Computer optimization control system for dynamic ingot discharged prediction of soaking pit and its application;
均热炉群钢锭烧好动态预报计算机优化控制系统及其应用
Self-optimizing controller for combustion of soaking pits;
马钢均热炉燃烧过程自寻最优控制器
Experiments on the Effects of Different Deposited Metals on the Service Life of Tongs for Soaking Pit;
不同堆焊材料对均热炉钳吊吊牙使用寿命的试验研究
Research of temperature control system for regenerative soaking furnace;
蓄热式均热炉炉温控制系统的研究
Change of composition and structure of Al_2O_3-SiO_2 castables for soaking furnace bottom roller of the CSP system at work;
均热炉底辊用Al_2O_3-SiO_2质浇注料在使用过程中的相组成和结构变化
By the concrete index and using request of 1 375 ℃ high strength castable refractory, 1 204 ℃ heat insulating refractory, 1 260 ℃ heat insulating refracrory,1 09 3℃ heat insulating refractory and 1 316 ℃ Si castable, the castable refractory for CSP billet soaking furnace is researched, which is acquired the good using effect.
根据CSP薄板坯均热炉用1375℃高强度浇注料、1204℃隔热浇注料、1260℃隔热浇注料、1093℃隔热浇注料和1316℃熔合硅浇注料的具体指标和使用要求,结合国内耐火原料的特点,研制出了满足CSP薄板坯均热炉使用需要的耐火浇注料,达到了预期效果。
In view of existing caculation deviation of slab temperature and controlling difficult of acceleration point and swing stage of pit furnace,some optimization measures were applied,and good effects were abtained.
针对CSP生产线连铸机实现两流生产后均热炉存在板坯实时温度计算偏差、加速点设定不合理和摆渡段控制不完善的问题,调整了均热炉的升温步长、加速点的温度偏差值和摆渡段的优化控制,取得了很好的效果。
On the base of research for the heating process in the pit furnace and summing up the operation practice, this paper established a controlling model about heating steel ingot in the pit furnace by combinati0n expert system with mathematical model.
通过对均热炉加热工艺的分析研究,在总结连热炉操作经验的基础上，建立了一个专家系统与数学模型相结合的连热炉钢锭加热控制度型，用该模型对某大型初轧厂均热炉加热过程进行离线模拟,证明是准确可靠的,对生产工艺以炉子的在线控制具有一定的指导意义。
Process simulation of reheating furnace of CSP production line of Zhujiang Iron and Steel Company;
珠钢CSP生产线均热炉过程模拟
The thermal states of the steel workpieces heated in a reheating furnace are used to optimize the control of the furnace.
主要讨论如何基于工件 (钢锭、钢坯等 )的热状态来进行均热炉的优化控制 。
Numerical simulations about applying high temperature air combustion technology to rebuild a cell pit furnace were carried out.
系统研究了高温空气燃烧技术改造均热炉的各种方案 。
The technical modification of a cell pit furnace combustion system by introducing high-temperature air combustion (HiTAC) can lead to a reduction of gas consumption and an enhancement of temperature field uniformity.
应用高温空气燃烧技术改造传统均热炉燃烧系统 ,可以节约燃气的消耗率 ,提高炉内温度场的均匀性。
Discussion on the plan of the Gas Station Useing the Gas of Generating Furnace for the Soaker at the Blooming Workshop of No.2 Rolling Plant;
关于二轧厂初轧车间均热炉用煤气站方案探讨
bottom two way fired pit
炉底双侧烧嘴均热炉
Used for lining in blast furnaces ,hot air stoves ,coke ovens and other industry furnaces.
用于各种工业炉窑的耐火内衬，如高炉、热风炉、加热炉、均热炉、锅炉等。
telescopic-type soaking pit crane
均热炉用伸缩式吊车
QUANTITATIVE ANALYSIS OF BENEFITS OF CHARGING TEMPERATURE OF STEEL INGOT OF SOAKING PIT
均热炉钢锭装炉温度效益的定量分析
Energy-Saving Rebuilding to Raise the Energy Utilization Efficiency of the Soaking Pit of Burning Natural Gas
提高天然气均热炉热效率的节能改造
A Fuzzy Control Burning System for The Blooming Mill Pit Furnace
初轧均热炉燃烧过程模糊控制系统
The Design and Study of Full-Automatic Control System of Regenerative Soaking Furnace;
蓄热式均热炉全自动控制系统设计与研究
The Optimization and Application of CSP Furnace Burning Process Control System
热轧均热炉燃烧过程控制系统优化及其应用
Application of Series 9000 Distributed System in Soaking Pit Combution Control System
9000系列集散系统在均热炉燃烧控制中的应用
ON AIR SUPPLY PROBLEMS AND THE SOLUTION OF SOAKING FURNACE WITH ONE SIDED UPPER BURNER
上部单侧烧嘴均热炉供风问题及解决途径
Algorithm of Fuzzy Sliding Mode Iterative Leaning Control for Rolling Mill Temperature
均热炉温度模糊滑模迭代学习控制算法
The40 t manipulator is a kind of flooring crane used for removing the cover of the soaking furnace at time of ingot charging and cleaning.
落地式揭盖机是用于均热炉上供装运钢锭、扫炉底时揭盖和封盖的一种落地式起重机。
Some people prefer electric stoves because, although they are slower to heat, the heat is considered more even.
有人喜欢用电炉，因为电炉虽然热得较慢，但发热较均匀。
The shell and cover of the waste gas preheating section and NOF heating furnace.
炉气预热段及NOF加热炉的炉壳及炉盖;
heat recovery boiler
余热锅炉，废热锅炉
Large food items should be left inside the oven for an additional10-20 minutes after cooking to ensure even distribution of heat.
大件食物于烹煮后，应放置炉内10至20分钟，让热力均匀散布。
In equalizing zone there are cooling air tubes of exhaust type and electrical heater for temperature control required by steel grade. The lining of this zone is as same as that of spray cooling zone.
均温段有抽风式冷却风管和电热器,根据不同规格的钢带调节炉温。
Improvement and Data-processing of Measured Way of Even Quality about Temperature distribution inside the Heat-treating Furnace;
热处理炉温度均匀性测量方法的改进及数据处理