TiN and TiCN coated HSS precision built up broaches are developed.
研制了TiN和TiCN两种涂层高速钢精密组合拉刀。
The technical problems in the design and manufacturing of domestic built up broaches for connecting rods are analyzed, and solved methods are presented.
分析了连杆组合拉刀国产化研制中的技术难题 ,并提出了解决措
Design of set of broaches on helical Acme depth groove in small hole;
小孔梯形内螺旋深槽成组拉刀设计
For the analysis of large-diameter deep-hole screw thread,especially the cutting of single or multiple square tooth screw thread,we have designed a suit of grouped arbor for avoiding causing the median diameter of large-diameter deep-hole screw thread to the angle of taper.
对大直径深孔螺纹,特别是车单头或多头方牙螺纹的加工进行了分析,为了避免造成大直径深孔螺纹的中径成为锥度,设计了一套组合刀杆。
This paper takes drilling unit and gang tool base on trunk straight line-rotation type mix Asynchronous motor for application example.
以筒型直线-旋转混合型异步电机钻动力头和组合刀具的应用实例,说明了直线电机在CNC组合机床上的应用前景。
The sketches of secondary flow structure in compressor cascade with endwall fences,blade fences and combined fences were presented.
给出了具有端壁翼刀、吸力面翼刀和组合翼刀的可控扩散叶型(CDA)压气机叶栅的二次流结构简图。
The technical problems in the design and manufacturing of domestic built-up broaches for connecting rods are analyzed, and solved methods are presented.
分析了连杆组合拉刀国产化研制中的技术难题，并提出了解决措施。
six-keyway broach
六键拉刀, 花键拉刀
Groove Cutter Design and the Second-Development on Pro/Engineer for "the CAD System for Groove Cutter";
组合企口铣刀设计及企口铣刀CAD系统的研制
two edge of knives match the circumstance comparision more,an edgy first grade of observation matches the rate as 100% more.
两组刀口愈合情况比较,观察组刀口甲级愈合率为100%。
Development and Study of Intelligent CAD System for Cutting Tools Used on Modular Machine Tool;
组合机床刀具智能化CAD系统开发
Development of High-Effectiveness Strong Milling with Large Cutting
大走刀高效强力铣削组合机床的研制
Solid Cemented High-Accuracy Surface Broaching Tool;
整体硬质合金高精度平面拉刀的研究和开发
The subassembly can have two blades, three blades, four blades or five blades or more.
刀片组分为两刀、三刀、四刀、甚至五刀以上。
Latin American Confederation of Tourist Organization
拉丁美洲旅游组织联合会(拉美旅联)
Blade and handle are the component parts of a knife.
刀身和刀柄是一把刀的组成部分。
Based on the experiment, the influences of tool normal rake, chip pulling angle and chip pulling force on the shape and metallurgical structure of the fiber cross section are studied.
通过试验研究了刀具法向前角、拉屑力和拉屑角等对纤维横截面形状和金相组织的影响。
To assemble or canvass(members of a caucus).
集合选票，拉选票集合或拉（组织委员会成员）选票
Joint UNIDO/Yugoslavia Centre for Industrial Cooperatio
工发组织／南斯拉夫工业合作联合中心
Declaration of APEC Ministers on the Uruguay Round
亚太经合组织部长乌拉圭回合宣言
having a cutting edge or especially an edge or edges as specified; often used in combination.
具有锋利的刀刃，特别是有特定的一个或者几个刀刃；经常用于组合词。
Position lever assembly on floorpan and install lever mounting bolts.
将拉杆组合放置到底板上并安装拉杆固定螺栓。
A knife with a handle at each end of the blade, used with a drawing motion to shave a surface.
拉刮刀刀刃两端各有一个把手，拉动时可刮平表面的一种刀
carbide cutter
硬质合金刀刃[头]