Vacuum electron beam welding of SiC particle reinforced aluminum matrix composites;
SiC颗粒增强铝基复合材料的真空电子束焊接
In this paper we describe the quality of 2A12 aluminum alloy and applied range and the welding procedure of the vacuum electron beam welding and the development of the vacuum electron beam welding technology.
本文研究了2A12铝合金材料的性能,探讨了真空电子束焊接技术的应用范围和焊接流程以及真空电子束焊接工艺的发展。
The necessity and reasonableness of vacuum electron beam welding used for one-piece cylinder welding was expounded,and the market future of one-piece cylinder was analysed and prospected.
描述了7FDL柴油机部件一体式气缸的结构特点,介绍了该产品的研发过程和制造工艺,详细阐述了将真空电子束焊接用于组焊的必要性与合理性,分析并展望了一体式气缸的市场前景。
TC4 Ti alloy is welded using vacuum electron beam welding,microstructure and fractography is observed by means of optical metallography and scanning electron microscope,and microhardness test and impact experiment are conducted.
采用真空电子束焊方法进行TC4钛合金的焊接,借助OM、SEM设备观察焊缝金属显微组织和断口形貌,测试了焊接接头硬度并进行了冲击试验,分析了焊接接头性能、显微组织及焊缝中气孔的形成。
In this paper, 8mm aluminum alloy cylindrical vacuum electron beam welding technology is researched and every welding parameter area features are analyzed.
研究了8mm厚某铝合金圆筒真空电子束对接焊接工艺,分析了各个焊接规范参数特征区域的特征,探讨了特征参数与接头性能之间的对应关系,并通过一系列工艺试验,得出了该铝合金筒真空电子束焊对接的最佳焊接规范参数。
During vacuum electron beam brazing (VEBB) of stainless steel with BNi-2 filler metal and manganese-base filler metal, the effects of VEBB processing parameters on wettability of filler metals and temperature field of workpieces are discussed.
探讨了在BNi -2钎料和锰基 7#合金两种钎料的不锈钢真空电子束钎焊过程中 ,真空电子束钎焊工艺参数对钎料润湿性和试板温度场的影响作用。
The application of CPM2A series PLC in the EBW system;
OMRON PLC在真空电子束焊机中的应用
The procedure in the paper was suit to the electron beam welding for domestic lower tin Zr-4 alloy.
试验表明 ,适当降低焊接时的能量输入 ,并使聚焦、散焦合理搭配 ,从而减少电子束焊接环缝时合金元素的蒸发 ,这种真空电子束焊接工艺适合国产低锡Zr -4合金。
Electron beam welding of dissimilar high temperature titanium alloy Ti55 and Ti60
高温钛合金Ti55/Ti60真空电子束焊接
Precision Shunt Resistor with its Techniques of Electron-beam Welding
精密分流电阻器及真空电子束焊接工艺
Research status analysis of electron beam welding for joining of dissimilar materials
异种材料真空电子束焊接研究现状分析
Numerical simulation on temperature field of electron beam welding of AZ61 magnesium alloy
AZ61镁合金真空电子束焊接温度场数值模拟
Hollow electronic beam welding can solve the difficult problems of the aluminium alloy' s welding.
真空电子束焊接独特的优点可以解决铝合金的焊接难题。
Study of Vacuum Electron Beam Welding Test for Stationary Blade Carrier of Gas Turbine Compressor;
燃气轮机压气机静叶环真空电子束焊接工艺试验研究
Numerical Simulation and Control of Titanium Alloy Welding Deformation by Vacuum Electron Beam Welding
钛合金筒件真空电子束焊接变形数值模拟及控制
The Study of Electron Beam Welding Process for AZ61 Magnesium Alloy and Its Numerical Simulation of Temperature Field
AZ61镁合金真空电子束焊接工艺及其温度场数值模拟研究
Research on the Vacuum Electron Beam Welding Process for HP and IP Diaphragm of Ultra-Supercritical Steam Turbine
超超临界机组高中压隔板真空电子束焊接工艺研究
Performance Research on Vacuum Destressing Annealing of TC4 Electron Beam Welded Joint
TC4钛合金电子束焊接接头的真空去应力退火工艺研究
Here, the electon beam welding (EBW) method is tested for manufacturing fuel rods.
电子束焊是一种在高真空中进行的机械熔化焊方法,特别适用于燃料棒的焊接。
Research on PdNb Alloy Brazing Material Used for Cathode Welding of Vacuum Electron Devices
真空电子器件阴极焊接用PdNb合金钎焊料的研制
Design of NC Motion System of Large Vacuum EBW Machine
大型真空电子束焊机数控运动系统的设计
Automatical EB Welding of Curved Weldment
工件平面曲线焊缝的电子束自动焊接
Microstructure and mechanical properties of electron beam welded dissimilar TiAl/Ti60 joint
TiAl/Ti60电子束焊接接头组织及性能
Joint microstructures of magnesium alloy for electron beam welding
镁合金电子束焊接接头微观组织特征
Study on Welding Principle of EBW and Welding Procedure for ZTC4 EBW;
ZTC4钛合金电子束焊接机理及焊接工艺研究
Design of electrostatic foc using system of the space electron beam gun
空间用电子束焊枪电聚焦问题的研究