Test Analyses of Diameter Matching of Front Top Roller and Back Top Roller of Spinning Frame;
细纱前后档胶辊直径搭配试验分析
Spinning Test of Big Diameter Spinning Top Roller;
大直径细纱胶辊纺纱试验
The result of the wool yarn fault by the Uster evenness testerand the contrast analysis of the surface diameter;
电容式条干仪与表观直径实测毛型纱线疵点的对比
The measurement and extraction of the section profile features of cylinders are the basis of the evaluation of their diameters,form & position errors and roughness.
圆柱体截面轮廓要素的测量与提取是圆柱体直径、形位误差和表面粗糙度评价的基础。
In this paper,We give odd strong harmonious labeling of trees whose diameters are four.
给出了直径为4的树的奇强协调标号。
At present,there are many methods to produce the multi-differences mixture yarn,but to produce through one spinneret is more economical and with better effects compared with other methods,so the influences of the diameters of the die-spin- ning nozzles o.
研究了同板多异涤纶 POY 的单丝细度及取向度与喷丝孔直径的关系, 得到第一,单丝直径与喷丝孔直径的平方成线性关系,单丝线密度与喷丝孔直径的四次方成线性关系;第二,与粗的单丝相比,细的单丝表现出更高的取向度。
Of, relating to, or along a diameter.
直径的直径的，与直径有关的，或沿直径的
A DIA PISTON DIAMETER
A DIA 活塞直径
related to or along a diameter.
属于直径，与直径有关，或沿直径。
full diameter radial permeameter
大直径径向渗透率仪
Inside Diameter I.D
内直径（俗名管内径）
length diameter ratio
长径比（长度与直径之比）
The diameter of the objective of a telescope.
孔径望远镜物镜的直径
Wire with 1.5 to 3 mm dia.
直径1.5-3mm的铁丝
Rear Discs 313 mm diameter
后碟煞直径313 mm
blade-circle diameter
直翼推进器盘面直径
The diameter of the sun is one hundred and nine times that of the earth .
太阳的直径是地球直径的109倍。
How much is the diameter of the sun longer than that of the earth ?
太阳的直径比地球的直径长多少?
The diameter of the sun is more than one hundred times longer than that of the earth .
太阳的直径比地球直径长一百多倍。
Thickness or diameter, as of sheet metal or wire.
直径，厚度金属板的厚度或线的直径
The stem has a slightly smaller diameter than the valve bore.
阀杆的直径略小于阀体孔的直径。
The size of tumors ranged from 7 to 19 cm ( mean 12.5 cm) in diameter.
肿瘤直径7-19厘米,平均直径12.5厘米。
TUBE DIAMETER SHALL BE WITHIN 10% OF NOMINAL DIAMETER WITHIN BEND RADIUS.
管直径须在直径理论值和折弯半径的10%以内。
The length of such a segment.
直径长这样一段的长度