Effects of Slope Plate Length on Semi-solid Microstructure of Hypereutectic High Cr Cast Iron;
倾斜板长度对过共晶高铬铸铁半固态组织的影响
Microstructural Homogeneity in Hypereutectic High Cr Cast Iron by Semi-solid Rheo-extrusion
半固态流变挤压过共晶高铬铸铁组织均匀性分析
Primary carbide microstructure evolution in the semi-solid hypereutectic high Cr cast iron has been studied at partial remelting temperature.
研究了半固态过共晶高铬铸铁坯料部分重熔保温过程中初生碳化物的演变规律。
Solidification Microstructure of Hypereutectic High Chromium Cast Iron Semi-solid Slurry in Centrifugal Casting;
半固态过共晶高铬铸铁浆料在离心力作用下的凝固组织
Effects of Extrusion Pressure on Internal Quality of Semi-solid Hypereutectic High Chromium Cast Iron Extrusion Parts
挤压力对过共晶高铬铸铁半固态挤压件内部质量的影响
To investigate the effect of thixo-remelting time on the morphologies of initial carbides,semi-(solid) billets of Cr17 hypereutectic high chromium cast iron were partially remelted at 1 270 ℃ for four (distinct) periods (5 min, 15 min, 25 min, and 30 min, respectively),and the shape factor and grain factor of carbide grains were characterized quantitatively via a Leica image analyzer.
为考察触变重熔时间对初生碳化物形貌的影响,对Cr17过共晶高铬铸铁半固态坯料在1 270 ℃进行了部分重熔,重熔时间分别为5、15、25和30 min,并借助Leica图像分析仪分别定量描述了碳化物形状因子及粒度因子的变化规律。
Effect of Cerium on As-cast Microstructure of Hypereutectic High Chromium Cast Iron
稀土铈孕育对过共晶高铬铸铁铸态组织的影响
Fabrication and Extrusion of Semi-solid Slurry of Hypereutectic High Cr Cast Iron;
过共晶高铬铸铁半固态浆料制备及挤压成形
Microstructure and Properties of Semi-Solid Forming Hypereutectic High Chromium Cast Iron
过共晶高铬铸铁半固态成形组织和性能
Effects of Extrusion Pressure on Internal Quality of Semi-solid Hypereutectic High Chromium Cast Iron Extrusion Parts
挤压力对过共晶高铬铸铁半固态挤压件内部质量的影响
Microstructural Homogeneity in Hypereutectic High Cr Cast Iron by Semi-solid Rheo-extrusion
半固态流变挤压过共晶高铬铸铁组织均匀性分析
Fabrication and Extrusion of Semi-solid Slurry of Hypoeutectic High Chromium Cast Iron;
亚共晶高铬铸铁半固态浆料制备及挤压成形
Study on Abrasion Resistance of the Columnar Grain Zone in High Cr Cast Iron
铸态高铬铸铁柱状晶粒区耐磨性研究
Eutectic composition should be adopted for high-Cr white cast iron used under high-stress impact abrasion condition.
高应力冲击磨料磨损时，高铬白口铸铁应选共晶成分。
Influence of Pouring Temperature on Primary Austenite in Semi-solid Hypoeutectic High Chromium Cast Iron
浇注温度对半固态亚共晶高铬铸铁初生奥氏体的影响
RESEARCH ON THE FORGEABILITY OF HIGH CHROMIUM CAST IRON AND THE INFLUENCE OF FORGING PROCESS ON MECHANICAL PROPERTIES
高铬铸铁可锻性及锻造过程对机械性能的影响
A Test Study on Cr24VTi High-chromium Cast Iron Grinding Ball
含钒钛24%铬高铬铸铁磨球试验研究
Investigation of Refinement Means for Microstructure of Hypereutectic Al-Fe Casting Alloys;
过共晶铝铁合金铸态组织细化途径的探讨
Effect of Manganese on austenite cooling transformation of high Chromium cast iron is investigated.
研究了锰对高铬铸铁奥氏体冷却转变过程的影响。
Study on Forming Mechanism and Morphological Characteristics of Carbides during the Solidification of High Chromium Cast Irons;
高铬铸铁凝固过程中碳化物形成机制及形态特征研究
The Influence of Quenching Medium on Grinding-ball Properties of High Chromium Cast Iron
淬火介质对高铬铸铁磨球性能的影响
A Study on Properties of Low Thermal Expansion High Nickel Cast Iron Containing 2％Cr
含2％铬的高镍低膨胀铸铁性能的研究
The Influence of Tungsten on Microstructure and Properties of Cr20 High Chromium Cast Iron
钨对Cr20高铬铸铁组织及性能的影响
Application of Alloy High-Chromium Cast Iron to the Drill Bit of Furnace Breaker
合金高铬铸铁在拆炉机钻具中的应用