formability

基本解释成型性

网络释义

1)formability[fɔ:mə'biliti],成型性2)mechanical properties,成型性能3)formability[fɔ:mə'biliti],成型性能4)Plastic Forming,塑性成型5)Forming property,成型性能6)thermoformability,热成型性

用法和例句

Study on the Formability of Mixed Granulation of Caragana korshinskii Kom.and Medicago sativa Linn.

柠条与苜蓿混合制粒成型性研究

Objective:To screen better excipient and better ratio of the excipients and to improve the formability of the compound Chinese medicine Changle (Saliva Miltiorrhiza) and resistant to moisture of the granules.

目的 :筛选出合适的辅料及其配比 ,改善复方中药长乐方剂的成型性及其颗粒剂的引湿性。

The simulation results show that the formability of fivelayer composite is higher than that of threelayer composite.

通过实验测量了不锈钢/铝合金/不锈钢三层复合板和不锈钢/铝/铝合金/铝/不锈钢五层复合板的各项成型性能指标,并采用刚塑性有限元方法对这2种复合板在有压边力条件下的冲压成型过程进行了计算模拟分析,获得了各组元金属的变形规律以及等效应力、应变分布图。

The effects of batch annealing(BA) and continuous annealing(CA) on mechanical properties and hydrogen storage property of ultra-low-carbon enamelled steels were investigated.

研究了两种不同退火工艺——罩式退火和连续退火工艺对含钛超低碳搪瓷钢板成型性能和贮氢性能的影响。

Recently,IF steel sheets of Baosteel have been used by many domestic automotive factories,however,the production scale is small and the properties sometimes fluctuateSo the effect of technological factors on mechanical properties and formability of IF steel have been investigated based on existing equipment,process technology at BaosteelSuggestions for improving IF steel are proposed

在对宝钢现有装备条件、生产工艺技术以及IF钢产品质量深入调研的基础上,较全面地分析了影响IF钢力学性能与成型性能的工艺因素;讨论了各个工艺环节间的有机联系。

The relationship between structural characteristics of MBWK fabric and bullet-proof properties and formability of composite ballistic helmets for police is analyzed.

分析了MBWK织物的结构特点与警用复合材料防弹头盔的弹道性能和成型性能之间的关系,指出MBWK织物组织点较少,衬纱处于伸直状态,弹击应变波传播速度快,剪切应力小;织物结构整体性好,层间分裂阻抗性高;捆绑系统采用罗纹组织,具有一定的弹性,可以不经折叠或缝接而模压成复杂的曲面形状。

Testing results suggested that: the cold drawability and formability of HP295 hot rolled plate are improved by the effective control of silicate inclusions, composite oxide and sulfide in steel.

根据LPG汽车用钢瓶的结构特点,研究了HP295热轧钢板的力学性能和冷成型性能等综合性能。

In this dissertation, the plastic expansion composite framing theroy and technology for bimetal tube had been researched and the equipment of bimetal tube plastic forming had been investigated.

本文就双金属复合管塑性胀接复合成型理论进行了研究并开发出了复合管塑性成型装置。

The physical significance of forming property indexes n, r value of sheet metal and their effect on the forming technique of various sheet-metal parts are discussed in this paper.

本文详细论述了板料成型性能指数n、r值的物理意义及其对各种钣金率件成型工艺性的影响,结合典型成型工艺,利用钣金冷压成型原理,对n、r值的具体影响进行了分析研究,得出了一些针对具体成型工艺的一般规律性的结论。

The thermoformability of PP foam sheet,BPP modified foam sheet and co extrusion PP foam sheet was studied by comparision.

研究比较了聚丙烯发泡片材、支化聚丙烯改性发泡片材和共挤出发泡片材的热成型性

ANALYSIS OF FACTORS AFFECTING FORMING PROPERTIES OF WET ROLL-FORMING CLAY

湿法辊压成型泥料的成型性能影响因素探讨

Research on the Characters and the Formation Performance of Corn Brace;

玉米苞叶特性及成型性能的试验研究

She has the figure of a mature woman.

她有成年女性的体型。

Composition: It is composed of non-ionic, anionic surfactants and rust-proofing agents.

组成:阴离子型、离子型表面活性剂、锈剂。

Preparation and Thermoelectric Properties of N-type Bismuth Telluride-based Materials;

n型Bi_2Te_3系热电材料成型与性能研究

Study on Synthesis and Properties of Ester-phenolic Antioxidant

新型酚酯型抗氧剂的合成及性能研究

The Flow Analysis of the Injection Molding and Numerical Simulation of Forming Process

注塑成型流动性分析及成型过程数值模拟

SYNTHESIS OF α AND β-CARBYNE (LINEAR CARBON) AND THEIR THERMODYNAMIC STABILITY

α型和β型线型碳的合成及热稳定性研究

Novel Aliphatic Polyurea Elastomer Synthesized with A Modified Diamine

改性二胺合成新型脂肪族聚脲弹性体

Design, Synthesis and Performances of Novel Surfactants;

新型表面活性剂的设计、合成与性能

Study on the Preparation and Properties of IPDI Waterborne Polyurethane;

IPDI型水性聚氨酯的合成与性能研究

A Study of the Synthesis and Modification of Polyester Waterborne Polyurethane

聚酯型水性聚氨酯的合成与改性研究

Synthesis and Properties of New Amide Gemini Surfactant

酰胺型Gemini表面活性剂的合成与性能

Synthesis and Properties of Hyperbranched Aqueous Polyurethane Based on Polycarbonatediol

PCDL型超支化水性聚氨酯的合成与性能

Development of High Performance Tackifiers and Tackifacation/Preforming Technologies for Resin Transfer Molding;

液态成型用高性能定型剂研制与预成型技术研究

Synthesis and Properties of a Novel Zwitterionic Gemini Phosphate Surfactant;

新型两性Gemini磷酸盐表面活性剂的合成与性能

Study on the Synthesis and Properties of Amphoteric Amide Surfactant;

两性酰胺型表面活性剂的合成及性能研究

Study on the Synthesis and Properties of Gemini Amphoteric Surfactant;

Gemini型两性表面活性剂的合成与及性能研究

最新行业英语

行业英语