Preliminary test of defibrator processing innovation;
热磨机提速改造初步偿试
Importing and Developing of MDF Defibrator;
中密度纤维板热磨机的引进与开发
On feeding installation of double rotary valve of defibrator.;
热磨机双作用回转阀进料装置的设计
Studies on Accurate Measure of Real Plate Gap and State Monitoring of Main Spindle of Refiner;
热磨机磨盘实际间隙精确测量与主轴运行状态监测的研究
An outline is given of technical measures for improving the performance of 44″M refiner in its research and design process in the aspects of productivity, fiber quality, and operation reliability.
介绍在44″M型热磨机研发过程中,为提高热磨机的性能包括产能、纤维质量和运行可靠性诸方面所采取的技术改进措施。
The article introduces the main parameters and arrangement of 50 inches large-scale refiner, and also introduces the solving method of main shaft beari ng,gap adjustment,sealing and etc.
介绍了50英寸大型热磨机的主要参数及配置,并提出了主轴轴承、间隙调整、密封等关键组件的解决方案。
Design、Analysis and Structure Optimization of Circular Straight Tooth Refining Plate of Defiberator;
圆环直齿热磨机磨片的设计分析和结构优化
With the maturation of the technology of defiberator, the scope ofdomestic medium density fiberboard production lines is expanding gradually,but a considerable number of domestic production lines are composed ofimported defib.
国产热磨机与进口热磨机有较大差距，其中和磨片上无关系。
This paper briefly introduced the developing process of our country Medium Density Fiberboard (MDF) industry and defiberator, it has analyzed the advantages of the imported defiberator and brought forward the basic technical characteristics which the new domestic defiberator should have.
简述了我国中密度纤维板行业及热磨机的发展过程,分析了进口热磨机的优点,提出了作为国产新型热磨机应具备的基本技术特征,介绍了国产新型热磨机取得的技术性突破;论述了近阶段国产MDF生产线和热磨机的发展机遇和方向。
The maximum stress and deformation of the refiner plate have been obtained through the thermal stress analysis of the sector of the defiberator-refiner plate.
通过对扇块分区热磨机磨片进行热应力分析,得到磨片的最大应力值和最大变形,并运用ANSYS的优化模块对磨片进行结构优化设计,得到了能够满足各项性能要求的新磨片,并最终达到了产品设计的轻量化要求。
The obtained amine-modified phenol-formaldehyde resins comprise novel retention systems with polyethylene oxide, which can be used to improve TMP pulp retentions.
将其与聚氧化乙烯(PEO)组成新型的双元助留体系,应用于热磨机械浆(TMP)抄纸工艺中,取得了很好的助留效
Masson's pine TMP was bleached with formamidine sulphinic acid(FAS) or hydrogen peroxide and FAS.
本文用甲脒亚磺酸 (FAS)漂白热磨机械浆 (TMP) ,探讨了FAS用量、NaOH和FAS用量比、浆浓、漂白温度和时间对漂后纸浆白度的影响 ,并进行了过氧化氢—甲脒亚磺酸两段漂白 ,比较了FAS单段漂白、H2 O2 —FAS、FAS—H2 O2 两段漂白的效果。
Design、Analysis and Structure Optimization of Circular Straight Tooth Refining Plate of Defiberator;
圆环直齿热磨机磨片的设计分析和结构优化
Finite Elements Analysis and Structure Optimization of Fan-shaped Refiner Plate of Defiberator;
扇块分区热磨机磨片的有限元分析与结构优化
Analysis of Eucalyptus CTMP by XPS and SEM
桉木化学热磨机械浆的XPS和SEM分析
Study on the Mechanism of Refining Plate to Influence of MDF Fiber Separation Quality;
热磨机磨片对中密度纤维板纤维分离质量影响机理的研究
Effect Mechanism of Fiber Quantity and Quality on Refiner Energy Consumption
纤维产量和质量对热磨机能耗影响的机理分析
Studies on Accurate Measure of Real Plate Gap and State Monitoring of Main Spindle of Refiner;
热磨机磨盘实际间隙精确测量与主轴运行状态监测的研究
The Improvement of M-48 Import Defibrator Blow Valve Hydraulic System
对M-48型进口热磨机喷放阀液压系统的改进
Effect of Hot Mill Parameter on the Fiber Quality of Corn Stalk
热磨机参数对玉米秸秆纤维制造质量的影响
Establishment on Grinding Model of Y7125 Gear Grinder and Study on Heat State of Gear Grinding Process;
Y7125磨齿机磨削模型建立与磨齿过程热状态研究
The Research of Friction Wear of Internal Combustion Engine Bases on The Method of Heating Analysis of Ferrograms;
分析内燃机的磨损磨粒—利用铁谱加热法
Study of Micro-scale Abrasive Wear Mechanism of Y-TZP Ceramic
热压烧结氧化锆陶瓷的微磨料磨损机制研究
The Investigation of Mechanism and Thermal Phenomena in High Speed Deep Grinding of Advanced Ceramics
工程陶瓷高速深磨机理及热现象研究
Effect and Elimination of the Grinding Heat of Multi-wire Saw
多线切割机磨削热的不良影响及消除
Carbon nanotubes synthesized by mechanothermal method
机磨热加工法合成碳纳米管(英文)
The Use of MPS180 Coal Mills at Huaneng Beijing Thermal Power Plant
MPS180磨煤机在华能北京热电厂的应用
Thermal stability of AlSi-ployester abradable seal coating used in an aircraft engine
飞机发动机用AlSi-ployester可磨耗封严涂层的热稳定性
Research on Finite Element Analysis of Welding Process of Mill Shell Butt Joint;
磨机筒体对接接头焊接热过程有限元分析研究
Research on Corrosion Wear Mechenism of Dip-Roll Sleeve in Hot-Dip Galvanizing;
热镀锌板沉没辊轴套材料腐蚀磨损机理的研究