Surface modification of polyurethane by grafting methyl acrylate via ATRP;
聚氨酯表面接枝丙烯酸(甲)酯改性研究
Effect of added methyl acrylate on the polymerization of carboxylic chloroprene emulsion;
丙烯酸(甲)酯对羧基氯丁胶乳聚合体系的影响
Study of Modification of SAN Resin by Methyl Acrylate;
丙烯酸(甲)酯改性SAN树脂的研究
Study on Copolymerization of Degraded Natural Rubber Latex with Methacrylate;
丙烯酸(甲)酯与降解天然橡胶胶乳的共聚研究
Study on Synthesis of Acrylic Acid-Methacrylate Copolymer as Scale Inhibitor;
丙烯酸/丙烯酸(甲)酯共聚物阻垢剂合成工艺研究
A new method of synthesis of N,N-dimethoxyloneethyl aniline was reported by using anhydrous aluminum chloride, aniline, and methacrylate at lower temperature, the conversion,the yield,and the purity was over 95,91,96 respectively.
报道了用无水三氯化铝作催化剂在低温下将苯胺和丙烯酸(甲)酯转化为N ,N -二甲氧基羰基乙基苯胺的新方法 ,其反应转化率达 95 %以上 ,产品收率高于 91% ,纯度高于96 % 。
Synthesis of methylacrylate-triethanediol bisacrylate and study on property of water retaining of polymer;
丙烯酸(甲)酯—三乙二醇双丙烯酸酯悬浮聚合产物的制备及保水性研究
A method to synthesize N,N-dimethylaminoethyl acrylate(DMAEA) by reacting methylacrylate(MA) with dimethylethanolamine(DMAE) using dibutyl tin dilaurate as catalyst was studied.
以N,N-二甲氨基乙醇(DMAE)与丙烯酸(甲)酯(MA)为原料,二月桂酸二丁基锡为催化剂,采用酯交换工艺,对N,N-二甲基氨基丙烯酸乙酯(DMAEA)的合成进行了研究。
Apply of composite particles of methyl methacrylate and calcium sulphate with a core-shell microstructure prepared through in-situ polymerization;
原位聚合制备核壳结构甲基丙烯酸(甲)酯/硫酸钙复合粒子的应用
Preparation process for methyl methacrylate from isobutene(tert-butyl alcohol) by oxidation method;
异丁烯(叔丁醇)氧化法制备甲基丙烯酸(甲)酯的工艺
Synthesis of 4-arm methyl methacrylate star polymer by atom transfer radical polymerization;
原子转移自由基聚合制备四臂聚甲基丙烯酸(甲)酯星形聚合物
New Ligand Containing Indole in Solution Atom Transfer Radical Polymerization of MMA;
含吲哚基新配体催化甲基丙烯酸(甲)酯的原子转移自由基溶液聚合
Atom Transfer Radical Polymerization of MMA Initiated by Butyl Chloride;
氯代仲丁烷引发甲基丙烯酸(甲)酯的原子转移自由基聚合
Reverse ATRP of MMA Catalyzed by AIBN/SmCl_3/Lactic Acid System;
AIBN/SmCl_3/乳酸体系催化甲基丙烯酸(甲)酯的反向原子转移自由基聚合
Preparation of acrylic-methylmethacrylate-aniline copolymer hydrogel and its performance detection;
丙烯酸、甲基丙烯酸(甲)酯与苯胺三元共聚凝胶的制备及性能测定
Synthesis of graft copolymer of poly(styrene-g-methylmethacrylate);
聚苯乙烯-甲基丙烯酸(甲)酯接枝共聚物的合成
New Developments of Methylmethacrylate Monomer and its Polymers;
甲基丙烯酸(甲)酯单体及其聚合物的新发展
Study on Property of PMMA-CHMI-St Copolymer;
甲基丙烯酸(甲)酯-N-环己基马来酰亚胺-苯乙烯三元共聚物的研究
The Coal g MAH/PMMA was prepared with the method of prepolymer and the effects of the quantity of coal,viscosity and temperature on reaction were investigated, at the same time, the rheological behavior of the blended system and the pure PMMA system were observed by means of a capillary rheometer.
采用预聚体的方法制备出煤接枝马来酸酐同甲基丙烯酸(甲)酯的复合物 (Coal- g-MAH/PMMA) ,讨论了煤的用量、体系粘度及聚合温度对反应的影响 ,同时运用毛细管流变仪研究了共混体系和纯 PMMA体系的流变性能 。
Objective:To study the mechanical properties o f the PMMA denture -base enhanced by c arbon fiber cloth.
目的:研究碳纤维织布增强聚甲基丙烯酸(甲)酯(PMMA)基托的机械性能。
The characteristic ratios of mean-square radius of gyration of polystyrene(PS)and poly(methyl acrylate)(PMA)chain similarly with one substituent are calculated and compared.
利用构象-构型统计方法,推导了均方回转半径和温度系数公式,并对同为单侧基二态模型的聚苯乙烯和聚丙烯酸(甲)酯链均方回转半径特征比作了计算比较,发现构象能对链无扰尺寸和温度系数的依赖关系是不同的,说明侧基对聚合物性质有重要影响。