The results showed that broken-up,occurred on the combined zone between grit and matrix,was the main wear mechanism for brazed diamond grits.
钎焊金刚石磨粒的出露高度越高,磨粒所承受的弯矩越大,弯矩增加以及工件对磨粒的剪切力是导致金刚石磨粒产生结合部破碎的主要原因。
Change characteristics of grinding forces during marble grinding with brazed diamond grinding wheel;
钎焊金刚石砂轮磨削大理石的力的变化特征
In this paper,grinding forces were measured in the grinding of granite with a high-frequency induc- tion brazed diamond grinding wheel.
通过测量高频感应钎焊金刚石砂轮磨削花岗石过程中的磨削力,对砂轮所受的法向力和切向力进行了研究。
In this paper,grinding forces were measured in the grinding of granite with a high-frequency induction brazed diamond grinding wheel.
本文通过测量不同金刚石粒度的高频感应钎焊金刚石砂轮磨削花岗石过程中的磨削力,对砂轮所受的法向力和切向力进行了研究。
The paper described the grain damage characteristics of brazed diamond quill and electroplated diamond quill,and discussed their relations to normal grinding force during face grinding of the granites.
研究了钎焊金刚石磨盘和电镀金刚石磨盘磨削花岗岩的磨粒损伤形式及其与法向磨削力之间的相互关系。
Studies on Brazing Diamond with Ni-Fe Filler Metal;
Ni-Fe二元系合金钎焊金刚石的研究
Study on Preparation and Brazing Diamond Film of Active Coated Brazing Filler Metal;
活性涂层钎料的制备及其钎焊金刚石膜的研究
The Mechanism Research on Laser Brazing of Diamond Grits;
激光钎焊金刚石磨粒工艺及机理研究
Experimental Study on Surface Grinding with Brazed Diamond Tools;
钎焊金刚石工具平面磨削的实验研究
Residual Stress Field Analysis of Monolayer Brazed Diamond Tools;
单层钎焊金刚石工具的残余应力分析
Surface graphitization on brazed diamond with Ni-Cr alloy in vacuum brazing
Ni-Cr合金真空钎焊金刚石的表面石墨化
Wear Characteristics of Induction Brazing Diamond during the Grinding of Stone
石材磨削中感应钎焊金刚石磨损特征研究
Experiment Investigation of the Diamond Grits Damage Mechanism by Laser Brazing;
激光钎焊金刚石颗粒损伤机理的实验研究
Experimental Investigation on the Drilling of Brittle Materials with Brazed Diamond Grains;
钎焊金刚石磨粒钻削脆性材料的实验研究
Current research situation and development of manufacturing vacuum brazed diamond tools
钎焊金刚石工具制备的研究现状和进展
Interface Microstructure and Thermal Stress of Diamond Brazing with Ag-Cu-Ti Filler
Ag-Cu-Ti钎焊金刚石的界面结构及热应力分析
Study on the relationship between microtopography of brazed diamond and the abrasion of grinding grains
钎焊金刚石微观形貌与磨粒磨损状态关系研究
Delaminating Behavior and Formation Mechanism of the Interfacial Microstructure in the Laser Brazing Diamond with Ni-Cr Alloys
Ni基钎料激光钎焊金刚石磨粒界面显微结构及形成机理
Brazing of Diamond Abrasive Processing Stone Wear and Technological Parameters Optimization
钎焊金刚石磨具加工石材的磨损和工艺参数优化
Test and Study on Cutting Parameter in Processing Stone with Braze Welding Diamond Sharper
钎焊金刚石磨具加工石材时切削参数的试验研究
Study on the Brazing of Diamond Compact and Cemented Carbide
金刚石复合片与硬质合金的钎焊研究
Study on the Hi-frequency Induction Brazing of Diamond Tools
金刚石刀具高频感应钎焊工艺的研究
Experimental Investigation on Grinding Engineering Ceramics with Brazed Diamond Abrasive Wheel;
金刚石钎焊砂轮磨削工程陶瓷的试验研究