steel (1Cr18Ni9Ti) by plasma spraying technique.
利用等离子喷涂法在耐热钢1Cr18Ni9Ti基体表面喷涂NiCrAlY+(ZrO2+Y2O3)陶瓷热障涂层,并进行高温隔热性能试验,用XRD、SEM检测了试样的金相组织、结构及形貌,结果表明,陶瓷热障涂层与1Cr18Ni9Ti基体结合紧密;表面陶瓷层经高温氧化后处理后其硬度显著增高;进行850℃高温隔热性能试验,1Cr18Ni9Ti表面热障涂层隔热能力显著提高,达75℃。
These high temperature materials include heat-resisting steels, iron-base nickel-iron-base, nickel-base, titanium-base alloys, intermetallics and also super-high temperature tungsten-base refractory alloys.
综述了耐热钢、铁基、铁 镍基、镍基、钛基合金、金属间化合物以及钨基超高温材料的发展、应用及其在高温合金领域中的重要研究进展。
in this paper, The structure and The properties of 3Cr25Ni12 heat-resisting steel are inuestigated, and both the hot strength and the mechanism of oxidizing resistence of the steel are also discussed.
研究了３Ｃｒ２５Ｎｉ１２耐热钢的组织结构与性能，并对３Ｃｒ２５Ｎｉ１２耐热钢的高温强度、抗氧化性等性能进行了探讨，结果表明，３Ｃｒ２５Ｎｉ１２耐热钢的奥氏体基体上有弥散分布的二次碳化物Ｍ２３Ｃ６析出，这是３Ｃｒ２５Ｎｉ１２耐热钢具有较高热强性的主要原因之一；奥氏体基体中含有较高的铬合金元素，使其抗氧化性能力得到提
The vacuum diffusion bonding between K5 heat-resisting alloy and 2Cr12NiWMoV heat-resisting steel was studied,and the effects of the welding parameter T,P and also the interlayer thickness on the microstructure and properties of the joint were investigated.
本文通过Ｋ５耐热合金与２Ｃｒ１２ＮｉＷＭｏＶ耐热钢的真空扩散连接，研究了焊接工艺参数Ｔ、Ｐ、ｔ及中间层厚度对接头组织与性能的影响规律。
At present,power station unit with large capacity and high steam parameters is an effective way to increase thermal efficiency of the fuel and reduce the release of CO_2 emission,but increased operating parameters,especially the steam temperature, presents a higher demand for the heat resistance steels applied for power station boiler.
机组运行高参数(尤其是蒸汽温度)运行,对电站锅炉用耐热钢提出了更高的要求。
Heat-resisting steel bars
GB/T1221-1992耐热钢棒
Mackenite metal
麦克内特镍铬耐热钢
Research on Brittleness of Heat Resistant Steel 1Cr12Ni3Mo2VN(M152)
1Cr12Ni3Mo2VN(M152)耐热钢的脆化机制
Cold rolled stainless steel and heat resisting steel strips
GB/T4239-1991不锈钢和耐热钢冷轧钢带
Stainless and Heat-Resisting Steels
不锈钢材及耐热钢材标准对照表
Effect of heat treatment on properties of ASTM S30432 austenitic heat resistant steel
热处理对ASTMS30432奥氏体耐热钢性能的影响
Heat Treatment Process for 23-8N Austenitic Heat Resistant Steel
23-8N奥氏体耐热钢热处理工艺研究
Study on the Microstructure and Properties of a Special Low-Alloy Steel with Wear-Heat Resistance;
特种低合金耐磨耐热钢组织和性能的研究
continuous annealing unit with open web heat resistant steel rollers
空腹耐热钢炉辊连续退火机组
Technical standard for heat resistant steel castings of petrochemical tubular heater
石油化工管式炉耐热钢铸件技术标准
Study on Microstructure and Properties of 10CrMoWVNbN Steel;
10CrMoWVNbN铁素体耐热钢组织与性能研究
Z-parameter Method for Life Prediction and Its Application of Heat-resistant Steels;
耐热钢寿命预测的Z参数方法及应用
Study on Aged Toughness of Heat Resistence Steel at the Condition of Serving;
服役条件下耐热钢时效韧性（度）的研究
Welding of Heat-resistant Steel SA312-T92 Used in USC Power Station Boiler
USC电站锅炉用耐热钢SA312-T92的焊接研究
EVALUATION OF MATERIAL DEGRADATION FOR AUSTENITIC HEAT-RESISTING STEEL BY USING MAGNETIC METHOD
磁性法评价奥氏体耐热钢的材质劣化
Classification, Corrosion Resistant & Heat Resistance of Stainless Steel
不锈钢之分类，耐腐蚀性及耐热性
Study of Erosion Resistance of Cast Hot-working Die Steels in Molten Aluminum;
铸造热作模具钢耐铝热熔损性能研究
Research on Hot Deformation Process of 403Nb Heat-resistant Martensitic Stainless Steel
403Nb马氏体耐热不锈钢热加工工艺研究