A study on separation of p-aminobenzoic acid from wastewater using emulsion liquid membranes;
乳液液膜法对水中对氨基苯甲酸分离富集的研究
The experimental research on the solution of the problem in the course of the coating of the emulsion paper-plastic composite adhesive;
乳液型复膜胶存在问题及解决方法的实验研究
The stability and rheology of the emulsion,the morphology and dispersivity of the latex particles and the mechanical properties and Wide-Angle X-ray Spectrum (WAXS) of the latex film were investigated.
对该乳液的稳定性、流变性、胶乳粒子大小形态及分散性、乳胶膜的力学性质、宽角X射线衍射谱进行了研究。
The stability, rheological property of the blended system were studied and the mechanical property of its latex film was also in vectigated.
对乙烯－醋酸乙烯共聚物（ＶＡＥ）乳液与丙烯酸酯共聚物（ＰＡ）乳液共混体系的稳定性、流变性及乳胶膜力学性能进行研究，结果表明，适量的非离子型乳化剂加入对共混体系的稳定性有明显作用。
Study on interfacial reaction of internal phase in process of extracting Cr~(3+) by emulsion liquid membranes;
乳状液膜法提取Cr~(3+)内相界面反应的研究
Selective extraction of mandelic acid enantiomers using emulsion liquid membranes by chiral ligand exchange;
手性配体交换乳状液膜选择性萃取扁桃酸对映体
The main purpose of this paper was to study on demulsification of Cr(Ⅵ) by emulsion liquid membranes.
研究了以三正辛胺、仲辛醇和磷酸三丁酯为载体,Span-80为表面活性剂,煤油为膜溶剂制成的乳状液膜处理含Cr(Ⅵ)水样的破乳方法,对离心破乳、化学破乳进行了实验研究,同时对破乳后的油相重新进行了制乳、破乳实验。
The Comparison Study of Drying Kinetics and Cross-linking Desity of Formulated and Prevulcanized Natural Latex Films during Drying
配合胶乳和硫化胶乳胶膜干燥历程及交联密度比较研究
Synthesis and Characterization of Modified Silicone-Acrylic Latex;
改性硅丙乳液的制备及其乳胶膜性能的表征
Study on drying kinetics and cross-linking structure of natural latex film
天然胶乳胶膜干燥过程及交联结构研究
Structure and Properties of Waterborne Polyurethane Modified with 3-Aminopropyltriethoxysilane and Its Films
氨基硅氧烷改性水性聚氨酯及其乳胶膜的性能
Natural rubber latex concentrate-Preparation of dry films
浓缩天然胶乳 干胶膜制备
the standard preparation methods of dried or vulcanized compounded latex films for testing
非硫化混合胶乳膜和干燥混合胶乳膜的标准制备方法
Fumo plastic, white latex, pressure, urine aldehyde plastic, ethanol diluted materials, construction plastic, strong plastic, Shuangzufen plastic, furan resins such as plastic manufacturing.
复膜胶、白乳胶、压敏胶、尿醛胶、乙醇稀料、建筑胶、大力胶、双组份胶、呋喃树脂胶等类制造。
Determination of minimum film-forming temperature of emulsion for latex paints
GB/T9267-1988乳胶漆用乳液最低成膜温度的测定
Application of Reactive Emulsifier on Emulsion Pressure Sensitive Adhesive for Surface Protective Films
反应性乳化剂在乳液保护膜压敏胶中的应用
STUDY OF ACRYLIC EMULSION ADHESIVE FOR BOPP FILMS;
BOPP膜用丙烯酸酯乳液胶粘剂的研究
Cause for the whitening of exterior wall latex coatings and solution to it
外墙乳胶漆涂膜“泛白”原因及解决措施
The Comparison Study of Drying Process of Thick Natural Latex Film under Hot Air and Infrared Ray
天然胶乳厚胶膜热风干燥与红外干燥对比研究
Synthesis and Properties of Acrylate Emulsion Pressure Sensitive Adhesive for Protective Film;
丙烯酸酯乳液保护膜压敏胶的合成与研究
Influence of Latex Structure on Morphology and Performance of Latex Coatings
乳胶粒子形态对涂膜形貌和性能的影响研究
Preparation of High Strength Acrylate Emulsion Pressure-sensitive Adhesive for protective film
保护膜用高剥离力丙烯酸酯乳液压敏胶的研制
Factors Influencing Latex Particle Size and Water Absorption of Styrene-Acrylic Emulsion
苯丙乳液胶粒粒径和涂膜吸水率的影响因素
Research development of acrylic emulsion adhesive for paper-plastic lamination
丙烯酸酯类乳液型纸塑复膜胶的研究进展
Used to blend and scoop out lotions, creams, gels and masks, ensure products are not contaminated.
搅拌和从盒中提取乳液、乳霜、凝胶和面膜，确保成品不被污染。