Influence of tempering on microstructure of FeCoV alloy deformed by equal channel angular pressing;
回火对等通道角变形FeCoV合金组织的影响
Development of Tempering Process of Die Steel in Car Bottom Heat Treatment Furnace;
模具钢车底式炉回火的工艺开发
Effect of cold deformation and tempering on ductility of low carbon martensite steel;
冷变形低碳马氏体钢的回火塑性
Study on Tempered Heat Treatment Microstructure and Properties of ZG30CrMn2Si2 Mo Cast Steel;
新型贝氏体铸钢回火热处理组织和性能的研究
Quench-temper Process Research of H13 and DFD Steel Wire;
H13和DFD钢丝的淬火—回火工艺研究
The effect of tempering temperatures on fatigue damage characteristics of 40Cr steel;
回火温度对40Cr钢疲劳损伤特性的影响
It has been investigated that the process of annealing influences the properties of carbides,and that the precipitated phase separated from supersaturated solid solution.
研究了回火工艺对热处理产品的影响,系统地分析了回火时过饱和固溶体的析出物,从而制定合适的回火工艺。
Annealing at a moderate temperature can make up for these above disadvantages.
合金在适当温度下回火可弥补以上不足。
It was found that after high vacuum annealing, the density, maximum energy product and remanence of magnets become lower.
为研究回火过程中真空度对烧结NdFeB磁体显微结构及磁性能的影响,对烧结态磁体采用不同的真空度进行回火。
Causes for Flashback of PQZ-T Combustor and Preventive Measures;
PQZ-T燃烧器的回火原因与预防措施
Numerical Simulation on the Flashback Character for Lean Premixed Combustion;
贫燃料预混燃烧回火特性数值模拟
Oxygen/fuel flashback arrester is a necessary safety apparatus during oxygen-fuel cutting, gas welding, iron and steel casting, and is widely applied in the transportation pipe, gas cutting and gas welding.
氧气、燃气回火防止器是氧-燃气气割、气焊、钢铁连铸等热加工过程中必备的劳动安全防护装置,在氧气和燃气输送管道、气割、气焊中大量使用。
Calculation of Anti-Backfire Design for Burner of Side Wall in Hydrogen Production Transformation Furnace;
制氢转化炉附墙燃烧器防回火设计计算
It was shown that in the smooth tubes without any obstacle, with the increasing intake speed, the area of backfire widened and the air-fuel ratio needed decreased; there are no significant changes in location of backfire region and of the air-fuel ratio with.
实验表明,在小当量比情况下,在没有障碍物的光管中,随着进气速度的增加,点火所需要的当量比逐渐减小,回火区域逐渐增大。
To solve the backfire problems which we often meet in the process of boiler gas burner design, we found out some backfire resolving methods based on the structural reasons.
针对锅炉燃气燃烧器中易出现的回火问题，根据燃烧学的基本原理，采用有限元软件分析方法，分析了回火原因，提出了解决方案，并将其应用于实际的燃烧器产品的结构设计中。
One of the reason is gas flash back.
从彩釉钢化玻璃面板的特性和家用燃气灶具燃烧方式的原理分析,可以认为燃气回火是导致爆裂的重要原因。
The solution of flash back is important to the application of gas infrared ceramic cooker.
解决回火问题是完全预混式多孔陶瓷板燃气红外灶推广应用的关键。
Low & High Temperature Tempering
回火有低温回火及高温回火
continuous quench and temper line
淬火回火连续作业线
Three . They are hardening, temper and anneal .
三种。 它们是淬火、回火和退火。
Three:they are hardening,temper and anneal.
三个过程：它们是淬火、回火和退火。
What does temper mean ?
回火是什么意思呢?
temper-stressed steel
(为)去除应力(而)回火(的)钢
cornflower blue
矢车菊色,浅蓝色(回火色)
Temper process of 36NiCrMo16 alloy steel
36NiCrMo16合金钢的回火处理
Development of HTΦ0.96mm tempered bead wire
HTΦ0.96mm回火胎圈钢丝的开发
Reason anlaysis on backfire in gas burner in primary reformer and countermeasures
一段炉燃气火嘴回火原因分析及改进
A brief introduction to quenching-partitioning-tempering (Q-P-T) process
淬火-碳分配-回火(Q-P-T)工艺浅介
There are three main operations in the heat treatment of steel: hardening, tempering and annealing.
钢的热处理操作主要有三种，即：淬火，回火和退火。
Investigation of Compression Mechanic Behavior of HSS in Quenching and Annealing
高速钢淬火回火状态的压缩力学性能研究
The procedures of heat treatment of steel include hardening,tempering,annealing and case hardening.
钢的热处理工序包括硬化、回火、退火和表面硬化。
Tempering softening of overlapping zones during multi-track laser quenching for carbon steel and alloy steel
碳钢及合金钢搭接激光淬火回火软化特征
To spring back, as upon firing.
弹回，跳回弹回，如因开火而弹回
He came back by rail.
他是乘火车回来的。
That morning the train started back to Shenyang.
这天早上火车返回沈阳。