In this paper 192 groups of girder model with the transverse stiffener were calculated with ANSYS finite element system software.
利用有限元程序ANSYS计算了192组有横向加劲肋的薄腹板简支梁。
To raise the critical stress of the web, we always lay some transverse stiffeners on the web, and also lay some longitudinal stiffeners sometime.
为了提高腹板的临界应力，通常都设有腹板横向加劲肋，有时还在梁中段加设纵向加劲肋。
The experience of parameters selection of pass design and horizontal rib working was summarized.
结合作者在莱钢股份有限公司棒材厂中小型车间多年的生产实践,对带肋钢筋孔型设计及横肋加工参数的选择进行了较详细的分析总结,进而优化了横肋加工参数,使大规格带肋钢筋的性能一次合格率接近100%,且降低了辊耗。
6 software,by adopting the standard k-ε turbulent model,the turbulent boundary layer flow and stickiness resistance of the concave-down horizontal riblets,as well as,the turbulent drag reduction capability by numerical calculation is investigated.
6软件数值求解,考察了带有下凹的横向肋条的湍流边界层流动和黏性阻力,通过数值计算,考察湍流减阻性能,表明在充分发展的湍流场中,横向肋条的减阻效果是很明显的。
Ability and Design of Transverse Stiffener of I Type Tined-web Beam;
薄腹板工形梁横向加劲肋的性能及设计
Buckling of Transverse and Longituded Stiffened Web under Combined Stresses;
同时设纵横向加劲肋的梁腹板在复合应力作用下的屈曲分析
Higher-order Compound Strip Method for Analysis of the Plate Structure with Transverse Stiffeners
布有横向加劲肋的板结构分析的高阶复合有限条法
Experimental and Theoretical Studies of Thin Vertical and Lateral Stiffened Steel Plate Shear Walls;
纵横加劲肋钢板剪力墙试验与理论研究
Model Test and Research about Carrying Capacity of Bridge Deck Slab Stiffened by Lengthways Bars;
纵向加劲肋桥面板受力性能的模型试验研究
Stability of Stiffened Compression Plates of Steel Bridge and Stiffeners Design Method;
钢桥受压加劲板稳定与加劲肋设计方法研究
Analysis of Deflection of Stiffened Plates with Rids under Transverse Load together with the Neutral Plane Forces
加肋板在横向载荷和板中面力共同作用下的挠度分析
The Affection of Lateral Channel Stiffner for the Buckling of Stell Beams;
槽钢加劲肋对钢梁整体稳定性的影响
Experimental Research on the Middle Joint of the Box-column Steel Frame Without Transverse Stiffing Plate;
不设横向加劲板的箱型柱钢框架中节点试验研究
Ultimate Bearing Capacity Analysis of the Middle Joints Which Connect the Steel H Beam of the Steel Frame and No Stiffing Plates Provided in the Box-column
不设横向加劲板箱形柱钢框架中节点有限元分析
The main girders support I-section transverse ribs.
主梁支承着工字梁的横向肋。
Research on Mechanical Properties of Box Gird with Longitudinal Clapboard and Stiffening Rib
箱梁加纵隔板和加劲肋后的力学性能研究
In the end, the design formula of stiffener is put forward which can supply reference to engineering.
最后提出了加劲肋设计公式，供工程参考。
A Method for Directly Determining the Distance of Stiffening Ribsfor Thin Web of Steel Plate Beams
一个直接确定钢板梁腹板加劲肋间距的方法
Research on the Performance of Steel Channels as Stiffeners in Bolted End-plate Beam-to-column Connections;
槽钢加劲肋在梁柱端板螺栓连接中的性能研究
Research on the Mechanical Behavior and Design Method of Trapezoidal Stiffened Plate in Steel Box Girder
钢箱梁梯形肋加劲板受力性能与设计方法研究
The Effect of Stiffener to the Stability of I-steel Beams
加劲肋对工字形钢梁稳定承载力的影响
Buckling of Composite Columns of Lipped-Channel and Hat Sections with Web Stiffener
带加劲肋的帽形卷边槽钢组合柱的屈曲