The feeding roller is fixed on the framework of the new nipper rocker shaft,free of the movement of the nipper plate,less of the weight of the nipper plate pack.
采用新的钳板摆动机构使给棉罗拉固接在机架上,不随下钳板移动,减少了下钳板组件的质量;锡林位置下移,下钳板由原来的前后移动变为绕定点摆动,从而使给棉棉花须丛的搭接由原来的被动搭接变为主动搭接,有利于棉花须丛的搭接。
The Influence of Comber Nipper Innovation on Dropping and Combing;
精梳机钳板机构的改进对落棉和梳理的影响
Influence of nipper machine parameter of E62 comber on nipper holding process performance;
E62精梳机钳板机构参数对钳持工艺性能的影响
n this paper, the usage and effects of control nipper of the cotton comber are discussed.
通过实验分析了棉纺精梳机控制钳板的作用及效暴结果表明，采用控制钳板，可使精梳落棉中短纤维增加，长纤维减少，精梳落棉率可降低约２％；使用控制钳板，给棉罗拉与分离罗拉之间增加一控制点，有利于对纤维运动的控制和须丛的分离接合。
The Analysis of the Nipper Mechanism and the Research on the Electrical System of the Combing Machine;
精梳机钳板机构分析与控制系统研究
On Clamping Device of 1500t Stretcher
1500吨拉伸机钳板的损坏与修复
Modeling and Simulation of Nipper Mechanism on Comber Based on Simulink
基于Simulink的精梳机钳板机构建模与仿真
Dynamics Modeling of Nipper Mechanism on Comber with Non-linear Finite Element Method
精梳机钳板机构的非线性动力学模型
The Main Geometric Tolerance in the Nipper Plate Mechanisms Dynamics Analysis
计入主要形位公差的钳板机构动力学分析
He had sometimes seen her with oily hands and carrying a spanner.
他有时看到她双手沾油，拿着板钳。
The Development of Friction Performance Testing Machine Used in Slab Clamp;
板坯夹钳专用摩擦特性实验机的研制
Clamp the two pieces of wood together until the glue dries.
用夹钳把两块木板夹紧, 等胶水干了再松开。
Use long nose pliers or other customized tools to decap the device quickly after the device is taken from the hot plate.
从热板上取下器件，使用尖嘴钳或其它专用工具快速取出器件。
Two tri-roller chockers on forecastle deck found ineffective, to be dismounted, inspected, freed up, regreased and refitted.
艉楼甲板上2只三轮导缆钳失灵，需拆卸，检查，活络，加油并重新装复。
To move or hold with a mechanical device, such as a lever or wrench.
用杠杆移动用如杠杆或板钳等机械装置移开或控制
One that clamps, especially a spiked plate attached to the sole of a shoe to prevent slipping on ice.
防滑钉片钳制的东西，尤指附在鞋底的防止在冰上打滑的带钉平板
B: These are the various kinds of packing for pliers. Normally, we have three types of packing: skin packing, hanging packing, and blister packing.
这些是钳子的各种包装。通常有三种：薄膜包装、式包装、板包装。
appendix intestinal clamp
阑尾肠钳，肠夹持钳
intestinal anastomosis forceps
三翼肠钳，肠吻合钳
piston ring plier(piston ring tongs)
活塞环钳（活塞环拆装钳）
parallel swivel bench vice
平行轮轴钳工台虎钳
The vise (parallel-jaw vice) is available to all of the bench work.
所有的钳工工作都可使用台钳（平口钳）。