Some new processes and technologies for electronics finishing were introduced, such as wafer plating, electrochemical mechanical polishing, microelectro-mechanical system plating, copper plating using insoluble anode, platinized niobium electrode, lead and cadmium free eleclroless nickel, recycling of alkaline etching solution and reclaiming system of copper.
介绍了电子电镀中的若干新工艺新技术,如芯片电镀、电化学机械研磨、微机电系统电镀、不溶性阳极电镀铜、镀铂铌电极以及无铅无镉中磷光亮化学镀镍、碱性蚀刻液再生和铜回收系统等。
A reagent for removing lead of alkaline waste etching liquid and its removing lead rate equation by quadratic orthogonal designing;
二次回归正交法碱性蚀刻废液除铅剂配方设计及除铅方程
Recovery of Copper Extracted from the Spent Nitric Etching Solutions of Printed Circuit Board Using CP-150
利用CP-150萃取回收PCB碱性蚀刻废液中的铜
Alkaline etching of the comprehensive utilization of waste water-Hydrazine hydrate to restore the recovery of copper
碱性蚀刻废液的综合利用----水合肼还原回收铜
A New Technology for Production Basic Copper Carbonate from Waste Etching;
利用含铜蚀刻废液合成碱式碳酸铜新工艺研究
Recycle of Spent Acidic Etchant for Printed Circuit Board
印制电路板酸性蚀刻废液的回收利用
Experimental Research on the Characteristics of the CrMo Steel by Etch Solution;
蚀刻液对CrMo钢蚀刻特性的实验研究
Study on the electrode process kinetics of recycle of spent acidic etchant for printed circuit board
印刷电路板酸性蚀刻废液回收工艺中电极反应过程动力学研究
Technics for Producing Bluestone from the Waste Liquid Engendered from the Etching of Circuit Boards;
从刻蚀电路板废液中制取硫酸铜的工艺研究
Reuse treatment of spent copper-containing etching solution for printed circuit board-Part II
印刷线路板含铜废蚀刻液的回用处理(二)
Reuse treatment of spent copper-containing etching solution for printed circuit board-Part Ⅰ
印刷线路板含铜废蚀刻液的回用处理(一)
Study on Trace Zinc and Nickel Removal in Ferric Chloride Preparation Technology Using Waste Etchant and Waste Acid
利用蚀刻废液和废酸制取三氯化铁工艺中微量锌镍去除研究
Novel Centrifugal Extraction-stripping Process-Treating Spent Etchant from Printed Circuit Board Industry Environmentally Friendly;
离心萃反联合新工艺—环境友好处理印制线路板蚀刻废液
Corrosion Resistance of Electroless Ni-P Alloy on Carbon Steel in Alkaline Solution
碳钢Ni-P化学镀耐碱性溶液腐蚀性能的研究
Research on Corrosion Resistance of V_3TiNi_(0.56)M_X(M=Al, Cr) Hydrogen Storage Alloys in Alkaline Solution;
V_3TiNi_（0.56）M_x（M＝Al，Cr）贮氢合金耐碱液腐蚀性能研究
Study on Stress Corrosion Cracking of 304L Stainless Steel in Caustic Solution at High Temperature;
304L在高温碱性溶液中应力腐蚀开裂的研究
Effect of Concentration of Impurity NaClO_3,on Corrosion Resistance of 1Cr18Ni9Ti Stainless Steel in High-Temperature Caustic Solution
高温碱液中NaClO_3杂质浓度对1Cr18Ni9Ti耐蚀性的影响
Influence of Aging on Corrosion Properties of ZK60 Magnesium Alloy in Cl-Alkaline Solution
时效对ZK60镁合金在含Cl-碱液中腐蚀性能的影响
Preparation of efficient solid anti-scaling corrosion inhibitor based on the characteristics of corrosion and fouling in weak base alkaline-surfactant-polymer flooding
弱碱三元复合驱采出液腐蚀与结垢特性及固体缓蚀阻垢剂研制
The result of study indicated that the electrolytic method can remove copper ions of the alkali ammonia etching wastewater effectively, and reclaim metal copper.
研究结果表明,电解法能够有效地去除碱氨蚀刻废水中的铜离子,并可以回收金属铜。