Properties of a new thermoplastic elastomer sulfonated styrene-butadiene rubber ionomers and their blends;
热塑性橡胶——磺化丁苯橡胶离聚体的性能及其共混
Synthesis and properties of water-absorbing thermoplastic elastomers --oxyethylene-oxypropylene-styrene multiblock copolymers;
吸水性热塑性橡胶——氧乙烯-氧丙烯-苯乙烯多嵌段共聚物的合成及性能
Foamed ethylene-propylene-diene rubber/polypropylene thermoplastic vulcanizate prepared by chemical foaming Ⅰ. Extrusion processing parameters;
化学发泡法制备发泡三元乙丙橡胶/聚丙烯热塑性硫化胶 Ⅰ.挤出工艺参数
Properties of intumescent flame retardant ethylene propylene diene monomer/polypropylene thermoplastic vulcanizate;
膨胀阻燃三元乙丙橡胶/聚丙烯热塑性硫化胶的性能
NBR/PP thermoplastic vulcanizates compatibilized by ATBN/MP;
ATBN/MP复合增容NBR/PP热塑性硫化胶
FLAKING METHOD OF MEASURING THE PHYSICAL PERFORMANCE OF SBS SAMPLE;
测定热塑性丁苯橡胶颗粒样品物理性能的制片方法
The thermoplastic elastomer from SBS/LDPE blend having excellent mechanical properties,such as high mechanical strength and elongation at break and repeatable processability,was prepared by partial dynamic vulcanization.
选用热塑性丁苯橡胶(SBS)和低密度聚乙烯(LDPE)为主体材料,采用部分动态硫化法制备了一类性能良好的材料热塑性丁苯橡胶 低密度聚乙烯共混型热塑性弹性体,具有力学强度高,断裂伸长率大,可重复加工等特点,并研究了聚烯烃的品种、橡塑比、硫化体系等因素对动态硫化SBS LDPE热塑性弹性体力学性能的影响。
Preparation and properties of RIIR/PP TPV
IIR再生胶/PP热塑性硫化胶的制备与性能研究
The effects of the preparation and the addition level of flame retarder on the properties of flame retardant EPDM/PP TPV were investigated.
研究制备工艺和阻燃剂用量对EPDM/PP阻燃热塑性硫化胶(TPV)性能的影响。
The effect of the primary flame retardant magnesium hydroxide [Mg(OH)_2] combined with decabromo diphenylethane(DBDPE)/antimonous oxide(Sb_2O_3)/ingredient A——a polymerized organo-silicone on the properties of EPDM/PP TPV was investigated.
采用氢氧化镁为主阻燃剂,配合使用十溴二苯乙烷(DBDPE)、三氧化二锑和配合剂A(一种有机硅高分子材料),研究四者对EPDM/PP热塑性硫化胶(EPDM/PPTPV)性能的影响。
"(10~100IRHD) Rubber,Vulcanized or thermoplastic--Determination of hardness (hardness between 10 IRHD and 100IRHD)"
GB/T6031-1998硫化橡胶或热塑性橡胶硬度的测定
" Rubber,vulcanized or thermoplastic--Determination of compression stress-strain properties"
GB/T7757-1993硫化橡胶或热塑性橡胶压缩应力应变性能的测定
" Rubber,vulcanized or thermoplastic-Determination of tensile stress-strain properties"
GB/T528-1998硫化橡胶或热塑性橡胶拉伸应力应变性能的测定
" Rubber,vulcanized or thermoplastic--Determination of adhesion to textile fabric"
GB/T532-1997硫化橡胶或热塑性橡胶与织物粘合强度的测定
" Rubber, vulcanized or thermoplastic--Determination of dimensions of test pieces and products for test purposes"
GB/T5723-1993硫化橡胶或热塑性橡胶试验用试样和制品尺寸的测定
" Rubber, vulcanized or thermoplastic--Determination of compression stress relaxation(rings)"
GB/T13643-1992硫化橡胶或热塑性橡胶压缩应力松弛的测定环状试样
" Rubber, Vulcanized or thermoplastic Determination of compression set at ambient elevated or low temperatures"
GB/T7759-1996硫化橡胶、热塑性橡胶常温、高温和低温下压缩永久变形测定
" Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part1: Physical tests"
GB/T9865.1-1996硫化橡胶或热塑性橡胶样品和试样的制备第一部分:物理试验
Shock Eraser Insert: Thermoplastic rubber core inside a thermoplastic elastomer butt cap is pressure fit into the shaft to reduce frame shock and vibration.
减震插片：拍柄内置热塑性橡胶内核同热塑性弹性体，有效减少球拍震动。
Performance of thermoset rubber but processed like thermoplastic.
热固性橡胶之性能，热塑性塑料之加工方法 .
hardness testing methods for rubber, vulcanized or thermoplastic
硫化橡胶及热塑橡胶硬度试验方法
DEVELOPMENT OF DYNAMICALLY VULCANIZED EPDM/ POLYOLEFIN THERMOPLASTIC ELASTOMERS
动态全硫化乙丙橡胶/聚烯烃共混热塑性弹性体
Effect of precipitated silica on properties of thermoplastic natural rubber
沉淀法白炭黑对热塑性天然橡胶性能的影响
meter elasticity for rubber or plastics
橡胶或塑料弹性测量器
permanent set testing methods for rubber, vulcanized or thermoplastic
硫化橡胶及热塑橡胶的永久变形的测定
Study on the Compatibility of Ethylene-Vinyl Acetate Rubber and Thermoplastic Polyurethane Elastomer Blends;
乙烯—醋酸乙烯酯橡胶与热塑性聚氨酯弹性体的相容性研究
Dynamic fully vulcanized EPDM/PP thermoplastic elastomer
动态全硫化三元乙丙橡胶/聚丙烯共混型热塑性弹性体
Study on Low-halogens Flame-retardant PVC/PNBR Thermoplastic Elastomer;
低卤阻燃聚氯乙烯/粉末丁腈橡胶共混型热塑性弹性体研究