Effect of fiber surface treatment on the microstructure and mechanical properties of mesophase pitch-based C/C composites;
纤维表面处理对C/C复合材料组织与性能的影响
Influence of NiTi alloy fiber surface treatment on shear strength of resin matrix composites;
NiTi合金纤维表面处理对树脂基复合材料界面剪切性能的影响
Effect of surface treatment methods on properties of adhesive;
表面处理方法对胶粘剂性能的影响
Continuous surface modification of UHMWPE fibers;
连续表面处理超高分子量聚乙烯纤维的研究
Experimental research on surface modification by EDM through TiC semi-sintered electrode;
利用TiC半烧结体电极进行电火花表面处理的实验研究
Synthesis of addition liquid vinylsiloxane rubberⅡ.Influence of surface modification of fumed silica on properties of silicone rubber;
加成型液体乙烯基硅橡胶的研制 Ⅱ.白炭黑表面处理对硅橡胶性能的影响
CE modified by nano-SiC with KH-560 and SEA-171 as surface treating agent
KH-560和SEA-171表面处理纳米SiC改性氰酸酯树脂
Effect of surface treating technology in improving the quality of mould was introduced in brief.
简要地概述了表面处理技术在提高模具质量中的作用,按物理表面处理法、化学表面处理法和表面覆层处理法对模具表面处理技术进行了综述。
The results also show the differences of influence between two kinds of surface treating on the initial combustion.
通过30mm短管炮内弹道试验和点火模拟装置试验,研究了钝感与包覆两种不同表面处理工艺的叠氮硝胺发射药膛内起始燃烧性能。
EIS study of multilayer organic coatings on steel with different surface pretreatments;
不同表面处理条件下复合涂层体系失效过程的EIS特征
Effect of fiber surface pretreatment on the performances of carbon/glass hybrid fiber reinforced sealing composite materials;
表面处理对玻纤/碳纤增强橡胶基密封复合材料性能的影响
Improving on Surface pretreatment of Assembling Capacitor;
集合式电容器表面处理的质量改进
surface processing+composite rolling+heat treatment were carried out.
进行了钢-铜、钢-铝冷轧复合实验,即表面处理+复合轧制+轧后热处理。
The effects of additives and surface processing on halogenation frosting are further studied.
本文介绍了镁胶凝材料制品在使用过程中容易产生的返卤泛霜现象形成的原因,测试方法,通过加入外加剂进行改性,并进一步探讨了调和剂、外加剂和表面处理对返卤泛霜的影响。
It illustrates anti-corrosive measures of steel structure,summarizes installation of steel structure and its check examination,and discusses method of surface processing before painting,which to improve quality of steel structure and competition of enterprise.
阐述了钢结构的防腐蚀措施,总结了钢结构的安装要点及钢结构的验收,探讨了涂漆前表面处理的方法,以提高钢结构产品的质量,从而增强企业竞争力。
grafting and coatings methods, the interfacial shear strengths of polyimide (PI) resin composites reinforced with carbon fiber after different surface treatments are checked by microdebonding method and the interfacial thickness is measured by TEM through a compute.
在基体和成型工艺一定的条件下，炭纤维（CF）的表面状态决定了复合材料的界面性质通过空气冷等离子体处理、表面接技NA-酸酐和表面徐没涂层的方法对炭纤维进行表面改性：采用界面微脱粘测试技术表征不同表面处理方法对炭纤维／聚酰亚胶树脂复合材料界面剪切强度的影响；并应用TEM和图像处理技术对其界面进行直观表正计算出不同界面层厚
Based on experimental study,the effect of different surface treatments with bush alloy on friction-wear properties and the performance of slidling bearings was discussed.
从试验的角度 ,探讨和分析轴瓦合金在不同的表面处理方式下的摩擦磨损特性以及对滑动轴承性能可能产生的影响。
non-polluting surface finishing technology
不污染的表面处理技术
metal finishing laboratory
金属表面处理实验室
bitumen slip coating
沥青滑泻表面处理涂层
rotary table type surface treatment machine
回转盘式表面处理机
The Application of IGBT in the Plastic Superficial Treatment;
IGBT在表面处理方面的应用实践
Surface Techniques Handling Cement Concrete Pavement
水泥混凝土路面的表面处理技术研究
Study on the Interaction Mechanism of Laser Surface Treatment of Materials;
激光对材料表面处理的作用机理研究
Surface Treatment of Automobile Parts by Using QPQ Complex Salt Bath
汽车零件表面改性的QPQ复合表面处理技术研究
Study on the Properties of Corrugated Medium by Surface Treatment of Cellulose Fibers and Surface Sizing;
纤维表面处理及成纸表面处理改善瓦楞原纸性能的研究
A brief review of surface treatment of carbon fibre ispresented, with focus on electrochemical oxidation of carbon fibre surface.
综述了碳纤维的表面处理的方法，特别介绍了电化学氧化表面处理，碳纤维表面的化学表征。
external [coating] polymer
[羊毛纤维]表面处理聚合物
Product Finishing and Environmental Control Exhibition
产品表面处理及环境污染控制展览会
A new surface treatment technology named chemical nickel plating is presented.
介绍了表面处理新技术—化学镀镍。
isothernal transformation case hardening
等温转变表面硬化处理
carbonized roll
表面经碳化处理的辊子
To treat(a metal surface)with cyanide to produce a hard surface.
氰化用氰化物处理（金属表面）使其表面坚硬
International Federation for Heat Treatment and Surface Engineering
国际热处理和表面技术学会(热处理学会)
Corona Treatment and Flame Treatment on the Surface of Plastics Packaging Material
塑料包装材料表面的电晕处理与火焰处理