Effects of Sr substitution amount on PMNS-PZT piezoelectric ceramics;
Sr取代量对PMNS-PZT压电陶瓷的影响
Progress in fabrication and properties of LiTaO_3 matrix piezoelectric ceramics;
LiTaO_3基压电陶瓷的制备与性能研究进展
The Current Progress of BNT Lead-free Piezoelectric Ceramics;
Bi_91/2)Na_(1/2)TiO_3无铅压电陶瓷的研究进展
Research on linearization of piezoelectric ceramic actuator based on virtual instrument;
基于虚拟仪器的压电陶瓷线性化研究
Using ANSYS to analyze the vibration state of piezoelectric ceramic;
用ANSYS软件分析压电陶瓷的振动状态
The Hardware and Software Implement for Micro-feed Platform and Control System Based on PZT;
基于压电陶瓷的微进给工作台及其控制系统的软硬件实现
A Controller of Micro-Positioning System Using PZT for Ultra-precision Grinding;
面向超精密磨削的压电陶瓷驱动微进给控制系统
A controller of micro-positioning system using PZT for ultra-precision machining;
面向超精密加工的压电陶瓷驱动微进给系统的控制实现
Computer Correction for Distorted STM Images Caused by Piezoceramics;
压电陶瓷对STM图像的影响及计算机校正
Design of Piezoceramics Micro-Gripper of Robot;
机器人压电陶瓷微操作手的设计
The piezoceramics transducer can be used in the broaching of ultrasonic waveguide.
针对波导管内壁的加工,提出了波导内腔超声推挤原理和装置,采用了具有频率自动跟踪系统的超声波发生器,自行设计了用于波导内腔超声推挤的压电陶瓷换能器,并设计给出了变幅杆———推刀振动子系统的谐振频率、位移节点、放大倍数等计算公式,测出了声学系统的电导———电纳特性,并进行了工艺试验,探讨了超声推挤过程。
Damping characteristics of piezoceramics shunted by various types of electrical circuits;
压电陶瓷片与多种电路机电耦合的阻尼特性
Study on preparation and operating process of high sintering temperature silver paste for piezoceramic vibrator use;
压电陶瓷振子专用高温银浆的制备及工艺研究
Inverse control algorithm to compensate the hysteresis and creep effect of piezoceramic;
补偿压电陶瓷迟滞和蠕变的逆控制算法
Research and Design on Piezoceramics Electronic Jacquard Machine;
为了减少电子提花机的能耗,提高其稳定性,介绍了使用压电陶瓷片代替电磁铁作为电子提花机组件内核进行选针控制的工作原理,并详细论述了步进电机驱动方式和控制系统的组成和原理。
ceramic pick-up
压电陶瓷拾音器钛酸钡陶瓷传感器
complex perouskite type piezoelectric ceramics
复合钙钛矿型压电陶瓷
temperature stability
温度稳定性-压电陶瓷的
lead zirconate-titanate piezoelectric ceramics
锆-钛酸铅压电陶瓷
Study on Piezoceramics with High Dielectric and High Piezoelectric Coefficient;
高介电、高压电常数压电陶瓷的研究
Research and Development of Toughening of Ceramic Matrix Composites by Piezoelectric Ceramic Particles
压电陶瓷颗粒增韧陶瓷基复合材料研究进展
Studies on the Fabrication and Properties of BNBKT Piezoelectric Ceramic;
BNBKT压电陶瓷制备及压电性能研究
Piezoelectric ceramic resonators for use in electronic equipment-Sectional specification for piezoelectric ceramic resonators for low frequency
GB/T12860-1991电子设备用压电陶瓷谐振器分规范低频压电陶瓷谐振器
Study on (Bi_(0.5)Na_(0.5)TiO_3-based and High Temperature Aurivillius Phase Lead-free Piezoceramics;
钛酸铋钠无铅压电陶瓷与高温铋层无铅压电陶瓷探索
Vocabulary for ferroelectric and piezoelectric ceramics
GB/T3389.1-1996铁电压电陶瓷词汇
A New Power Supply for Piezoelectric Ceramic Based on PA85;
基于PA85的新型压电陶瓷驱动电源
Research on High-Precision Dynamic Piezoelectric Ceramic Driving Power
高精度动态压电陶瓷驱动电源的研究
Design and Property of a Square Cylinder Type Piezoelectric Ultrasonic Micromotor
小型方柱压电陶瓷电机的设计及性能
Development of a Driving Power based on MC34063 for Piezoelectric Ceramic Motors
基于MC34063控制的压电陶瓷泵电源研制
Preparation of power doped BTO-based piezoelectric ceramic and its dielectric properties
掺杂BTO基压电陶瓷制备及介电性能
Study on the Dielectric Behavior of Bi(Mg_(2/3)Nb_(1/3))O_3 Doped Na_(1/2)Bi_(1/2)TiO_3 Piezoelectric Ceramics
BMN掺杂NBT压电陶瓷的介电特性研究
Design of piezoelectric power generator in tire
压电陶瓷轮胎发电机的设计(英文)
Physical Properties of CaCu_3Ti_4O_(12)-based High-dielectric Ceramics and BaTiO_3 Piezoelectric Ceramics
钛酸铜钙基高介电陶瓷材料和钛酸钡压电陶瓷材料的物性研究