Along a line of“applications of processed fiberglass products→requirements of these products for sizing agents→sizing agents used for these products”,this paper reveals the importance of single-purpose sizing agents in the system engineering of developing processed fiberglass products and introduces various types of sizing agents corresponding to various fiberglass products.
以玻纤深加工制品的应用领域—玻纤深加工制品对浸润剂的要求—用于玻纤深加工制品的浸润剂简介为线索,展示了玻纤深加工制品开发系统工程中专用浸润剂研发的重要性, 并结合深加工产品对适用的各类浸润剂分类介绍。
In order to reduce the ratio of emulsifier to the film former for sizing agent and increase the bonding strength between glass fibers and resin matrix,emulsions with small amount of emulsifier were produced by using high pressure homogenizing machine in emulsion processing.
为了减少乳化剂在浸润剂成膜剂中的使用比例,达到玻璃纤维与树脂基体有更高的结合强度这一要求,通过高压均质机在乳液处理过程中的使用,生产出了仅使用少量乳化剂的乳液。
This paper investigates the effects of different filament diameters and different sizing agents on the properties of high strength glass fibers drawn from 400-hole bushings and the composites made therefrom.
本文研究了不同直径系列及不同增强环氧型浸润剂系列对400孔高强度玻璃纤维及其复合材料性能的影响关系。
The effect of the size on the knittability of glass fibre is discussed in this paper.
探讨了玻璃纤维所用浸润剂组分以及各组分含量的差异,对玻璃纤维纱线各项有关其可编织性的物理机械性能的影响。
In this paper, the causes of size migration and its effects on chopped strand mats are analyzed from aspects of raw material selection, fiber drawing process and fiber drying process.
本文从浸润剂原材料的选择、拉丝工艺和烘干工艺三方面分析了浸润剂迁移现象产生的原因及其对短切毡的影响。
Development of S-a size and its applied properties studied through three ways were introduced in this article, through which several conclusive remarks can be obtained.
简述了S-1浸润剂的研制过程,从3方面对其应用性能进行研究。
This is size migration.
这就是浸润剂的迁移。
Aqueous Polyester Plasticizer Dedicated for Sizing and Binding Agents
浸润剂、粘结剂专用水溶性聚酯增塑剂
Development of Dedicated Film-former in Sizing Agent for SMC Rovings
通用型SMC浸润剂专用成膜剂的研制
Such a treatment is correctly called a size.
此种处理确切地称为浸润剂处理。
Study on a New Type of Glass Fibers Sizing for SMC;
SMC用玻璃纤维新型浸润剂的研究
Control of the Treating Compound Preparation Process
玻璃纤维浸润剂配制控制系统的设计
PLC-based Intelligent Control System for Sizing Agent Production Process
基于PLC的浸润剂工艺智能控制系统
Study on the Automation System for Soak Agent Based on Two-tire Network
基于两层网络的浸润剂自动化系统的研究
Design and Implementation for Soak-agent Management System Based on .NET Platform
基于.NET的浸润剂生产管理系统的设计与实现
Parafin was emulsion is used to humidify when the fiberglass is produced.
拉制玻璃纤维原纱时采用石蜡乳剂作浸润剂，其含量不大于2.2%。
A sizing is applied to the filaments just before they are gathered into a strand.
在这些单丝快要集束成一股之前，在单丝上加上浸润剂。
The successful application of the size and of resin depends on the successful elimination of air.
施加浸润剂和施加树脂的成功取决于充分排除空气。
Study on Dimension and Shape of Ultra-fine E-glass Fiber and Characterization & Evaluation of Sizing Agent
超细电子玻璃纤维几何形态及浸润剂性能表征与评价体系研究
immersion rod method
棒浸没法(测试助剂润湿性方法)
Surface active agents-Determination of wetting power by immersion
GB/T11983-1989表面活性剂润湿力的测定浸没法
The first requirement for any adhesive bond is that the adhesive most wet the substrate.
对所有粘结剂粘结的首先要求，就是必须能浸润基材。
Clinical Study of CPD_4-PDT for the Prevention of Postoperative Recurrence in Infiltrative Bladder Cancer
叶绿素光敏剂光动力疗法预防浸润性膀胱癌术后复发的临床研究
Of spill or leak: flood with water to polymerize. Soak up with an inert absorbent.
产品外溅或泄露的措施：用水冲使其聚合。用惰性吸收剂浸润。