Based on the analysis of the pitch error measure theorem for screw,the dynamic measure system of pitch error for lead screw constituted by single-chip microcomputer is discussed.
在分析丝杠螺距误差测量基本原理的基础上,简述了由单片微机组成的滚珠丝杠螺距误差动态测试系统,并开发了计算机辅助自动分析测控软件。
The reason of different surface quality between two sides of groove while whirlwind milling the lead screw is analyzed, and the special facing cutter for milling the lead screw is designed.
分析了旋风铣削丝杠螺纹时牙槽两侧表面质量差异的原因 ,设计了加工丝杠螺纹的专用铣刀
This paper has a study on error compensation theory of lead screw transmission and discuss the method to measure the screw error and establish the error compensation table.
研究了数控机床丝杠传动误差补偿原理 ,探讨了丝杠误差测量及制订误差补偿表的方法 ,实现了数控机床丝杠误差正反双向补偿功能 ,提高了机床定位精
Conditions of Effect of Screw Torsion Deformation to Transmission Rigidity;
丝杠扭转变形对传动刚度影响的条件
Influence of Torsion Deformation of the Screw on Electromechanical Rigidity;
滚珠丝杠扭转变形对机电综合传动刚度的影响
The automatic demolding mechanism with feed screw of ball bearing and gear with cavity is used in the mould, and through disconnecting the plastics from cavity smoothly by rotation of the cavity with screw, the question of demolding is resolved.
该模具采用滚珠丝杠、型腔齿轮自动脱模机构,通过螺纹型腔旋转使注塑件顺利脱离型腔,解决了螺纹脱模问题。
Improvement of adjust leadscrew of four-roll crusher used in sinter plant;
烧结厂破碎机调整丝杠的改进
The force-induced deformation of a precision long leadscrew during grinding is theoretically analyzed, and according to the grinding complex usually adopted in practice, computer simulation of force-induced deformation is carried out.
对精密长丝杠磨削过程中的力变形进行了理论分析，根据实际加工中经常采用的磨削工艺系统对磨削过程进行了力变形仿真，并提出了利用力变形仿真对中心架的数量与位置进行优化的方法。
Screw shaft is widely used as driving piece and locating piece, it plays an important role in mechanical industry, and inversely the developing of industry demands of more high precise screw shaft.
丝杠是各种机械和仪器中用作定位、传动的重要零件,它在机械工业中具有重要的地位,而工业的发展也对丝杠精度提出了越来越高的要求。
Consequently it not only serves as driving piece and locating piece, but also serves as measuring piece, it plays an important role in mechanical industry, and inversely the developing of industry demands of more high precise screw shaft.
丝杠是各种机械和仪器中用作定位、传动的重要零件,由于其结构特点,可把传动利定位在同一零件上实现,把角位移变成线位移。
One of the distinctive features of a ball screw is the ability to have increase rigidity by preloading.
滚珠丝杠的一大特性就是通过预压力提高丝杠的刚性。
A feed screw extends from the base to the knee.
进给丝杠从底座伸向升降台。
Design and Research of a New Ball Screw Shaft Measurement System;
新型滚珠丝杠测量系统的设计与研究
The Effect of the Drive System Parameters on the Vibration Frequency of the Screw
进给系统参数对丝杠振动频率的影响
Analysis of Micro-positioning Characteristics Screw Transmission
丝杠传动工作台运动特性与误差分析
The Finite Element Simulation on Force Amplification Mechanism of Mechanical Power Clamping Screws
机械增力丝杠增力机构的有限元仿真
Parametrization design of ball screw based on Pro/E
基于Pro/E的滚珠丝杠参数化设计
Soil Cone Penetrometer with Ball Screw Transmission
滚珠丝杠传动的土壤圆锥指数仪设计
Ball screws--Part 1: Vocabulary and designation
GB/T17587.1-1998滚珠丝杠副第1部分:术语和符号
The following table shows the material composition and heat treating details of a ball screw system.
下表列出了丝杠部件的材料构成和热处理工艺。
Adopts precision seamless ball and lead screw for movements along X,Y axis.
轴运动采用精密级无间隙滚珠丝杠传动。
Problems in Spectral Analysis of Ball-Screw Travel Error
滚珠丝杠导程误差频谱分析中的几个问题
DYNAMIC ANALYSIS AND SIMULATION OF A RE-CIRCULATION MECHANISM IN BALL SCREW
滚珠丝杠副滚珠循环系统的动力学研究和仿真
Application of ANN to the Control of Grinding Process of Long Precision Lead-Screw
神经网络在精密长丝杠磨削控制中的应用
A method of prolonging the life of adjusting screw in rolling mill
提高轧钢机压下丝杠螺纹副寿命的设计
Construction layer: adjustable bars can be used for supporting between scaffolding and shuttering.
2施工层处：脚手架与模板间用可调丝杠支顶。
Spectral Analysis and Theorectical Analysis for Lead Deviations of Ball Screw
滚珠丝杠副导程误差的谱分析与理论分析
Research on Machining Method and Dynamic Performance of Steep-lead Ball Screw Mechanism;
大导程滚珠丝杠副动力学性能及加工方法研究