Dimensional control in the process of electrolytic abrasive mirror finishing;
电解镜面抛光中的尺寸控制
Study on three-swing-jib support system for optical mirror;
摆臂式三点光学镜面支撑系统的研究
Carbon fiber composite material used in optical mirror;
碳纤维复合材料用于光学镜面
By using the light treatment technology in virtual reality technology, the sunlight was divided into three parts as environment light, diffusion light and lens light, and the effects of these three parts of light on leaf colour wer.
为更好的将其应用到虚拟作物中,用RGB系统表示叶色,利用虚拟现实技术中的光照技术,将太阳光分为环境光、漫射光和镜面光3部分,分别研究了这3部分光对叶色的影响,并根据颜色和太阳光的内在联系,建立了小麦叶片颜色的识别模型。
Precision mirror polishing. Ultra-flat surface polishing.
精密镜面抛光,超平平面抛光.
Seat face Stellited, ground and lapped to a mirror finish.
钨铬钴合金面阀座，经过研磨抛光达到镜面抛光度。
It helps make more efficient mirror finish in buffing for aluminum and stainless steel, improving the working environment a lot.
它可以有效地帮助您进行镜面抛光，并可大幅改善工作车间的环境。
Rolls machined from high-grade tool steel, which has been treated to a hardness of over 60 Rockwell C and hard chromed, precision ground as well as polished to a mirror surface.
辊由高级工具钢制成，经过热处理，洛氏硬度超过60，并经镀铬和镜面抛光处理。
Using refined grinding material to polish in order to get the mirror effect.
采用精细磨料抛光形成镜面效果的材料。
Optical Properties Analysis of Compound Parabolic Refractive X-ray Lenses
抛物面型X射线组合折射透镜光学性能分析
a reflecting telescope that has a paraboloidal primary mirror and a hyperboloidal secondary mirror; light is brought to a focus through an aperture in the center of the primary mirror.
具有抛物面主镜和双曲面次镜的一种折射式望远镜；光线被集中到主镜中心的孔径。
The result concludes that the polishing solution is innocuous and harmless to the environment.
结果表明，经化学抛光后的铜及其合金表面光亮，达到镜面效果。
The primary mirror. This is the paraboloidal mirror at the bottom of the tube. It has an aluminized surface that reflects starlight to form an image at the focal plane.
主镜。是位于镜筒底部的一块抛物面镜。表面镀铝膜，将星光反射到焦平面上成像。
the parabolic reflector of a searchlight
探照灯的抛物面反射镜
polished dressing
磨光，抛光，敷面打光，研磨
The Observation of Different Polishing Methods upon Teeth Surface by Scanning Electron Microscopy after the Treatment of Ultrasonic Scaling;
超声波洁治后不同抛光方法对牙体表面影响的扫描电镜观察
When inspection indicates the surface to be filled, a rubbing compound may be used to obtain a high gloss.
表面经过检验合格后，可用抛光剂抛光。
Any of the lenses, prisms, or mirrors of an optical instrument.
光学镜光学仪器的透镜、棱镜或平面镜
Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage.
楔板经过研磨抛光达到镜面光洁度，还经过紧密性引导来防止由于拖动造成阀座的损坏。
Experimental Investigation of Stressed Mirror Polishing on Paraboloid
应力抛光技术加工抛物面的实验研究
A smooth, glossy finish or appearance; luster.
抛光面，光泽一个光滑的有光泽的抛光木或表面；光泽
Machines force more polishing oils into the surface, for deeper gloss and reflections.
在抛光盘表面可以加更多一些的抛光剂，可以进行深层的抛光处理。