Oil lift system of thrust bearing of generating unit in Three Gorges;
三峡机组推力轴承高压油顶起系统
The Reason and Solution to the Oil Flinging and Infiltrating of Generator Thrust Bearing;
发电机推力轴承甩、渗油原因及处理
The methods for measurement of lubricant film Thickness of thrust bearing;
推力轴承油膜厚度测量方法概述
The PNF method for investigating the bifurcation of the periodic solution of the system is used to study the thermal stability of thrust bearings.
建立了考虑瞬态油膜压力影响的热稳定性分析模型 ,用求解系统周期解分岔的 PNF法对推力轴承系统的热稳定性进行了研究 ,结合 Poincare映射与胞映射法思想 ,提出了用于分析系统周期稳态解全局特性的数值计算 PCM方法 ,并对推力轴承热系统周期稳态解的全局特性进行了考
It was theoretically proven that thermal instability exists during operations for thrust bearings based on an infinitely wide thrust bearing.
以简化推力轴承为对象 ,理论上证明了推力轴承运行时存在热不稳定性 ,采用小扰动分析法得到了油膜温度的扰动方程 ,应用简正模态分析法推导了无量纲热不稳定性准则数以及推力轴承运行的热不稳定性准则 。
The three dimensional modeling for sector shaped tilting pad thrust bearings with polytetrafluoroethylene plastic pads and a numerical simulation with finite element method are presented.
通过建立水电机组分块可倾瓦推力轴承热弹流动力润滑数值模型 ,利用有限元法联立求解三维控制方程组 ,给出了准确的推力轴承润滑分析方法 。
Contact simulation on thrust ball bearing based on ANSYS
基于ANSYS的推力球轴承的接触仿真
A numerical analysis on contact,which is between bearing balls and raceway of seat washer and shaft washer s,of thrust ball bearing is conducted in this paper,so as to provide reliable reference and reasonable guidance for further design optimization and structure improvement.
本文采用ANSYS对某型号推力球轴承的滚珠与座圈、轴圈的滚道之间的接触问题进行了数值分析,为进一步的优化设计、改进结构提供可靠的参考依据。
The contact shape,size and stress of thrust ball bearings are calculated by finite software ANSYS and Hertz s contact theory in the contact area respectively.
用ANSYS和Hertz接触理论分别对推力球轴承的接触面形状和尺寸、接触应力进行了计算。
Rolling bearings--Thrust ball bearings--Tolerances
GB/T307.4-1994滚动轴承推力球轴承公差
Rolling bearings--Thrust ball bearings--Boundary dimensions
GB/T301-1995滚动轴承推力球轴承外形尺寸
Rolling bearings--Cylindrical thrust roller bearings--Boundary dimensions
GB/T4663-1994滚动轴承推力圆柱滚子轴承外形尺寸
" Rolling bearings--Thrust bearings--Boundary dimensions,general plan"
GB/T273.2-1998滚动轴承推力轴承外形尺寸总方案
rubber vibration isolators for journal bearing thrust bearers of railway rolling stock
铁路车辆车轴轴承推力支承用振动隔绝橡胶
Rolling bearings--Self-aligning thrust roller bearings--Boundary dimensions
GB/T5859-1994滚动轴承推力调心滚子轴承外形尺寸
radial Bearing and thrust Bearing
横力轴承与推力轴承
Kingsbury thrust bearing
单环平衡式推力轴承单圈推力轴承
double-row single-direction thrust ball bearing
双排单向推力球轴承
Four point contract center-oriented thrust Ball bearing
四点接触向心推力轴承
multi-row radical thrust ball bearing
多列向心推力球轴承
single row angular contact ball bearing
单列向心推力球轴承
Increasing total load-carring area of thrust blok in the thrust bearing, increasing cooling area, the load-carring ability has been improved
通过增加推力轴承的推力块总承压面积，增加冷却面积，提高了推力轴承的承载能力
Force Analysis of Multi-serial Thrust Bearing Based on ANSYS
基于ANSYS的多排推力轴承受力分析
The double direction angular contact thrust ball bearings are suitable for machine tool spindles , while the single are used to support ball screws .
双向推力角接触球轴承适用于机床主轴，单向推力角接触球轴承适用于丝杠支承。
Before using they have to be preloaded.
推力球轴承在工作中必须加以轴向予紧。
a bearing designed to take thrusts parallel to the axis of revolution.
设计成可以利用与旋转轴平行的推力的轴承。
Spherical plain thrust bearings-Boundary dimensions
GB/T9162-1990推力关节轴承外形尺寸