Simple method of precise measurement for single-adapted helical cylindrical gear;
单一斜齿圆柱齿轮精确测量的简便方法
When hobbing helical cylindrical gear which has a smaller or bigger spiral angle,a relatively small or big gear ratio is gotten by using common differential calculating formula of hobbing helical cylindrical gear.
当滚切螺旋角很小或很大的斜齿圆柱齿轮时,用普通滚切斜齿圆柱齿轮的差动计算式所得传动比过小或过大,造成无法选择挂轮或不能正常加工。
The simple method of the precise measurement to single-adapted helical cylindrical gear was presented.
介绍了精确测绘单一斜齿圆柱齿轮齿形参数的简便方法,即测量公法线长度计算基圆齿距从而查表确定模数和压力角;测量齿顶圆直径估算分度圆螺旋角,用分度头在铣床上修正分度圆螺旋角,并进行误差分析。
Coincidence coefficient of helical gear transimission;
斜齿圆柱齿轮传动的重合度系数
A method of precision forging process for helical gear is developed according to the structure of movable die,in which the upper punch and the die with teeth move down at the same time.
本文在浮动凹模原理的基础上,提出了数控齿形凹模和冲头联动的斜齿圆柱齿轮的数控动模精锻工艺。
Fuzzy reliability optimum design of cylindrical helical gear drive;
斜齿圆柱齿轮传动的模糊可靠优化设计
Based on Pro/E,this paper introduces a method of creating the cylindrical helical gears by using swept-blend fuction.
本文介绍了在Pro/E环境下,如何利用扫描混合功能创建斜齿圆柱齿轮模型,并结合参数和关系式及运动分析模块等功能,实现了斜齿轮的参数化造型,并对斜齿轮传动进行运动仿真。
Numerical simulation of helical gear warm closed-die forging;
圆柱斜齿轮闭式温锻数值模拟
In order to meet the operating requirement, the precision design and machining for the helical gear are made.
为更好满足使用要求,对圆柱斜齿轮进行精确设计与加工,利用非线性有限元仿真软件MSCMarc对圆柱斜齿轮动态啮合过程齿面接触应力和齿根弯曲应力变化规律进行研究,利用疲劳分析软件MSCFatigue对轮齿齿根弯曲疲劳寿命进行仿真计算,并根据设计寿命计算出安全寿命系数,为齿轮设计提供理论依据。
3-D Finite Element Vibration Analysis of Helical Gears
斜齿圆柱齿轮的三维有限元振动分析
Multi-target optimization design of the Helical gears drive
斜齿圆柱齿轮传动的多目标优化设计
Parametric Design of Standard Involute Helical Gears Based on Pro/E Wildfire
基于Pro/Engineer标准渐开线斜齿圆柱齿轮参数化设计
Finite Element Analysis of Involute Helical Gear of Rotary Plow
旋耕机斜齿圆柱齿轮的建模和弯曲分析
Optimal Design of Reliability for the Single-stage Helical Cylinder Gear Reducer
单级斜齿圆柱齿轮减速器的可靠性优化设计
Study of Involute Spur Gear Pair with Modified Factor' Limit Value
渐开线斜齿圆柱齿轮变位系数极值研究
Parameterized design of cylindrical involute helical gear using UG
利用UG对渐开线斜齿圆柱齿轮参数化设计
The Parameterization Design of Helical Gear based on UG
基于UG的斜齿圆柱齿轮建模参数化方法
The Application of Genetic Algorithm on the Optimized Design of Helical Cylinder Gear Transmission;
遗传算法在斜齿圆柱齿轮传动优化设计中的应用
Parametric Design for Involute Helical Cylindrical Gear Basing on Relations of Pro/E
基于Pro/E关系式的渐开线斜齿圆柱齿轮参数化设计
straight-cut gear
直齿圆柱齿轮，正齿齿轮
ckyclindrical gears and gear pairs
圆程齿轮和圆柱齿轮副
straight spur gear-on-gear pump
圆柱直齿[外啮合]齿轮泵
spur gear differential
直齿圆柱齿轮差速器
BEM for 3-D Elastic Deformation Analysis in a Cylindrical Helical Gear
圆柱斜齿轮三维弹性变形的边界元法
3D Molding Design of Cylindrical Helical Gear Based on Pro/E
基于Pro/E的圆柱斜齿轮三维造型
Analysis of Skewed Tooth Bevel Gear and Straight Tooth Bevel Gear
斜齿圆锥齿轮与直齿圆锥齿轮应力分析研究
A unified model was established for spur cylindrical gears, helical cylindrical gears, spur bevel gears and helical bevel gears.
建立了直齿圆柱齿轮、齿圆柱齿轮、齿圆锥齿轮、齿圆锥齿轮的统一模型。