Because the stepless gearshift mechanism with two cone wheels and a friction disk wheel has such advantages as transmission being stable, low noise, simple configuration, various forms and avoidable damage of elements with overload sliding, it has been widely used in actual practice, especially in precision machines and instruments.
由于锥轮—摩擦盘轮—锥轮无级变速传动机构(简称锥轮变速机构)具有传动平稳、噪音很小、结构简单、过载打滑(可避免部件受损)、形式多样等优点,所以在实际传动中,特别是在精密机械与仪器中得到了广泛的应用[1],然而至今尚未见到计算锥轮变速机构传动比的专用公式。
Welding repair of bevel gear shaft of 17CrNiMo6 steel alloy;
17CrNiMo6钢锥齿轮轴焊接修复
Study on Intervention in Normal Circular-arc Bevel Gears Processing;
法向圆弧锥齿轮加工干涉研究
Study on intervention in milling normal circular-arc bevel gears;
铣削加工法向圆弧锥齿轮的干涉研究
Structure of forming die for preparing high strength PM bevel gears;
粉末冶金高强度锥齿轮成形模具结构
A design method for gear grinding machine with conical wheel based on function modularization;
基于功能模块化的锥面砂轮磨齿机设计方法
According to the working principle of gear grinding with generating method and meshing theory of gears,the validity of involute helicoid grinding with conical wheel gear grinding machine was proved with normal method of tooth profile,where the equations of tooth profile and involute helicoid were concerned.
根据展成法磨齿工作原理和齿轮啮合原理,利用齿形法线法,从齿形方程和渐开螺旋面两个方面对锥面砂轮磨齿机正确磨削斜齿圆柱齿轮渐开螺旋面进行了理论验证,该验证方法及推导过程有助于理解采用齿条形刀具磨削齿轮的原理,同时为该加工方法提供了相应的理论基础。
According to the working principle of conical wheel gear grinding machine and meshing theory of gears,the involute helicoid grinding with conical wheel gear grinding machine is proved with normal of tooth profile method,which include equations of tooth profile and involute helicoid.
文章根据锥面砂轮磨齿机工作原理和齿轮啮合原理,利用齿形法线法,从齿形方程和渐开螺旋面两个方面对锥面砂轮磨齿机正确磨削斜齿圆柱齿轮渐开螺旋面进行了理论验证,该验证方法及推导过程有助于理解采用齿条形刀具磨削齿轮的原理,同时对提高磨齿加工精度具有理论指导意义。
Design of bevel gear forgings and Developing of SolidWorks;
基于Solid Works的圆锥齿轮精锻件的二次开发
Optical design of flashed cold die forging of car used bevel gear;
轿车圆锥齿轮闭式冷精锻凹模的优化设计
Simulation and creating model of straight bevel gear;
直齿圆锥齿轮的建模和运动仿真
The Adjustment for the Clearance of the Helix Cone Gear Mesh Side for the Reducer and the Clearance of Paired Cone Roller Bearings;
减速机螺旋圆锥齿轮啮合侧间隙及成对圆锥滚子轴承间隙调整
The influence of the load distributing in the tooth direction and the superposition degree of cone gear on the transmission;
圆锥齿轮的齿向载荷分布和重合度对传动的影响
Measures to control heat treatment distortion of the cone gears were tested and analyzed.
对如何控制圆锥齿轮热处理畸变进行了试验和分析 ,结果表明 ,通过改变装炉的方式、淬火方法和控制冷却 ,能有效地控制齿轮的畸变 ,解决了生产中的关键问
Reliability Design of Drive Conical Wheel on Steelball-External Conical Wheel Variable Speed Transmission;
钢球—外锥轮式无级变速器传动锥轮的可靠性设计
increment angle
(圆锥齿轮)齿端角
bevel-type differential gear
锥式差动齿轮，差动锥齿轮
bevel pinion and bevel gear set
主动小锥齿轮和被动大锥齿轮副
semi-automatic bevel gear lapper
半自动锥齿轮研齿机
Modules of bevel gears
GB/T12368-1990锥齿轮模数
curve-tooth bevel gear milling
弧齿锥齿轮铣刀盘刃
parallel axis gear combined with right
圆锥平行轴减速齿轮
straight and conical gear shaper
直齿-锥齿轮刨齿机
bevel gear mesh adjusting gasket
锥齿轮啮合调整衬垫
drive pinion cone bearing
主动小齿轮锥形轴承
drive pinion cone bearing cup
传动小齿轮锥形轴承杯
cone type roller bearing rock bit
滚柱轴承锥形牙轮钻头
bevel gear integrated error tester
锥齿轮整体误差测量仪
Analysis of Skewed Tooth Bevel Gear and Straight Tooth Bevel Gear
斜齿圆锥齿轮与直齿圆锥齿轮应力分析研究
curve-tooth bevel gear
弧齿伞齿轮，曲线齿锥齿轮
Terminology for bevel and hypoid gears
GB/T12370-1990锥齿轮和准双曲面齿轮术语
Accuracy of bevel and hypoid gears
GB/T11365-1989锥齿轮和准双曲面齿轮精度