Electrode arc equation and thermodynamic analysis of submerged arc welding with constant current power supply;
自动埋弧焊接过程的电弧控制方程与热学分析
Study on process properties of metal cored wire for stainless steel submerged arc welding;
不锈钢埋弧焊用金属芯焊丝工艺性能的研究
New method of signal processing for weld tracking system of submerged arc welding;
新型埋弧焊焊缝跟踪系统的信号处理方法
Preclusion of Terminal Crack for Longitudinal Weld of PressureVessel During SAW;
压力容器筒体纵缝埋弧焊终端裂纹的预防
Study of H bridge circuit in SAW wire feeding;
埋弧焊H桥送丝电路研究
Improving shaping quality of SAW seam with pulse technique;
利用脉冲技术改善埋弧焊的焊缝成形质量
A brief talk on the application of MAG welding and submerged-arc welding in box-type derrick;
浅谈MAG焊和埋弧焊在箱式井架的应用
Design of Submerged-arc Welding Machine with Seam-tracking Controlled by One Chip Computer;
单片机控制带焊缝跟踪埋弧焊机设计
Also,the principle and advantage of submerged-arc welding compared to stick welding is illuminated,the influence of welding flux,parameter,process to seam is analyzed.
设计的工频高压脉冲引弧器通过引入电磁干扰滤波器等完善措施,提高了焊缝合格率,消除了高频高压辐射对人体的伤害和周围设备的电磁干扰;列举了TIG焊机的故障及处理方法;简要概述了埋弧焊接的工作原理和相对于手工焊的优点;分析了焊剂、焊接规范、工艺等因素对焊缝的影响。
Regarding to submerged arc weld multi-pass weld track and height of weld gun,two-dimension track system is designed.
针对埋弧焊多道焊的焊缝跟踪以及焊枪高度跟踪问题,设计了一种二维跟踪系统。
It states the flux affect on metal properties of submerged arc weld seam from flux composition,metal properties,chemical analysis,dissolve[O]contents etc.
从焊剂的组成、冶金性能、化学性能、溶解[O]含量等方面,阐述了焊剂对埋弧焊焊缝金属冶金性能的影响。
The paper is about SUS304 submerged arc weld in welding material choice,mechanical properties test,hot cracking by Method of Rigid Restraint Cracking Test for Welding Butt Joint,loss of alloy element etc.
针对SUS30 4不锈钢埋弧焊在焊材选用、力学性能试验、刚性拘束下的开裂及合金元素烧损等问题进行了工艺试验和理论分析 ,解释了SUS30 4不锈钢埋弧焊中常见的几个问题 ,并为此类钢种的埋弧焊接提供了实践和理论依
Effect of arc offset on the quality of submerged arc welding and improving measures of the welding technology;
弧偏吹对埋弧焊接质量的影响和焊接工艺改进措施
Based on Buck DC/DC converter,an arc stability controller was designed for submerged arc welding(SAW).
基于Buck DC/DC变换器,设计了埋弧焊接(Submerged arc welding,SAW)过程的稳弧控制器。
This article is focused on the progress in the development of bridge steel 14MnNbq and its matching submerged arc welding wires of WQ series in Wuhan Iron and Steel Corporation.
重点介绍武钢首批试制的天兴洲大桥14MnNbq超厚板(60mm)与匹配的WQ系列桥梁钢埋弧焊丝研制进展情况。
This article is focused on the progress in the development of bridge steel 14MnNbq and its matching submerged arc welding wires of WQ family in Wuhan Iron and Steel (Group) Corporation.
本文重点介绍了武钢首批试制的天兴洲大桥14MnNbq超厚板(60mm)与武钢技术中心开发研制的WQ系列桥梁钢埋弧焊丝匹配研制进展。
transverse submerged arc welding
横列双丝并联埋弧焊
series submerged arc welding (SAW-S)
横列双丝串联埋弧焊
Design of Submerged-arc Welding Machine with Seam-tracking Controlled by One Chip Computer;
单片机控制带焊缝跟踪埋弧焊机设计
The Modification to Inside Weld Grinding Machine for JCOE Formed Longitudinal Submerged Arc Welded Pipe
JCOE直缝埋弧焊管内焊缝磨削机的改造
Inside Weld Crack Analysis and Control of SSAW Pipe
螺旋埋弧焊管内焊缝裂纹分析与控制
Cause Analysis on Weld Brittleness of X80 Grade SSAW Pipe
X80级螺旋埋弧焊管焊缝脆化原因分析
Study on the SAW Weldability of X100 Pipeline Steel
X100管线钢埋弧焊焊接性能研究
Research on SAW Weld Toughness Fluctuation of X80 Grade Pipeline Steel
X80级管线钢埋弧焊焊缝韧性波动研究
Discussion on procedure for submerged are welding of 316L extra-low-carbon stainless steel
316L超低碳不锈钢埋弧焊焊接工艺探讨
Application of pulse submerged arc welding technology in the X80 alloy steel weld
脉冲埋弧焊技术在X80钢焊接中的应用
Signal Testing and Processing in the Seam Tracking System of Arc-swing-typed Submerged Arc Welding;
摆动电弧埋弧焊焊缝跟踪信号检测与处理
Research on the Magnetic-controlled Arc Seam Tracking System for Thin Wire Submerged Arc Welding
磁控电弧细丝埋弧焊焊缝跟踪系统的研究
Amendment to the Weld Reinforcement Measurement of SAW Pipe with General Welding Measurement Ruler
通用焊接检验尺测量埋弧焊管焊缝余高的修正
The Application of the Broken Wire Submerged Arc Weldng in the Infall Trash Screen of the Three Gorges Project
碎焊丝埋弧焊在三峡电站拦污栅焊接上的应用
Longitudinal Submerged Arc Welded Pipe Weld Tracking Method and Misalignment Analysis
直缝埋弧焊管焊缝跟踪方法与焊偏分析
The Welding Experimentation of 12Cr1MoVG Tube Platen and Analysis of Manual Arc Welding Cracks
膜式窄节距12Cr1MoVG管屏埋弧焊接试验及手工电弧焊补焊裂纹分析
Research on Device of LSAW Pipe Run-on and Run-off Tab
直缝埋弧焊管引(熄)弧板切割装置的研制
Analysis of arc interference and control strategy for double wire AC-DC SAW
交直流双丝埋弧焊电弧干扰分析及控制策略