Tensile behavior of gray cast iron with directional graphite flakes
定向石墨灰口铸铁的拉伸行为
This pure α-Al2O3 coating were used to high speed cutting of gray cast iron in our study,for solving the problem that κ-Al2O3 coating or κ-Al2O3 and α-Al2O3 coating couldn't be applicative stably in high speed cutting.
采用一种全新的过渡层工艺,在过渡层上进行Al2O3化学气相沉积涂层,制备了单一α-Al2O3涂层,取代传统的κ-Al2O3涂层或κ-Al2O3和α-Al2O3混合涂层,应用于灰口铸铁高速切削加工,解决了传统的κ-Al2O3涂层或者是κ-Al2O3和α-Al2O3混合涂层高速切削中稳定应用的问题。
8%SiC)suggested by multi-factor regression analysis,the wear resistance layers on the surface of HT200 gray cast iron of about 3mm depth is obtained,and its wear resistance is 2.
用该配方可以在灰口铸铁HT200表面获得一层3mm左右的耐磨复合层,其耐磨性约为基体试样的2。
Structure made of pearlitic stabilized cast-iron with parts in stabilized steel.
珠光体铸铁机架，部分部件高强度钢铸造。
Based on the analysis of eutectoid transformation of SG (spheroidal graphite) iron, the numerical model of formation of ferrite and pearlite during the eutectoid transformation was improved.
通过对球墨铸铁件共析转变的分析，改进了球铁件中铁素体与珠光体形成的数学模型。
The Process of Heat Treatment for Particle Pearlite Malleable Cast Iron
获得粒状珠光体可锻铸件的热处理工艺
a solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensite.
含铁碳化物或含碳铁的固体溶体，冷却可形成珠光体或马氏体。
A mixture of ferrite and cementite forming distinct layers or bands in slowly cooled carbon steels.
光体，珠铁在慢慢冷却的碳合金中的层状铁素体和碳素体的混合物
Study on the Manufacturing Procedure of Cast Ferritic Ductile Iron;
铸态铁素体球墨铸铁的生产工艺研究
The Fatigue Property of As cast HCC Ductile Iron Bars
水平连铸铸态铁素体球墨铸铁型材的疲劳性能
Development of GGG40.3 Grade Nodular Iron Valve Body Casting
GGG40.3球铁阀体铸件的研制
a steel that contains 0.9% carbon (the eutectic point in the iron-carbon system); a carbon steel with 0.9% carbon is pure pearlite.
含%碳的钢（铁碳混合物的低共熔点），含%碳的碳钢是纯珠光体。
The Fracture Toughness of Shaped Ferritic Ductile Iron by Horizontal Continuous Cast
水平连铸铁索体球墨铸铁型材的断裂韧性
Experimental Investigation on the Fabrication of As-cast Silicon and Molybdenum Ferrite Ductile Iron;
铸态铁素体硅钼球墨铸铁制备工艺的试验研究
Analysis on the Cast Condition Graphite in Production of the Ferrite Nodular Graphite Malleable Casts
铁素体球墨可锻铸铁件生产中铸态石墨的分析
The abrasive resistance of as-cast martensitic high chromium cast iron is 3 times more than that of Ni-hard cast iron.
铸态马氏体高铬铸铁的耐磨性是镍硬铸铁的3倍以上。
"The Block is cast in one piece from gray iron or iron alloyed with other metals, such as nickel or chromium. Some Blocks are cast from aluminum."
缸体是由灰铸铁或含有镍或铬的合金铸铁整体铸造而成的。有的缸体由铝浇铸而成。
Laser Alloying of Ductile Iron Surface Coated with Sub-Micron Ceramics
球墨铸铁表面激光亚微米陶瓷合金化
The Study of Making Slanting Wedge in Freight Train with ADI
用贝氏体球墨铸铁制作铁路货车斜楔铁的研究
lamellar annealing
形成片状珠光体的退火
Observation and Analysis on the Microporosity in As-Cast Bainite Grey Cast Iron
铸态贝氏体灰口铸铁中显微缩松的观察分析