Determination of Zn,Fe,Cr,Mn,and Cd in copper powder by flame atomic absorption spectrometry;
火焰原子吸收光谱法测定雾化铜粉中锌、铁、铬、锰、镉
The rapid solidification power technology and the controlled atmosphere bonded technology are utilized manufacturing for high property Silver-Copper bimetal strips.
采用快冷雾化制粉技术和可控气氛复合技术生产高性能的银铜复合带材 ,可以连续大卷重进行生产 ,所生产的复合带材厚度比均匀 ,复合界面清洁、复合强度高 ,电性能良好 ,并可根据客户的要求生产不同厚度比和机械性能的带
The water atomized iron powders were mixed with different lubricant contents.
采用水雾化铁粉,分别加入不同含量的润滑剂,以常温压制与温压两种压制方式成形,温压温度为130℃;测量了压坯、烧结坯的密度和弹性后效,并进行了对比与分析。
Ultra-high pressure consolidation and crystallization process of atomized Al_(82)Ni_(10)Y_8 alloy powder
Al_(82)Ni_(10)Y_8合金雾化粉末的超高压固结成形及晶化过程
CHARACTERIZATION OF FeNi30 CATALYST POWDER PRODUCED BY SUPERSONIC GAS ATOMIZATION
超音速气雾化制备FeNi30触媒粉末的表征
Study on Microstructure of T10 Steel Powders by High Pressure Gas Atomization
高压气雾化T10钢粉末微观组织的研究
Effect of technological conditions on preparation of Co_3O_4 powders by solution spray-oxidation
工艺条件对溶液雾化氧化法制备Co_3O_4粉末的影响
Experimental Study of Ultrasonic Atomization Method for Manufactruing Titanic Metallic Powder
功率超声雾化制备钛金属粉末的实验研究
Development of Planar Flow Casting Atomization Process for Production of Sn-Cu Alloy Powders;
平面流铸雾化制取锡铜合金粉末的研究
Manufacturing Microcapsules of Amur Grape Seed Oil by Spray-Drying
喷雾干燥法制备微胶囊化山葡萄籽油粉末油脂
Characterization of 316 L stainless steel powders produced by supersonic gas atomization
超音速气雾化制备316L不锈钢粉末的表征
Preparation of a novel powdered Fe-based superalloy by close-coupled gas atomization
紧耦合雾化制备Fe-13%Cr-3%W高温合金粉末
Effect of procedure conditions on characteristics of SnAgCu alloyed powder prepared by gas atomization
工艺条件对气雾化制备SnAgCu合金粉末特性的影响
The surface reaction of water atomized 304L austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。
To reduce to tiny particles or a fine spray.
使雾化，使成微粒，使成粉末使成为极小颗粒或微小尘埃
Study on the Process of Fabricating Fine Stainless Steel Powder by Gas and Solid Dual-phase Atomization;
固气两相流雾化制备微细不锈钢粉末工艺的研究
MICROSTRUCTURE AND MAGNETOSTRICTION OF Fe-Ga POWDERS PREPARED BY GAS ATOMIZATION
气体雾化制备Fe-Ga合金粉末的微结构及磁致伸缩性能
Effect of inner diameter of delivery tube end of atomizer on morphology and size distribution of free-lead solder powder
雾化器导液管内径对无铅焊锡粉末形貌及粒度分布的影响
Cooling Rate Calculation of Non-Equilibrium Aluminum Alloy Powders Prepared by Gas Atomization
气雾化制备非平衡态铝合金粉末冷却速度的计算(英文)
lance for liquid- or powder-spraying machines
液体或粉末喷雾机器的喷管
Through a cloud of dust, as l move nearer, I can make out three men working with these chemicals.
我走近了粉末部，透过一层云雾般的粉尘，我辨认出有三个人正在制作这些化学品。