According to the results of the research work, which is focused on function and structure of knife shaft, the key part of it is called circumvolve lock set kit.
通过对自动回转刀架的工作原理及结构设计分析,发现刀架的关键部件为旋转锁紧机构,运用控制理论和系统模型分析论证旋转锁紧机构的原理和失效,并对其工作原理和性能进行优化,研制出新的旋转锁紧机构,更换自动回转刀架失效部件,恢复自动刀架功能和精度,保证了宝钢钢管高精度管螺纹加工生产的稳定。
rotation-lock tubing hanger
旋转锁紧油管悬挂器
Turn the brass memory lock ring until the aluminum memory ring stop contacts the step on the valve stem. Do not overtighten. Finger-tight pressure is sufficient.
旋转黄铜记忆锁环直到铝记忆环停止接触阀杆上的台阶为止。不要过紧。手指旋紧压力已经足够了。
A metal bar or rod in the mechanism of a lock that is thrown or withdrawn by turning the key.
锁簧锁上的金属条或杆，旋转锁可将其压进或抽出锁孔
gyro spinning and unlocking mechanism
陀螺定向仪旋转和解锁机构
Passing through the turnstile is another line that marks a transition back to the locked node.
通过旋转门则是另一线条，代表转变回上锁节点。
I had to cling tight to the backstay, and the world turned giddily before my eyes;
我只觉得天旋地转，不得不紧紧抓住后牵索。
It is important to recognize the point of stall and the beginning of a spin.
认识失速点和旋转的开始是很要紧的。
a band that can be tightened around a shaft to stop its rotation.
能够拉紧车轴并使其停止旋转的带子。
You must turn the lid clockwise if you want to fasten it tightly.
你按顺时针方向旋转才能拧紧盖子。
Do not tighten packing nut enough to bind stem.
不要过紧旋转填料螺母，以免粘接阀杆。
Study of Mode-locking Fiber Laser Based on Nonlinear Polarization Rotation Technology
非线性偏振旋转锁模光纤激光器的研究
Finite element analysis of self-locking cannulated compression anti-rotation blade
自锁空心加压防旋转刀片的有限元分析
Turn the hollow bolt so that it is fixed on the bake cover or the flange plate.
安装后必须旋出空心螺栓锁紧在电机后端盖或法兰盘上。
Closing Push the sash to the frame and turn down the handle the door closed tightly like swing doors.
锁紧将滑动门扇推向门框,转动把手既可将门轻松锁紧.与平开门具有同等的高密封性能.
To revolve or cause to revolve.
旋转旋转或引起旋转
The motor was a rubber band that had to be turned many times until it was tight.
它的马达是一根橡皮筋，必须旋转很多次直到旋紧为止。
Insert the key in the ignition lock cylinder and turn the ignition switch to the On position.
将钥匙插入点火锁柱中，旋转点火开关到开启的位置。
Replace by seating the assembly in the lamp housing and turning the lock ring 1/8 turn clockwise to secure.
更换组合，将组合定位于灯的外壳并顺时钟旋转锁杆1/8圈以固定。